Author: Aaron Erhardt <aer@tuxedocomputers.com>
Date: Wed Feb 18 22:32:10 2026 +0100
ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6
commit d649c58bcad8fb9b749e3837136a201632fa109d upstream.
Depending on the timing during boot, the BIOS might report wrong pin
capabilities, which can lead to HDMI audio being disabled. Therefore,
force HDMI audio connection on TUXEDO InfinityBook S 14 Gen6.
Signed-off-by: Aaron Erhardt <aer@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260218213234.429686-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shawn Guo <shawnguo@kernel.org>
Date: Fri Feb 27 15:22:10 2026 +0800
arm64: dts: hisilicon: hi3798cv200: Add missing dma-ranges
commit 1af997cad473d505248df6d9577183bb91f69670 upstream.
Reboot starts failing on Poplar since commit 8424ecdde7df ("arm64: mm:
Set ZONE_DMA size based on devicetree's dma-ranges"), which effectively
changes zone_dma_bits from 30 to 32 for arm64 platforms that do not
properly define dma-ranges in device tree. It's unclear how Poplar reboot
gets broken by this change exactly, but a dma-ranges limiting zone_dma to
the first 1 GB fixes the regression.
Fixes: 2f20182ed670 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shawn Guo <shawnguo@kernel.org>
Date: Fri Feb 27 15:19:58 2026 +0800
arm64: dts: hisilicon: poplar: Correct PCIe reset GPIO polarity
commit c1f2b0f2b5e37b2c27540a175aea2755a3799433 upstream.
The PCIe reset GPIO on Poplar is actually active low. The active high
worked before because kernel driver didn't respect the setting from DT.
This is changed since commit 1d26a55fbeb9 ("PCI: histb: Switch to using
gpiod API"), and thus PCIe on Poplar got brken since then.
Fix the problem by correcting the polarity.
Fixes: 32fa01761bd9 ("arm64: dts: hi3798cv200: enable PCIe support for poplar board")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Date: Sat Feb 21 19:15:19 2026 +0100
arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage up to 0.85V
commit 511