The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

LOCK_PROFILING (9)
  • >> LOCK_PROFILING (9) ( FreeBSD man: Ядро )

  • BSD mandoc
     

    NAME

    
    
    LOCK_PROFILING
    
     - kernel lock profiling support
    
     
    

    SYNOPSIS

    options LOCK_PROFILING  

    DESCRIPTION

    The LOCK_PROFILING kernel option adds support for measuring and reporting lock use and contention statistics. These statistics are collated by ``acquisition point'' Acquisition points are distinct places in the kernel source code (identified by source file name and line number) where a lock is acquired.

    For each acquisition point, the following statistics are accumulated:

    In addition, the average hold time and average wait time are derived from the total hold time and total wait time respectively and the number of acquisitions.

    The LOCK_PROFILING kernel option also adds the following sysctl(8) variables to control and monitor the profiling code:

    debug.lock.prof.enable
    Enable or disable the lock profiling code. This defaults to 0 (off).
    debug.lock.prof.reset
    Reset the current lock profiling buffers.
    debug.lock.prof.acquisitions
    The total number of lock acquisitions recorded.
    debug.lock.prof.records
    The total number of acquisition points recorded. Note that only active acquisition points (i.e., points that have been reached at least once) are counted.
    debug.lock.prof.maxrecords
    The maximum number of acquisition points the profiling code is capable of monitoring. Since it would not be possible to call malloc(9) from within the lock profiling code, this is a static limit. The number of records can be changed with the LPROF_BUFFERS kernel option.
    debug.lock.prof.rejected
    The number of acquisition points that were ignored after the table filled up.
    debug.lock.prof.hashsize
    The size of the hash table used to map acquisition points to statistics records. The hash size can be changed with the LPROF_HASH_SIZE kernel option.
    debug.lock.prof.collisions
    The number of hash collisions in the acquisition point hash table.
    debug.lock.prof.stats
    The actual profiling statistics in plain text. The columns are as follows, from left to right:

    max
    The longest continuous hold time in microseconds.
    total
    The total (accumulated) hold time in microseconds.
    wait_total
    The total (accumulated) wait time in microseconds.
    count
    The total number of acquisitions.
    avg
    The average hold time in microseconds, derived from the total hold time and the number of acquisitions.
    wait_avg
    The average wait time in microseconds, derived from the total wait time and the number of acquisitions.
    cnt_hold
    The number of times the lock was held and another thread attempted to acquire the lock.
    cnt_lock
    The number of times the lock was already held when this point was reached.
    name
    The name of the acquisition point, derived from the source file name and line number, followed by the name of the lock in parentheses.

     

    SEE ALSO

    sysctl(8), mutex(9)  

    HISTORY

    Mutex profiling support appeared in Fx 5.0 . Generalized lock profiling support appeared in Fx 7.0 .  

    AUTHORS

    An -nosplit The MUTEX_PROFILING code was written by An Eivind Eklund Aq eivind@FreeBSD.org , An Dag-Erling Sm/orgrav Aq des@FreeBSD.org and An Robert Watson Aq rwatson@FreeBSD.org . The code was written by An Kip Macy Aq kmacy@FreeBSD.org . This manual page was written by An Dag-Erling Sm/orgrav Aq des@FreeBSD.org .  

    NOTES

    The LOCK_PROFILING option increases the size of Vt struct lock_object , so a kernel built with that option will not work with modules built without it.

    The LOCK_PROFILING option also prevents inlining of the mutex code, which can result in a fairly severe performance penalty. This is, however, not always the case. LOCK_PROFILING can introduce a substantial performance overhead that is easily monitorable using other profiling tools, so combining profiling tools with LOCK_PROFILING is not recommended.

    Measurements are made and stored in nanoseconds using nanotime(9), (on architectures without a synchronized TSC) but are presented in microseconds. This should still be sufficient for the locks one would be most interested in profiling (those that are held long and/or acquired often).

    LOCK_PROFILING should generally not be used in combination with other debugging options, as the results may be strongly affected by interactions between the features. In particular, LOCK_PROFILING will report higher than normal uma(9) lock contention when run with INVARIANTS due to extra locking that occurs when INVARIANTS is present; likewise, using it in combination with WITNESS will lead to much higher lock hold times and contention in profiling output.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    SEE ALSO
    HISTORY
    AUTHORS
    NOTES


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру