Author: Takashi Iwai <tiwai@suse.de>
Date: Thu Aug 6 12:04:31 2026 +0200
ALSA: dummy: Check card index validity at probe
commit 02442d5fe8ee365a084b055d4fa81a0c1abfc3fd upstream.
snd_dummy_probe() blindly trusts that the given devptr->id value is
within the proper card index range. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Reported-by: syzbot+2fb5d1f7cc4c1f132bcc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/6a73bd4d.01d0871a.3a0d52.0005.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260806100433.1287393-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dawid Wróbel <me@dawidwrobel.com>
Date: Mon Aug 24 18:00:24 2026 -0400
ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses
[ Upstream commit 1ba381759e45d5d0442452cfa5c42e836191a568 ]
The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but
tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their
value through ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but tx-macro was missed.
On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value
sanity check catches the 4 bytes written past the enumerated item
and every read of these controls fails with -EINVAL:
snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Assisted-by: Claude:claude-fable-5
Cc: stable@vger.kernel.org
Signed-off-by: Dawid Wróbel <me@dawidwrobel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730-worktree-lpass-tx-macro-enum-fix-v2-1-6d091c736116@dawidwrobel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[ kept `snd_soc_kcontrol_component()` context line instead of upstream's renamed `snd_kcontrol_chip()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Date: Mon Aug 24 18:06:01 2026 -0400
ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout
[ Upstream commit 17661c67b206612cb3ba65d5ae726cd2015d0a53 ]
Ignore IPC errors for pipeline state change if the firmware state is
crashed or the IPC has timed out.
If the firmware has crashed the kernel still needs to go through the state
changes to reset its internal to be able to correctly work the next time
the DSP is booted up.
The case with IPC timeout is a bit more problematic, but it has been
rootcaused to be the result of system scheduling blockage and the firmware
did actually received and handled the message, but the reply handling got
blocked by issues outside of the SOF stack.
So far the best way to handle this is to continue with setting the state.
Fixes: c40aad7c81e5 ("ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260730112343.26687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Date: Mon Aug 24 18:06:00 2026 -0400
ASoC: SOF: pcm: Add snd_sof_pcm specific wrappers for dev_dbg() and dev_err()
[ Upstream commit 860693187c597645b28a421d8acb26428b8afd3f ]
Introduce spcm_dbg() and spcm_err() macros to provide consistent printing
for debug and error messages which includes usable information in the
print's prefix.
Update the prints in pcm.c, ipc3-pcm.c and ipc4-pcm.c to take advantage of
the features provided by the macros.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250206092828.7569-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 17661c67b206 ("ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Date: Mon Aug 24 18:05:59 2026 -0400
ASoC: SOF: pcm: Move period/buffer configuration print after platform open
[ Upstream commit 4d2ea16576c8aa1437048cf436bff85653f139fe ]
The platform specific pcm_open call via snd_sof_pcm_platform_open() can
modify the initial buffer configuration via constraints.
Move the prints as last step in the sof_pcm_open() function to reflect the
final setup.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250206092828.7569-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 17661c67b206 ("ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Mon Aug 24 18:05:57 2026 -0400
ASoC: sof: pcm: use snd_pcm_direction_name()
[ Upstream commit cda4aa0069b73e3404ee61864b4814ccc7b7a6ad ]
We already have snd_pcm_direction_name(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87mslzk51h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 17661c67b206 ("ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Date: Mon Aug 24 18:05:58 2026 -0400
ASoC: SOF: Relocate and rework functionality for PCM stream freeing
[ Upstream commit 169ec0a541aac8afb215ab591b0fd53276686014 ]
Move the sof_pcm_stream_free() from sof-audio.c to pcm.c as static function
and add wrapper to free all active stream, which is going to be used in
ipc3/4 topology code (removes duplicated code).
With this change most of the PCM stream related code is located in one
source file for easier lookup and simplified flow.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250206092828.7569-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 17661c67b206 ("ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chengfeng Ye <nicoyip.dev@gmail.com>
Date: Thu Jul 30 16:32:02 2026 +0800
Bluetooth: hci_event: fix LE list UAF on reset
commit 33af47e847fe4a28b109673affb5874015d54f5a upstream.
hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.
This permits the reset completion and a debugfs read to interleave as
follows:
hci_rx_work debugfs reader
----------- --------------
lock hdev->lock
fetch current entry
list_del(entry)
kfree(entry)
read entry fields
The reader then dereferences a freed list entry and may follow its stale
next pointer.
KASAN reported:
BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180
Read of size 1 at addr ffff8881015dab16 by task poc/95
Call Trace:
white_list_show+0x15f/0x180
seq_read_iter+0x3ff/0x1190
seq_read+0x267/0x3d0
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
Allocated by task 91:
hci_bdaddr_list_add+0x1a6/0x3a0
hci_cc_le_add_to_accept_list+0xab/0x140
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Freed by task 90:
kfree+0x131/0x3c0
hci_bdaddr_list_clear+0xd8/0x160
hci_cc_reset+0x28a/0x370
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Take hdev->lock around both list clears. This matches the existing
mutation and traversal locking convention.
Fixes: a4d5504d5c39 ("Bluetooth: Clear LE white list when resetting controller")
Fixes: cfdb0c2d095a ("Bluetooth: Store Resolv list size")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Date: Sat Aug 1 23:54:52 2026 +0545
Bluetooth: hci_event: validate LE Set CIG Parameters response
commit 0acd4eeb4b225b9bebbf9ef96cc10cdd79b94899 upstream.
The Command Complete dispatch validates only the fixed part of the LE Set
CIG Parameters response. After that part is pulled from the skb,
hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the
trailing handle array.
Matching num_handles against the command's num_cis does not guarantee
that the response contains the advertised handles. A truncated response
from a malfunctioning controller can therefore make the handler read
beyond the skb data.
Validate that the remaining skb data contains all advertised handles.
Include this in the existing response validation so malformed responses
also follow the established CIG failure handling.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chengfeng Ye <nicoyip.dev@gmail.com>
Date: Thu Jul 23 23:34:40 2026 +0800
Bluetooth: hci_sync: Fix advertising data UAFs
[ Upstream commit cdc36db204ffd97b947d64374cf23a210dc74777 ]
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait.
Fixes: cba6b758711c ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2")
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ali Ahmet Memis <ali@iusegentoo.com>
Date: Fri Aug 7 02:03:44 2026 +0000
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
commit 43a556b2fd43f2df6dded59c2e26560a27874c24 upstream.
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as
"called under rfcomm_lock()". This call site is the only one that skips
it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against
teardown, since __rfcomm_dlc_close() returns early when it wins the
test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and
BT_CONNECT2. With the state already BT_CLOSED that switch does not
match, the bit is never consulted, and __rfcomm_dlc_close() falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving
RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the
test_and_clear and dereferences a NULL session. No timing window is
needed: once the DISC has been processed, the dereference is
unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and
rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and
re-checks the session, around a __rfcomm_dlc_accept() that the two
in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated
over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the
RFCOMM PSM, starts a session, opens a dlc on a channel bound with
BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on
the accepted socket then hits:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rfcomm_dlc_accept+0x54/0x350
Call Trace:
rfcomm_sock_recvmsg+0x1cd/0x230
sock_recvmsg+0x166/0x1c0
__sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the
same run completes with recv() returning 0 and no report, and lockdep
stays quiet, confirming rfcomm_mutex is still taken before lock_sock on
this path as it is on the thread side.
Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kenneth Feng <kenneth.feng@amd.com>
Date: Mon Aug 24 05:56:04 2026 -0400
drm/amd/amdgpu: disable ASPM in some situations
[ Upstream commit c770ef19673fb1defcbde2ee2b91c3c89bfcf164 ]
disable ASPM with some ASICs on some specific platforms.
required from PCIe controller owner.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9c5154a565 ("drm/amdgpu: check ASPM on the dGPU host link")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nathan Lucas <nlucasgit@gmail.com>
Date: Mon Aug 24 05:56:39 2026 -0400
drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix
[ Upstream commit 2f9a5c0f018d4a1586ee892f81f1383219676415 ]
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c78 ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b906e1dc7e3c9ff9f7940f6828b367a6a9ec73c)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Date: Mon Aug 24 05:56:38 2026 -0400
drm/amd/display: Fix BT2020 YCbCr limited/full range input
[ Upstream commit 07bc2dcbcf403d47d6f305ef7f0d3d489491c5fb ]
[Why]
BT2020 YCbCr input is not handled properly when full range
quantization is used and limited range is not supported at all.
[How]
- Add enums for BT2020 YCbCr limited/full range
- Add limited range CSC matrix
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2f9a5c0f018d ("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Wang <kevinyang.wang@amd.com>
Date: Mon Aug 24 05:56:05 2026 -0400
drm/amdgpu: check ASPM on the dGPU host link
[ Upstream commit 2a9c5154a5650c09ad44ff5e1dff74754e15a3c6 ]
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e0d6f2876e704fff707b18c40dbd383aea4a1c9)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guanghui Yang <3497809730@qq.com>
Date: Wed Jul 8 12:57:19 2026 +0000
ext4: clear error before retrying inode xattr space fallback
commit 409a7f12a0933ff2c617fa814c76cef0bd1d457a upstream.
When ext4_xattr_make_inode_space() returns -ENOSPC,
ext4_expand_extra_isize_ea() can retry the expansion with
s_min_extra_isize. If that retry succeeds by finding enough ibody free
space, control jumps directly to the shift label.
The previous -ENOSPC is still stored in error in that path, so the
function can update i_extra_isize but still return -ENOSPC to the
caller. Clear error before retrying so a successful fallback expansion
returns success.
Reproduced with an ext4 image using 1 KiB blocks, project quota support,
256-byte inodes, and min_extra_isize/want_extra_isize set to 32.
FS_IOC_FSSETXATTR failures dropped from 802 to 86 after the fix.
Fixes: 69f3a3039b0d ("ext4: introduce ITAIL helper")
Cc: stable@vger.kernel.org
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/tencent_192F8A699EFD21126E02101131C9546F3C08@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthias Goergens <matthias.goergens@gmail.com>
Date: Sun Aug 2 14:59:41 2026 +0800
ext4: stop retrying saturated xattr cache entries
commit 54b6bd40898de7906acb2bccc9a96d1b8e6b4323 upstream.
ext4_xattr_block_set() retries when a cache entry selected for reuse
has a saturated reference count after taking the buffer lock. The retry
returns to the mbcache lookup without making that entry ineligible, so
it can select the same unusable entry indefinitely. A task spinning
there can hold the parent directory's i_rwsem and leave concurrent
rmdir callers blocked.
Normally a reusable entry has a reference count below
EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are
updated under the same buffer lock. A corrupted filesystem can violate
that invariant. The syzbot reproducer reports allocator and xattr
corruption before triggering this retry loop.
Check the untrusted on-disk count before incrementing it, avoiding
overflow, and clear MBE_REUSABLE_B when it is already saturated. The
next lookup then skips the entry that was just proven unusable. This
mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release
path marks the entry reusable again on the exact 1024-to-1023
transition.
Using the same QEMU harness and guest parameters, current unpatched
Linux hung in 6 of 8 420-second trials with the do_rmdir signature;
representative NMI backtraces caught the owner spinning in
ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials
without a hung-task report; the final twelve trials exercised the
reviewed overflow-safe form of the change. syzbot's patch testing also
completed without reproducing the hang.
Reported-and-tested-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e68dbebd9617a9250e8d
Fixes: 65f8b80053a1 ("ext4: fix race when reusing xattr blocks")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Tested-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260802065941.1726052-1-matthias.goergens@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Junjie Cao <junjie.cao@intel.com>
Date: Fri Jul 31 11:27:47 2026 +0800
gpio: ml-ioh: use raw_spinlock_t for the register lock
commit 600411ea1f2443fdf5b1af9b6480f616d7aff9d0 upstream.
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch.
Fixes: 54be566317b6 ("gpio-ml-ioh: Support interrupt function")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260731032747.2987292-1-junjie.cao@intel.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Fri Jul 3 20:30:02 2026 +0200
HID: core: fix number/pointer type confusion on long items
commit 28abce951343fcec26e397610868efa4e1395c3f upstream.
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this
causes the lower half of a kernel pointer to be printed into dmesg as a
number, like this:
hid (null): invalid report_size 107953555
To fix it, let item_udata() and item_sdata() verify that the item is in
short format.
Note that this bug only affects hid_scan_report(), while the main parsing
pass hid_parse_collections() will always bail out when encountering a long
item.
Sidenote: There are currently no users of data.longdata; maybe we should
just remove any parsing of long-format descriptors as a follow-up.
Fixes: 3dc8fc083dbf ("HID: Use hid_parser for pre-scanning the report descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baul Lee <baul.lee@xbow.com>
Date: Sun Jul 26 15:50:24 2026 +0900
HID: core: fix OOB read of field->usage in hid_set_field()
commit a13cdb19fcb223ed41bdab3bab42b98dba87e90b upstream.
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Bommarito <michael.bommarito@gmail.com>
Date: Thu Jul 9 22:28:53 2026 -0400
HID: hyperv: validate initial device info bounds
commit 934b7778aa7b7c8f6bb073d2a73ba3674885bae0 upstream.
The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO
messages that contain a HID descriptor followed by the report descriptor
bytes. mousevsc_on_receive_device_info() trusts bLength and
wDescriptorLength without checking that the received packet contains both
byte ranges.
A malformed host or backend message can therefore make the guest read
past the received VMBus packet while copying the report descriptor. Pass
the received initial-device-info size into the parser and reject
descriptor lengths that exceed the packet.
Impact: A malicious Hyper-V host or backend can crash a guest by sending
a short initial device-info message with an oversized HID report
descriptor length.
Fixes: b95f5bcb811e ("HID: Move the hid-hyperv driver out of staging")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Date: Tue Jul 28 22:15:57 2026 -0600
HID: magicmouse: do not keep a stale msc->input if no input is claimed
commit 0af3b89705688af01aa06025b84fa7a1e06ba6cc upstream.
magicmouse_input_mapping() caches the first hid_input's input_dev in
msc->input while the report descriptor is parsed, and the rest of the
driver treats a non-NULL msc->input as proof that an input device was
registered.
That does not hold on the hid-input error path. If hidinput_connect()
fails -- for instance because input_register_device() returns an error --
it unwinds through hidinput_disconnect(), which frees every input_dev it
created, including the one cached in msc->input.
The failure does not abort the probe. hid_connect() only skips the claim:
if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
connect_mask & HID_CONNECT_HIDINPUT_FORCE))
hdev->claimed |= HID_CLAIMED_INPUT;
and the "device has no listeners" bailout below it does not fire for this
driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad
2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore
returns 0 and magicmouse_probe() continues with msc->input pointing at
freed memory. Being non-NULL, it passes the "input not registered" check
in probe and the NULL checks in ->raw_event and ->event, so the next
input report dereferences freed memory.
Clear msc->input when the HID core did not claim an input device, so the
existing NULL checks cover this case as well.
Fixes: f1a9a149abc8 ("HID: magicmouse: fix race between input_register() and probe()")
Link: https://lore.kernel.org/linux-input/20260728185542.65F091F000E9@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Reviewed-by: Alec Hall <signshop.alec@gmail.com>
Tested-by: Alec Hall <signshop.alec@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrei Fed <andfed.net@gmail.com>
Date: Mon Jul 6 19:55:07 2026 +0200
HID: magicmouse: fix battery reporting for Bluetooth Magic Trackpad USB-C
commit a1556b48efc157fdda07b52ecc56c7bd1e1786f0 upstream.
The Apple Magic Trackpad 2 (USB-C) reports a wildly wrong battery
capacity over Bluetooth, for example a constant 4% for a pack that is
actually at 74%.
The device's battery input report (0x90) is laid out as
[report-id][status][charge]. hid-input's synchronous capacity query,
hidinput_query_battery_capacity(), assumes the common
[report-id][capacity] layout and returns buf[1], which for this device
is the status byte rather than the charge (buf[2]).
magicmouse_fetch_battery(), which requests the battery report through
hid_hw_request() so the reply is decoded via the report descriptor at
the correct field offset, is gated to the USB models and never runs
over Bluetooth. The device does not push battery reports on its own
either, except a single one at connect time, which is delivered while
probe holds driver_input_lock and is silently dropped. All userspace
reads therefore go through the misparsing query, and the device is
stuck reporting its status byte as the capacity.
Enabling the fetch for Bluetooth is not sufficient on its own: user
space reacts to the power_supply registration immediately, so a query
is typically already in flight when the fetch reply is parsed.
hidinput_get_battery_property() stores the query result and marks the
battery as queried without rechecking whether a report arrived while
it was waiting, clobbering the just-reported correct value with the
misparsed one.
Fix this by adding HID_BATTERY_QUIRK_AVOID_QUERY for the Bluetooth
Magic Trackpad USB-C so the misparsing query path is never used, and
by fetching the battery at the end of probe for this device. hidp has
no asynchronous request() callback, so the fetch is serviced
synchronously via __hid_request() while probe still holds
driver_input_lock; call hid_device_io_start() first so the reply is
processed instead of being discarded.
Tested with a Magic Trackpad USB-C (004c:0324) over Bluetooth on
6.18.37: the reported capacity now matches the device (verified against
a raw GET_REPORT of report 0x90) and updates on reconnect.
Fixes: 87a2f10395c8 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Andrei Fed <andfed.net@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lee Jones <lee@kernel.org>
Date: Thu Apr 16 14:16:54 2026 +0100
HID: magicmouse: Prevent out-of-bounds (OOB) read during DOUBLE_REPORT_ID
commit d93ba918a185aca2594da63e92fdc5495b559c0f upstream.
It is currently possible for a malicious or misconfigured USB device to
cause an out-of-bounds (OOB) read when submitting reports using
DOUBLE_REPORT_ID by specifying a large report length and providing a
smaller one.
Let's prevent that by comparing the specified report length with the
actual size of the data read in from userspace. If the actual data
length ends up being smaller than specified, we'll politely warn the
user and prevent any further processing.
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ibrahim Hashimov <security@auditcode.ai>
Date: Wed Jul 15 13:52:53 2026 +0200
HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler()
commit 27b376b945c0aac46fcdfcc950b14a85b874b557 upstream.
joycon_ctlr_read_handler() casts an incoming HID input report to
struct joycon_input_report and parses it, guarding the cast only with a
12-byte length check:
if (size >= 12) /* make sure it contains the input report */
joycon_parse_report(ctlr, (struct joycon_input_report *)data);
struct joycon_input_report is 49 bytes: a 13-byte header followed by a
union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report()
-> joycon_parse_imu_report() walks that union (struct offsets 13..48),
so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes
the guard yet is read up to 37 bytes past its declared length. The
over-read bytes are decoded into accelerometer/gyroscope values and
forwarded to userspace through the "(IMU)" input device, leaking
driver-internal memory. data[0] and size are fully controlled by a
malicious or spoofed Joy-Con/Pro Controller.
Receive buffers are sized to the maximum report length, so this is an
over-read within the allocation rather than a slab OOB, but the decoded
bytes still reach userspace.
The sibling subcmd path in joycon_ctlr_handle_event() already bounds the
same cast correctly:
if (size < sizeof(struct joycon_input_report) ||
data[0] != JC_INPUT_SUBCMD_REPLY)
break;
Use the same sizeof(struct joycon_input_report) bound here.
Fixes: 2af16c1f846b ("HID: nintendo: add nintendo switch controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Tue Jul 7 15:15:44 2026 +0800
HID: sensor: custom: Fix use-after-free in enable_sensor
commit ad8fb82b04422f49530d2aa2753cc81d1c60102c upstream.
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260623021950.1736413-1-haoxiang_li2024@163.com?part=1
Fixes: 4a7de0519df5 ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Aug 21 12:51:43 2026 -0400
inet: frags: add inet_frag_putn() helper
[ Upstream commit ae2d90355aa5592b0e99c8bbb4c3fa1d8e205f1b ]
inet_frag_putn() can release multiple references
in one step.
Use it in inet_frags_free_cb().
Replace inet_frag_put(X) with inet_frag_putn(X, 1)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 653d7ddf6cba ("inet: frags: publish queues before arming timer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Aug 21 12:51:45 2026 -0400
inet: frags: change inet_frag_kill() to defer refcount updates
[ Upstream commit eb0dfc0ef195a04e519b15d73cf25d8c25ee8df7 ]
In the following patch, we no longer assume inet_frag_kill()
callers own a reference.
Consuming two refcounts from inet_frag_kill() would lead in UAF.
Propagate the pointer to the refs that will be consumed later
by the final inet_frag_putn() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 653d7ddf6cba ("inet: frags: publish queues before arming timer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhiling Zou <zhilinz@nebusec.ai>
Date: Fri Aug 21 12:51:47 2026 -0400
inet: frags: publish queues before arming timer
[ Upstream commit 653d7ddf6cba867777a3d14c4f83ace008c5ad13 ]
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference.
Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Aug 21 12:51:46 2026 -0400
inet: frags: save a pair of atomic operations in reassembly
[ Upstream commit ca0359df45a55a9eb4d6dc09a481064abf78320f ]
As mentioned in commit 648700f76b03 ("inet: frags:
use rhashtables for reassembly units"):
A followup patch will even remove the refcount hold/release
left from prior implementation and save a couple of atomic
operations.
This patch implements this idea, seven years later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250312082250.1803501-5-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 653d7ddf6cba ("inet: frags: publish queues before arming timer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Date: Mon Aug 24 11:19:08 2026 -0400
Input: atkbd - skip deactivate for HONOR FMB-P's internal keyboard
[ Upstream commit 2aaf33c6e1e82561d7dce2345298a985a2483266 ]
After commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd -
do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID"), HONOR
FMB-P, aka HONOR MagicBook Pro 14 2025's internal keyboard stops
working. Adding the atkbd_deactivate_fixup quirk fixes it.
DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025
Fixes: 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Reported-by: Mikura Kyouka <mikurakyouka@aosc.io>
Reported-by: foad.elkhattabi <foad.elkhattabi@gmail.com>
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251022-honor-v1-1-ff894ed271a9@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 410c44b10967 ("Input: atkbd - skip deactivate for HONOR ZQC-P")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Donglin Lyu <DongLin_Lyu@outlook.com>
Date: Mon Aug 24 11:19:09 2026 -0400
Input: atkbd - skip deactivate for HONOR ZQC-P
[ Upstream commit 410c44b1096789d0c40fbee706520e981dba7bc1 ]
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9fbf ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Linmao Li <lilinmao@kylinos.cn>
Date: Mon Jul 20 14:12:59 2026 +0800
Input: byd - synchronize timer deletion before freeing private data
commit c83e79c0842ed29860648bcce5022ef0ba5001c6 upstream.
byd_disconnect() uses timer_delete() before freeing the driver's private
data. This does not wait for a running byd_clear_touch() callback, which
dereferences the private data and its psmouse pointer. A callback racing
with disconnect can therefore access the private data after it has been
freed. The timer can also still be re-armed by byd_process_byte() while
the disconnect is in progress.
Use timer_shutdown_sync() before freeing the private data: it waits for
a running callback and turns any later re-arm attempt into a no-op.
Fixes: 2d5f5611dd0d ("Input: byd - enable absolute mode")
Cc: stable@vger.kernel.org
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260720061259.1601281-1-lilinmao@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ changed `del_timer()` to `timer_shutdown_sync()` since 6.12 predates the `del_timer()` → `timer_delete()` rename ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Aug 21 12:51:44 2026 -0400
ipv4: frags: remove ipq_put()
[ Upstream commit a2fb987c0ecf0498cc17056339cb11d128c46ab7 ]
Replace ipq_put() with inet_frag_putn()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 653d7ddf6cba ("inet: frags: publish queues before arming timer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yong Wang <edragain@163.com>
Date: Fri Aug 14 01:35:26 2026 +0800
ipv4: reject undersized MTUs in ip_do_fragment()
commit c0726f0caf8c6b3208552949e17d23634a2f3129 upstream.
ip_do_fragment() subtracts the IPv4 header length from the effective
MTU and passes the resulting payload MTU to ip_frag_next().
If the effective MTU is smaller than hlen + 8, ip_frag_next() rounds
the fragment payload length down to zero. The fragmentation state then
never makes forward progress: state->left, state->ptr and state->offset
stay unchanged while ip_do_fragment() keeps allocating and transmitting
header-only fragments until the softlockup detector fires.
This is reproducible with a route installed using "mtu lock 20", but it
is also reproducible without route MTU lock, for example by forwarding a
packet to a device whose MTU is 20.
Fix it in ip_do_fragment() by rejecting mtu < hlen + 8 with -EMSGSIZE,
matching the existing IPv6 fragmentation check.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Yong Wang <edragain@163.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/8809ef6314b98913681b0b370a05a85c2b6cd579.1786599079.git.edragain@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luxiao Xu <rakukuip@gmail.com>
Date: Wed Aug 12 20:54:38 2026 +0800
ipv6: fix use-after-free in ip6_finish_output2()
commit d0d48d999b0eee6bb176ef4e39d9be868fa80f7e upstream.
ip6_finish_output2() caches a pointer to the IPv6 destination
address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF
transmit path or other encapsulation operations within
lwtunnel_xmit() can reallocate the skb head, freeing the memory
that daddr points to. When lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale
daddr pointer to compute the nexthop and to look up or create the
neighbour entry. This results in a use-after-free read, which can
leak sensitive kernel data, pollute the neighbour table with
arbitrary values, misdirect traffic, or crash the system.
Fix this by re-fetching the IPv6 header and the destination
address pointer after lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop
computation and neighbour lookup operate on valid memory.
Fixes: e415ed3a4b8b ("ipv6: use skb_expand_head in ip6_finish_output2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/4aa3f53bc44e79572c6dd2340ec7b68ef1a3d87d.1786516730.git.rakukuip@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu Jul 16 08:01:29 2026 +0900
kcov: fix data corruption and race conditions on PREEMPT_RT
commit 2eed77fdcb0cc48e8eccb2bcd4b7f2c6d650e84c upstream.
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems.
Link: https://lore.kernel.org/43552d09-2ce2-4b19-b0d3-a2d1ab952145@I-love.SAKURA.ne.jp
Reported-by: syzbot+3f51ad7ac3ae57a6fdcc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3f51ad7ac3ae57a6fdcc
Reported-by: syzbot+47cf95ca1f9dcca872c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=47cf95ca1f9dcca872c8
Reported-by: syzbot+8a173e13208949931dc7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a173e13208949931dc7
Reported-by: syzbot+90984d3713722683112e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=90984d3713722683112e
Analyzed-by: AI Mode in Google Search (no mail address)
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pavitra Jha <jhapavitra98@gmail.com>
Date: Wed Jul 8 01:39:41 2026 -0400
libceph: fix OOB read in decode_watchers() via missing bounds check
commit 00ead17c7de137a692edee59f2772e6af687e8eb upstream.
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ]
Cc: stable@vger.kernel.org
Fixes: a4ed38d7a180 ("libceph: support for CEPH_OSD_OP_LIST_WATCHERS")
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[ kept the tree's `kcalloc()` context line instead of upstream's `kzalloc_objs()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Aug 27 14:29:48 2026 +0200
Linux 6.6.154
Link: https://lore.kernel.org/r/20260825132541.813800447@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Wentao Guan <guanwentao@uniontech.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qing Luo <luoqing@kylinos.cn>
Date: Mon Aug 24 18:05:57 2026 -0400
mptcp: pm: fix data race in add_addr timer callback
[ Upstream commit a7aad5b69d3bdaec20a3ed9284e184502450c0cd ]
The timer callback reads entry->retrans_times outside pm.lock to decide
whether to call mptcp_pm_subflow_established(). Since
mptcp_pm_announced_del_timer() can concurrently set retrans_times =
ADD_ADDR_RETRANS_MAX under pm.lock, a race condition exists.
I discovered this issue while studying the code. AI tools helped me to
verify the issue can potentially happen under race conditions.
Use a local 'retransmit' flag set inside pm.lock to capture whether
retransmission is still possible when the lock is taken. This allows to
call mptcp_pm_subflow_established() accordingly, and not depending on
the situation that can be different when checked outside the pm.lock.
Fixes: 348d5c1dec60 ("mptcp: move to next addr when timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-4-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied to mptcp_pm_add_timer() in pm_netlink.c instead of pm.c and collapsed the adaptive backoff branch to `if (!retransmit) timeout = 0;` since the tree lacks exponential ADD_ADDR retransmission timeouts ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shardul Bankar <shardul.b@mpiricsoftware.com>
Date: Tue Aug 25 07:29:56 2026 -0400
mptcp: pm: fix memory leak from alloc-during-teardown race
[ Upstream commit efc33b5102ff859bacd390a5f30112d8e0c084c0 ]
mptcp_pm_destroy() empties msk->pm.anno_list and
msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket
teardown, dropping the lock between the two.
A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock
reference via mptcp_token_get_sock() and, in
mptcp_pm_nl_announce_doit(), calls
mptcp_userspace_pm_append_new_local_addr() and
mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to
their respective lists. Because the genl handler holds a sock reference,
mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which
invokes mptcp_destroy_common() without dropping the sock refcount,
before the handler completes.
If the lock acquisitions interleave such that mptcp_pm_destroy() empties
a list first, the later alloc adds its entry to a list head that nothing
else iterates for this msk, and the entry leaks. kmemleak reports both
mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and
mptcp_pm_addr_entry objects (from
mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent
ANNOUNCE + close load against the userspace PM.
Add an MPTCP_PM_DESTROYING bit in msk->pm.status, set by
mptcp_pm_destroy() under pm.lock before the lists are emptied and
checked under pm.lock by the alloc paths. Either the alloc takes pm.lock
first, in which case its entry is on the list when mptcp_pm_destroy()
frees it; or mptcp_pm_destroy() takes pm.lock first, in which case the
later alloc observes the bit and refuses.
Found by an MPTCP protocol-flow harness extending BRF (arXiv:2305.08782).
Fixes: 9ab4807c84a4 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-6-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Inlined `mptcp_pm_destroy()` at its call site in `mptcp_destroy_common()` and moved the fences into the pre-rename `mptcp_pm_alloc_anno_list()`/`mptcp_free_local_addr_list()` equivalents, deleting the `mptcp_pm_is_userspace()` guard from inside the callee instead of the call site. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 14 14:07:05 2025 +0000
ndisc: ndisc_send_redirect() cleanup
commit 0784d83df3bfc977c13252a0599be924f0afa68d upstream.
ndisc_send_redirect() is always called under rcu_read_lock().
It can use dev_net_rcu() and avoid one redundant
rcu_read_lock()/rcu_read_unlock() pair.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214140705.2105890-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Aug 27 06:08:01 2026 +0000
net: gro: properly validate BIG TCP aggregation criteria
When GRO attempts to aggregate packets beyond GRO_LEGACY_MAX_SIZE (64KB),
BIG TCP should only be permitted for plain IPv4 TCP and plain IPv6 TCP
(with sufficient MAC header room to insert the temporary HBH jumbo header).
However, commit b1a78b9b9886 ("net: add support for ipv4 big tcp")
loosened the check in skb_gro_receive(), leading to several issues:
1. skb_gro_receive() checked skb_headroom(p) instead of the actual space
before the MAC header (p->mac_header). Because skb_headroom(p) includes
mac_len, crafted frames (e.g. injected via AF_PACKET) can pass the check
with p->mac_header < 8 bytes. When ipv6_gro_complete() inserts the
temporary HBH jumbo header, the memmove() starts before skb->head,
causing an out-of-bounds write and wrapping skb->mac_header.
2. It allowed non-IP protocols such as software VLAN (ETH_P_8021Q /
ETH_P_8021AD) to aggregate beyond 64KB because
p->protocol != ETH_P_IPV6 was true.
3. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark,
allowing encapsulated flows (e.g. SIT / IPv6-in-IPv4) to aggregate
beyond 64KB.
Fix skb_gro_receive() to strictly enforce:
- NAPI_GRO_CB(skb)->proto == IPPROTO_TCP
- Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation)
- Protocol must be either ETH_P_IP or ETH_P_IPV6
- If ETH_P_IPV6, p->mac_header must be at least
sizeof(struct hop_jumbo_hdr)
Returning -E2BIG from skb_gro_receive() ensures that packets which cannot
become BIG TCP are cleanly flushed at <= 64KB and delivered intact without
dropping.
This issue does not exist in mainline (7.0+) because the subsystem was
rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX
side"), making this fix relevant only for older stable branches like
6.18.y.
Fixes: 0fe79f28bfaf ("net: allow gro_max_size to exceed 65536")
Fixes: b1a78b9b9886 ("net: add support for ipv4 big tcp")
Reported-by: Sam Dlinn <sledge@meta.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Wed Jun 3 16:13:55 2026 +0200
nfc: digital: clamp SENSF_RES length to the destination buffer
commit 344a56d7c8e0f3cbaff0bcb1bcd95a1a1db24b16 upstream.
digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote
NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res
field without an upper-bound check. A nearby malicious NFC-F device can
send an oversized SENSF_RES response to overflow the stack-local struct
nfc_target.
Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 8c0695e4998d ("NFC Digital: Add NFC-F technology support")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260603141355.68156-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bryam Vargas <hexlabsecurity@proton.me>
Date: Tue Jun 16 23:33:35 2026 -0500
nfc: fdp: bound the device-reported read length and fix an skb leak
commit 7ad21dcfeb5181af0c3ee2608808c0c0a5283aa1 upstream.
fdp_nci_i2c_read() takes the next packet length from two device-supplied
bytes and never validates it. The value is a u16 used as the
i2c_master_recv() count into a 261-byte on-stack buffer: a malicious,
counterfeit or malfunctioning controller (or an i2c bus interposer) can
drive it far past the buffer for a stack out-of-bounds write that
clobbers the canary and return address, or below the minimum frame size
(directly, or by truncating the computed sum) so the header/LRC strip
and the next length read run past a short receive. Reject a length
outside [FDP_NCI_I2C_MIN_PAYLOAD, FDP_NCI_I2C_MAX_PAYLOAD], as a
corrupted packet already is, and force resynchronization.
The same loop allocates one data skb per iteration and assumes a length
packet followed by a data packet; a device that sends two data packets
in one call leaks the first skb when the second allocation overwrites
it. Free a previously allocated skb before allocating the next.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Cc: stable@vger.kernel.org
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260616-b4-disp-b1f8ab4c-v2-1-2d1fe5955325@proton.me
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Thu Jul 9 15:12:29 2026 +0200
nfc: llcp: bound the connect_sn TLV walk to the skb
commit 55c68ac93e7dacc0f5f608b9c39dd4ff48cf28e8 upstream.
Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and
add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(),
and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in
TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and
nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same
pattern remains unbounded: nfc_llcp_connect_sn().
nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header
(type, length) followed by length bytes of value, without checking that
the two header bytes or the declared length stay within the buffer. It
returns a pointer to a service name of up to 255 bytes that may point
past the end of the skb; it is subsequently consumed by memcmp() in
nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as
"skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter
than the LLCP header underflows to a huge length and the walk runs far
past the buffer.
nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and
nfc_llcp_recv_cc(), i.e. from received CONNECT and CC PDUs. A nearby
NFC device can reach this without authentication; LLCP link activation
happens automatically after NFC-DEP, and the nfc_llcp_rx_skb()
dispatcher applies no minimum-length guard.
Walk the TLV list by pointer, bounded by skb_tail_pointer(skb), and
validate each declared length before use, matching the approach already
used for nfc_llcp_recv_snl(). Starting the walk at
&skb->data[LLCP_HEADER_SIZE] against the tail pointer also removes the
size_t underflow for short frames.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709131229.44477-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Muhammad Bilal <meatuni001@gmail.com>
Date: Mon Jun 22 18:18:02 2026 +0500
nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers
commit 78b20c8eeacd2e44a2d8a4cb5316d3c521d90911 upstream.
nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain
three related bugs in their TLV parsing loops:
1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data
advances offset past 255 it silently wraps to zero, causing
infinite loops or double-processing of buffer data.
2. Before reading tlv[0] (type) and tlv[1] (length) there is no
check that offset+2 <= tlv_array_len. A truncated TLV causes
an OOB read of one byte past the buffer end.
3. After reading the length field, the value bytes are accessed
without checking offset+2+length <= tlv_array_len. A crafted
length=0xFF on a short buffer causes up to 255 bytes of OOB
read past the buffer end.
Both functions are reachable without authentication via
nfc_llcp_set_remote_gb() which feeds remote LLCP general bytes
directly into nfc_llcp_parse_gb_tlv() with no additional
validation.
Fix all three issues by widening offset from u8 to u16 and adding
bounds checks for both the TLV header and value field before each
access.
Fixes: 3df40eb3a2ea ("nfc: constify several pointers to u8, char and sk_buff")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260622131802.239035-1-meatuni001@gmail.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Tue Jul 14 18:46:31 2026 +0200
nfc: llcp: reject PDUs shorter than the LLCP header
commit 95674f506c6376d6722a23144c9acd26609771ed upstream.
Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the
receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes
before parsing it.
nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/
nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a
CONNECT or CC PDU then computes
tlv_array_len = skb->len - LLCP_HEADER_SIZE;
as a size_t and hands it to the TLV walk. When the frame is shorter than
the header the subtraction wraps to a huge value and the walk runs far
past the buffer, an out-of-bounds read.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Guard the common receive choke point __nfc_llcp_recv(), shared by both the
target (nfc_llcp_data_received()) and initiator (nfc_llcp_recv()) paths, so
a short skb is dropped before the rx_work worker parses it. Use
pskb_may_pull() rather than a skb->len test so the two header bytes are
guaranteed to sit in the skb linear area even for a non-linear skb,
matching how the sibling NCI and HCI receive paths validate their headers.
Reproduced with a KFENCE out-of-bounds read via /dev/virtual_nci on
linux-next.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: stable@vger.kernel.org
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260714164631.75068-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pengpeng Hou <pengpeng@iscas.ac.cn>
Date: Thu Jul 23 10:37:20 2026 +0800
nfc: microread: validate target discovery payload lengths
commit 25519469972ef57c3edb1805dabd6c5612b90211 upstream.
microread_target_discovered() parses target discovery payloads from
skb->data according to the HCI gate. The fixed field offsets and UID
copies were checked only against the destination nfc_target buffers, not
against the actual skb length.
Validate that each gate-specific payload contains the fixed fields and
UID bytes before reading or copying them.
Fixes: cfad1ba87150 ("NFC: Initial support for Inside Secure microread")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260723103508.1-microread-v2-pengpeng@iscas.ac.cn
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Samuel Page <sam@bynar.io>
Date: Mon Jun 22 16:52:43 2026 +0200
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
commit ac200079db50af81e6b04d058b33ec92901d8edd upstream.
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the
limit. The append then writes a struct nfc_target past the end of the
array (a slab out-of-bounds write), and nfc_targets_found() goes on to
walk the array with the inflated count:
BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]
Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12
Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]
Call trace:
nci_add_new_protocol+0x94/0x2ac [nci]
nci_ntf_packet+0xddc/0x11a0 [nci]
nci_rx_work+0x15c/0x1e0 [nci]
process_one_work+0x2dc/0x500
worker_thread+0x240/0x460
kthread+0x1c0/0x1d0
ret_from_fork+0x10/0x20
The buggy address belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1024 bytes to the right of
allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)
Guard nci_target_auto_activated() with the same check used by
nci_add_new_target().
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260622145243.3167276-1-sam@bynar.io
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Samuel Page <sam@bynar.io>
Date: Fri Jun 26 10:03:01 2026 +0100
nfc: nci: fix uninit-value in the RF discover/activated NTF handlers
commit 8cbe06c1e699c0a165dae5093a2550e65f914818 upstream.
nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each
parse a notification into an on-stack struct (nci_rf_discover_ntf /
nci_rf_intf_activated_ntf) that is not initialised. The RF
technology-specific parameters are only extracted when
rf_tech_specific_params_len is non-zero, so a notification that reports a
zero length leaves the rf_tech_specific_params union uninitialised - and
both handlers then pass it to nci_add_new_protocol(), which reads it:
- discover: nci_add_new_target() -> nci_add_new_protocol();
- activated: nci_target_auto_activated() -> nci_add_new_protocol().
nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch
condition and a memcpy() length and copies nfcid1/sens_res/sel_res into
ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET.
BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0
nci_add_new_protocol+0x624/0x6c0
nci_ntf_packet+0x25b2/0x3c30
nci_rx_work+0x318/0x5d0
process_scheduled_works+0x84b/0x17a0
worker_thread+0xc10/0x11b0
kthread+0x376/0x500
Local variable ntf.i created at:
nci_ntf_packet+0xbc2/0x3c30
Zero-initialise both on-stack notifications so the union reads back as
zero when no technology-specific parameters are present.
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Fixes: e8c0dacd9836 ("NFC: Update names and structs to NCI spec 1.0 d18")
Link: https://lore.kernel.org/netdev/20260623172109.1105965-2-horms@kernel.org/
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Link: https://patch.msgid.link/20260626090301.2139500-1-sam@bynar.io
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Linmao Li <lilinmao@kylinos.cn>
Date: Tue Jul 21 10:35:18 2026 +0800
nfc: nci: free destination parameters when closing a connection
commit 2e65bafdfd3a8bba972b3d17b6a57816557530fc upstream.
When a connection is closed, nci_core_conn_close_rsp_packet() frees
conn_info but not conn_info->dest_params, which is a separate devm
allocation. Each connect/close cycle leaks one dest_params until the
NFC device is removed. Free dest_params along with conn_info.
Fixes: 9b8d1a4cf2aa ("nfc: nci: Add an additional parameter to identify a connection id")
Cc: stable@vger.kernel.org
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260721023518.1697625-1-lilinmao@kylinos.cn
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xu Rao <raoxu@uniontech.com>
Date: Mon Jul 20 10:14:44 2026 +0800
nfc: pn533: purge fragmented skbs during cleanup
commit 5718fc62198c38c2de5316020a90506f9e75e0bb upstream.
pn53x_common_clean() purges resp_q before freeing the common PN533 state,
but it leaves fragment_skb untouched. The fragmentation helpers queue
transmit fragments there while sending large initiator or target-mode
frames, and those skbs remain owned by the driver until they are sent or
discarded.
If the device is removed while fragments are still queued, the common
cleanup path frees the PN533 state without releasing the queued fragment
skbs, leaking them.
Purge fragment_skb during cleanup alongside resp_q.
Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/2D896607CAE4408E+20260720021444.3362044-1-raoxu@uniontech.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Sat Jul 11 09:13:01 2026 +0200
nfc: st21nfca: validate ATR_REQ length against the received frame
commit 5cdcca5d62a66eda6b774110a44cba67bc1a8d1d upstream.
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested.
Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260711071301.58071-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Koichiro Den <den@valinux.co.jp>
Date: Thu Aug 20 18:27:57 2026 -0400
NTB: ntb_netdev: Preserve RX queue depth on allocation failure
[ Upstream commit d2121faf133ac3bf9531b53a7e21273649a08517 ]
ntb_netdev_rx_handler() hands the received skb to the network stack
before allocating its replacement. If the allocation fails, nothing is
reposted. Every failure therefore takes one buffer out of the RX queue
while the interface remains up, and enough failures eventually stall
reception.
A retry path could refill the queue later, but ntb_netdev has none.
Allocate the replacement first instead. If that fails, drop the packet
and repost the same skb. This keeps the queue full and lets packet
delivery resume as soon as memory is available again.
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260806032537.3526498-1-den@valinux.co.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ kept HEAD's `struct net_device *ndev = qp_data;` declaration instead of the per-queue context variables, adding only `new_skb` to the existing `skb` declaration ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rik van Riel <riel@surriel.com>
Date: Sat Aug 8 11:42:39 2026 -0400
null_blk: fix UBSAN shift-out-of-bounds when zone_size is 0 or overflows
commit 95491fb05105b61050cb623a5e0227eb26aa3525 upstream.
null_zone_no() does sect >> ilog2(dev->zone_size_sects). When
zone_size_sects is 0, ilog2(0) returns -1, producing shift exponent -1
which UBSAN reports as shift-out-of-bounds.
UBSAN: shift-out-of-bounds in drivers/block/null_blk/zoned.c:21:14
shift exponent -1 is negative
Call Trace:
null_zone_no drivers/block/null_blk/zoned.c:21 [inline]
null_process_zoned_cmd+0xf76/0xf80 drivers/block/null_blk/zoned.c:728
null_handle_cmd drivers/block/null_blk/main.c:1455 [inline]
null_queue_rq+0x8bc/0xe70 drivers/block/null_blk/main.c:1703
__blk_mq_issue_directly block/blk-mq.c:2694 [inline]
blk_mq_try_issue_directly+0x3f4/0x880 block/blk-mq.c:2754
blk_mq_submit_bio+0x20c0/0x2a40 block/blk-mq.c:3208
submit_bio_noacct_nocheck+0x2f4/0xa40 block/blk-core.c:790
block_read_full_folio+0x7a6/0x810 fs/buffer.c:2463
filemap_read_folio+0x12c/0x3a0 mm/filemap.c:2510
read_part_sector+0xb6/0x2b0 block/partitions/core.c:724
adfspart_check_ICS+0xb1/0x960 block/partitions/acorn.c:357
check_partition block/partitions/core.c:143 [inline]
blk_add_partitions block/partitions/core.c:591 [inline]
bdev_disk_changed+0x851/0x17a0 block/partitions/core.c:695
blkdev_get_whole+0x372/0x510 block/bdev.c:751
add_disk_final block/genhd.c:412 [inline]
add_disk_fwnode+0x24b/0x3a0 block/genhd.c:606
null_add_dev+0x130b/0x1d70 drivers/block/null_blk/main.c:2052
nullb_device_power_store+0x240/0x380 drivers/block/null_blk/main.c:501
configfs_write_iter+0x337/0x430 fs/configfs/file.c:229
Syzkaller triggers this by creating a zoned null_blk device via
configfs. The Call Trace shows configfs_write_iter in configfs/file.c
handling a write to power file, which calls nullb_device_power_store in
main.c, which calls null_add_dev in main.c, which calls add_disk in
genhd.c, which triggers partition scan via bdev_disk_changed in
partitions/core.c.
A zoned null_blk device with zone_size 0 should not be legal. Existing
code tries to reject it via is_power_of_2() check in zoned.c and
!zone_size check in main.c, but syzkaller can still reach
null_zone_no() with zone_size_sects 0 via two paths:
1. Direct 0 via configfs: zone_size attribute store in main.c has
NULLB_DEVICE_ATTR(zone_size, ulong, NULL) with no validation callback,
so echo 0 > zone_size succeeds before power store. If zoned is false
at power store time, the !zone_size check in main.c is skipped, and
later zoned set true leaves zone_size 0.
2. Large value overflow: mb_to_sects() in zoned.c does
(sector_t)mb * SZ_1M >> SECTOR_SHIFT which is mb * 2048. If mb is
1UL << 53 (9PB), mb * 2048 overflows 64-bit to 0. The value is
power-of-two so is_power_of_2() passes, but mb_to_sects() returns 0.
Check for zero zone_size explicitly in null_init_zoned_dev() in
zoned.c, returning -EINVAL with "must be non-zero power-of-two".
Check for zero zone_size_sects after mb_to_sects() conversion,
returning -EINVAL for overflow case. Keep defensive check in
null_zone_no() returning 0 for zero sectors to avoid shift out-of-bounds
even if zero slips through.
This change should be safe because zone_size is set once in
null_init_zoned_dev() under device lock and never changes after, and 0
is never valid for a zoned device. Returning -EINVAL at init time fails
device creation early with clear error, while defensive return 0 in
null_zone_no() makes zoned command fail via offline zone check.
No new locking is introduced.
Reported-by: syzbot+abd6a8dca0f2b7726060@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=abd6a8dca0f2b7726060
Link: https://lore.kernel.org/all/6a75205c.01d0871a.3a0d52.0033.GAE@google.com/
Fixes: 8a3cf049af68 ("null_blk: add zoned block device emulation")
Cc: stable@vger.kernel.org
Assisted-by: Hermes:muse-spark-1.2 syzkaller
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260808114239.69167f68@fangorn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bryam Vargas <hexlabsecurity@proton.me>
Date: Thu Jul 2 03:45:14 2026 -0500
nvmet-auth: zero the AUTH_RECEIVE response buffer
commit 3ddcfb013322aa37eaa7a0d344b73079c38dfa21 upstream.
nvmet_execute_auth_receive() allocates the response buffer with kmalloc()
sized by the host-supplied AUTH_RECEIVE allocation length, but the
DH-HMAC-CHAP builders write only a fixed-size message into it. The full
allocation length is then copied to the wire by nvmet_copy_to_sgl(), so a
remote initiator receives the bytes past the built message -- up to nearly
a page of uninitialized slab -- during the pre-authentication handshake.
Allocate the buffer with kzalloc() so the unwritten tail is zeroed before
it is sent; conforming responses are unaffected.
Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiang HongHui <jiang_hh2019@163.com>
Date: Wed Jul 29 19:02:06 2026 +0800
nvmet-fc: fix invalid free in LS IOD error path
commit ba98d6796d12258e837ece065d2ecb59d76ce4ff upstream.
nvmet_fc_alloc_ls_iodlist() advances iod while initializing the LS IOD
array. If an rqstbuf allocation or response buffer DMA mapping fails,
the unwind loop decrements iod past the start of the array. The final
kfree(iod) therefore frees an address before the allocated object.
This can be reproduced with nvme-fcloop and failslab by setting
fail-nth to 6 before creating a target port. KASAN reports:
BUG: KASAN: invalid-free in nvmet_fc_register_targetport
Free of addr ffff88816cf8ff48 by task nvmet_fail_nth/9552
Free the original allocation base stored in tgtport->iod instead. With
this fix applied, the same sysfs write with fail-nth=6 returns -ENOMEM
without any KASAN report.
Fixes: c53432030d86 ("nvme-fabrics: Add target support for FC transport")
Cc: stable@vger.kernel.org
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Assisted-by: Codex:gpt-5
Signed-off-by: Jiang HongHui <jiang_hh2019@163.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Jul 27 22:03:31 2026 +0200
nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations
commit 737a3b535247226f6e1a7988fd9d6e63e7d6fc71 upstream.
When fuzzing the nvme target code, I tripped a kernel warning in
nvmet_tcp_map_data() because the length passed into the allocator is
controlled by the remote initiator.
A remote initiator that sends a command with an SGL claiming a huge
number, can create a scatterlist and iovec allocation of over 1 million
entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER
and then the page allocator will trip on a WARN_ON_ONCE_GFP() message:
WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
...
sgl_alloc_order
nvmet_tcp_map_data
nvmet_tcp_try_recv_pdu
As it's never good to trip a kernel warning remotely due to many systems
having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to
the allocation flags.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ian Bridges <icb@fastmail.org>
Date: Thu Jul 23 23:57:03 2026 -0500
ocfs2: fix missing metadata reservation for large xattrs
commit 0cdc7dde00ec63ac714271fa8b2918d630b8da1a upstream.
[BUG]
lsetxattr() panics the kernel when setting a large xattr value on a
fragmented filesystem where the file already has an external xattr
block.
[CAUSE]
ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new
xattr value's extent tree when the file already has an external xattr
block. The not_found path leaves meta_add at zero, so meta_ac is NULL
when ocfs2_xattr_extend_allocation() runs.
A new value root has room for a single extent record. On a fragmented
filesystem, the allocator cannot satisfy the xattr value in one
contiguous run, so each non-contiguous run requires its own extent
record. When the value root's extent list is full and meta_ac is NULL,
ocfs2_add_clusters_in_btree() returns RESTART_META, and
ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META).
[FIX]
The case where no xattr block exists yet already calls
ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree
metadata. Add the same reservation to the case where an xattr block
already exists, making the two cases consistent.
Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is
returned despite the reservation, the error propagates to userspace
instead of panicking the kernel.
Link: https://lore.kernel.org/amLwn3i9tET8yhG7@dev
Fixes: a78f9f466894 ("ocfs2: make xattr extension work with new local alloc reservation.")
Signed-off-by: Ian Bridges <icb@fastmail.org>
Reported-by: syzbot+e538032956b1157914a3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e538032956b1157914a3
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steffen Persvold <spersvold@gmail.com>
Date: Thu Jul 9 14:24:46 2026 +0200
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
commit 008cb88edb41f3c7c8e0ed763ff9f26719830984 upstream.
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef23387 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260709122446.3151899-1-spersvold@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Aditya Chillara <aditya.chillara@oss.qualcomm.com>
Date: Thu Aug 20 18:28:10 2026 -0400
perf/core: Fix group leader use-after-free after sibling detach
[ Upstream commit 42c5ca1f0a288a52878bd72a5595b08261057438 ]
perf_group_detach() handles leader and sibling detach differently. When the
group leader is detached, all siblings are promoted to singleton events and
their group_leader pointer is reset to themselves. When a sibling is
detached, it is removed from the leader's sibling_list, but its
group_leader pointer is left pointing at the old leader.
That is harmless when the sibling is being closed and freed immediately, as
in the DETACH_DEAD path. It is not safe when the sibling is detached but
kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the
sibling is removed from the context, while its file descriptor can still
keep it alive.
A typical failing sequence is:
- A group contains leader L and sibling S.
- CPU hot-unplug detaches S with DETACH_GROUP, removing it from
L->sibling_list but leaving S->group_leader == L.
- L is later closed and freed.
- A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and
dereferences the freed leader.
This was reproduced by running the perf event fuzzer, CPU hotplug, and a
stress workload concurrently:
Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb
CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT
pc : perf_ioctl+0x34c/0xc68
x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b
Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908)
Call trace:
perf_ioctl+0x34c/0xc68 (P)
__arm64_sys_ioctl+0xa0/0xf4
invoke_syscall+0x58/0xe4
el0_svc_common+0xa8/0xdc
do_el0_svc+0x1c/0x28
el0_svc+0x40/0xc0
el0t_64_sync_handler+0x68/0xdc
el0t_64_sync+0x1c4/0x1c8
The fault happened in perf_ioctl(), where perf_event_for_each() follows
the stale group_leader pointer and perf_event_for_each_child() then
dereferences the freed leader's context.
Fix the use-after-free by promoting the detached sibling to a singleton.
Also fix __event_disable() cgroup accounting and event state change.
Fixes: 8a49542c0554 ("perf_events: Fix races in group composition")
Assisted-by: PatchWise:gpt-5.5
Signed-off-by: Aditya Chillara <aditya.chillara@oss.qualcomm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260807-fix-group-leader-uaf-v3-1-b0c2310c9a0d@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Zijlstra <peterz@infradead.org>
Date: Thu Aug 20 18:28:09 2026 -0400
perf: Unify perf_event_free_task() / perf_event_exit_task_context()
[ Upstream commit 90661365021a6d0d7f3a2c5046ebe33e4df53b92 ]
Both perf_event_free_task() and perf_event_exit_task_context() are
very similar, except perf_event_exit_task_context() is a little more
generic / makes less assumptions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193723.274039710@infradead.org
Stable-dep-of: 42c5ca1f0a28 ("perf/core: Fix group leader use-after-free after sibling detach")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Griffin Kroah-Hartman <griffin@kroah.com>
Date: Thu Jul 9 14:24:01 2026 +0200
rndis_host: add overflow check in rndis_rx_fixup()
commit 965a251f23ff69cfb4486974d4532e9bb551c7fc upstream.
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Shaoxu Liu <shaoxul@foxmail.com>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2026070900-denim-brook-52d4@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Tue Jul 28 05:30:17 2026 +0200
s390/vfio_ccw: Calculate idal length based on idaw type
commit 4f6fdc6e1a7fbfa36b945af33c65a417948feac0 upstream.
Sashiko pointed out that get_guest_idal() unconditionally calculates
the length of the IDAL presuming everything is a Format-2 IDAW.
The output of vfio-ccw is always Format-2, but the input can be either
Format-1 (31-bit addresses) or Format-2 (64-bit addresses). As a result,
the size of the guest IDAL may be incorrect and should be trimmed down.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260720203400.7328E1F000E9@smtp.kernel.org/
Fixes: 1b676fe3d9d3 ("vfio/ccw: handle a guest Format-1 IDAL")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[farman@linux.ibm.com: resolved merge conflict]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Tue Jul 28 05:30:16 2026 +0200
s390/vfio_ccw: Ensure first IDAW remains constant
commit 565bef268d75bf7df665bce6923a88cd0eb74592 upstream.
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with.
Fixes: 01aa26c672c0 ("s390/cio: Combine direct and indirect CCW paths")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[farman@linux.ibm.com: resolved merge conflict]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Tue Jul 28 05:30:13 2026 +0200
s390/vfio_ccw: Free all memory if cp_init() fails
commit 74186c2968f8f756ac3226b545b598457c910c75 upstream.
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic.
Fixes: 8b515be512a2 ("vfio-ccw: Fix memory leak and don't call cp_free in cp_init")
Cc: stable@vger.kernel.org
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[farman@linux.ibm.com: resolve build error]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Tue Jul 28 05:30:22 2026 +0200
s390/vfio_ccw: Implement a crw lock
commit 16b0798024c0e9117e395829ddbbe70981c79d9c upstream.
Unlike the channel_program struct, which covers synchronous I/O
submissions and asynchronous interrupts, the CRW region relies
exclusively on asynchronous events coming from hardware.
Implement a lock to manage the list of those payloads, to ensure
they are read cohesively.
Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[farman@linux.ibm.com: resolved merge conflict]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fan Wu <fanwu01@zju.edu.cn>
Date: Thu Aug 20 18:28:04 2026 -0400
serial: amba-pl011: synchronize DMA teardown
[ Upstream commit 440915499231e9db1c361aa45bb702e8fd3b4a32 ]
dmaengine_terminate_all() does not wait for a running callback, so the TX
callback can still touch the TX buffer after it is freed. The RX poll
timer reads the RX buffers without the port lock.
Switch to dmaengine_terminate_sync() and delete the RX timer before
freeing the buffers.
Fixes: ead76f329f77 ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-4-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ changed upstream's `timer_delete_sync()` deletion to match this tree's `del_timer_sync()` spelling at the old call site ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Sebastian Götte <linux@jaseg.de>
Date: Fri Aug 21 00:00:04 2026 -0400
serial: qcom-geni: fix TX DMA buffer flush
[ Upstream commit e3c04834ae1ab5e9cfbe8ac54ec734aa4774249d ]
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1.
Assisted-by: Claude:claude-5-opus Codex:gpt-5
Signed-off-by: Jan Sebastian Götte <linux@jaseg.de>
Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Reviewed-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729174105.21838-2-git@jaseg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Inlined `__qcom_geni_serial_cancel_tx_cmd()` as the existing open-coded cancel/abort block and dropped the `flush_buffer`→`flush_buffer_fifo` rename and `tx_queued` reset, which don't exist in this tree. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lech Perczak <lech.perczak@camlingroup.com>
Date: Fri Aug 21 07:00:05 2026 -0400
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
[ Upstream commit d2e8590fd1048c5c0dba160edc6a48ee8305a1f0 ]
Now that bit definition comments were cleaned up, convert bitmask
definitions to use BIT() macro for clarity.
Convert SC16IS7XX_IIR_ID_MASK to use GENMASK() macro -
- while at that, realign comments.
Compose SC16IS7XX_LSR_BRK_ERROR_MASK using aforementioned constants,
instead of open-coding it, and remove now unneeded comments.
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/8b45a01e-7cc5-4d53-b467-c6680bc51ef4@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luca Fresi <luca.fresi@bithiatec.com>
Date: Fri Aug 21 07:00:08 2026 -0400
serial: sc16is7xx: enable THRI before filling TX FIFO
[ Upstream commit 246ac114f485c2affb454240f3ea4fabfce22456 ]
sc16is7xx_handle_tx() currently requests the THRI enable only after it has
filled the TX FIFO. The request is asynchronous because the IER update is
performed later by reg_work.
The SC16IS7xx generates a THRI interrupt when the TX FIFO crosses its
trigger level. If the FIFO drains past that level before reg_work enables
THRI, the chip does not generate a new interrupt. Characters remain queued
indefinitely even though the hardware FIFO is empty.
This was observed on an SC16IS752 while both UART channels were active.
During the stall the software TX buffer remained non-empty while TXLVL
reported 64 bytes free, LSR reported THR and transmitter empty, IER had
THRI enabled, and IIR reported no interrupt pending.
Enable THRI synchronously before filling the FIFO so the threshold crossing
cannot be missed.
Fixes: cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop")
Cc: stable <stable@kernel.org>
Signed-off-by: Luca Fresi <luca.fresi@bithiatec.com>
Link: https://patch.msgid.link/20260721222404.204746-1-luca.fresi@bithiatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lech Perczak <lech.perczak@camlingroup.com>
Date: Fri Aug 21 07:00:04 2026 -0400
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
[ Upstream commit eccdb0fd1c340155666533f5c60c5229d370baab ]
Comments attached to bits 0 and 1 incorrectly referenced bits 2 and 3,
which don't match the datasheet - fix them.
At the same time remove comments for individual constants, as they add
nothing to the definitions themselves.
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/2986a485-935d-4ab2-9a16-4a85288aa15a@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Date: Fri Aug 21 07:00:06 2026 -0400
serial: sc16is7xx: rename EFR mutex with generic name
[ Upstream commit d9b2d7ddbb973b981c20b21e9228581bb156f66f ]
This mutex is used as a lock when accessing registers that share the same
address space, not necessarily EFR registers.
For example, address 0x06 is shared by MSR, TCR and XOFF1 registers,
independently of EFR.
Rename the mutex with a more generic name to avoid misinterpreting its
usage.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Date: Fri Aug 21 07:00:07 2026 -0400
serial: sc16is7xx: use guards for simple mutex locks
[ Upstream commit 0f4f88bfd7e7bf3f3293045fffdc63586b0a889f ]
Guards can help to make the code more readable, so use them wherever they
do so.
In sc16is7xx_port_irq(), labels and 'rc' locals are eliminated completely.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xiang Mei (Microsoft) <xmei5@asu.edu>
Date: Sat Jun 27 02:40:23 2026 +0000
xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
[ Upstream commit c283e9ada7fcb7dd4b10592623086b2e6d2f9925 ]
xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(),
i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with
rcu_dereference_protected(), stores NULL and dst_release()s the old dst.
That is only safe if no other thread modifies sk_dst_cache concurrently.
For a connected UDP socket that does not hold: the transmit fast path
(udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly
with an atomic xchg(). A per-socket policy change racing a send can make
both sides observe the same old dst and each dst_release() it, dropping
the socket's single reference twice and freeing the xfrm_dst bundle while
it is still referenced:
BUG: KASAN: slab-use-after-free in dst_release
Write of size 4 at addr ffff88801897b6c0 by task exploit/155
Call Trace:
...
dst_release (... ./include/linux/rcuref.h:109)
xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053)
do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347)
ip_setsockopt (net/ipv4/ip_sockglue.c:1417)
do_sock_setsockopt (net/socket.c:2368)
__sys_setsockopt (net/socket.c:2393)
__x64_sys_setsockopt (net/socket.c:2396)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Reachable by an unprivileged user via a user+network namespace.
Use the atomic sk_dst_reset() so the cache is cleared and released with a
single xchg(): whichever side wins releases the dst once, the other sees
NULL and does nothing. Behaviour is otherwise unchanged.
Fixes: 2b06cdf3e688 ("xfrm: Clear sk_dst_cache when applying per-socket policy.")
Fixes: be8f8284cd89 ("net: xfrm: allow clearing socket xfrm policies.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ibrahim Hashimov <security@auditcode.ai>
Date: Sun Aug 23 20:09:24 2026 -0400
xfs: bounds-check buffer log item's dirty bitmap
[ Upstream commit 813f8136a2ce1fee266d02a7df73db6e8a541604 ]
xlog_recover_do_reg_buffer() replays each dirty region described by a
buffer log item's bitmap into the buffer read for that item:
memcpy(xfs_buf_offset(bp, (uint)bit << XFS_BLF_SHIFT),
item->ri_buf[i].iov_base,
nbits << XFS_BLF_SHIFT);
The destination offset (bit/nbits, from the logged dirty bitmap) and the
buffer size (from the logged blf_len) are both attacker-controlled and
otherwise unrelated, yet the only thing bounding the copy is an ASSERT(),
which compiles away on production kernels. A crafted image logging a
small blf_len together with a bitmap bit past the end of that buffer
drives the memcpy() past the buffer's allocation, corrupting adjacent
kernel heap during mount-time log recovery. This is reachable by anyone
who can get a crafted image mounted -- the malicious-filesystem threat
model XFS already guards against elsewhere.
Turn the ASSERT() into a real XFS_IS_CORRUPT() check that aborts recovery
of the buffer with -EFSCORRUPTED, consistent with the validate-and-fail
idiom already used in xlog_recover_do_inode_buffer() and
xfs_dquot_item_recover.c. xlog_recover_do_reg_buffer() therefore becomes
STATIC int and its three callers propagate the error.
Found and confirmed with KASAN on a CONFIG_XFS_DEBUG=n build: the crafted
image trips a slab-out-of-bounds write before this change and fails
recovery cleanly with -EFSCORRUPTED after it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christoph Hellwig <hch@lst.de>
Date: Sun Aug 23 20:09:23 2026 -0400
xfs: don't use a xfs_log_iovec for ri_buf in log recovery
[ Upstream commit ded74fddcaf685a9440c5612f7831d0c4c1473ca ]
ri_buf just holds a pointer/len pair and is not a log iovec used for
writing to the log. Switch to use a kvec instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Stable-dep-of: 813f8136a2ce ("xfs: bounds-check buffer log item's dirty bitmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hongling Zeng <zenghongling@kylinos.cn>
Date: Tue Jul 28 15:43:40 2026 +0800
xfs: validate attr entry pointer before field access
commit b7eea80be25f3334f131d52982b3131aba77b97d upstream.
xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen,
valuelen) before checking if the entry pointer itself is within bounds.
If nameidx is crafted to point near the end of the buffer, these field
accesses can read out-of-bounds before the bounds check at
name_end > buf_end is performed.
Add explicit bounds checks for entry pointers before accessing their
fields. Use offsetof() to check that the start of the flexible array
member (nameval/name) is within bounds, which ensures all preceding
fields are safe to access.
Fixes: c84760659dcf2 ("xfs: check attribute leaf block structure")
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>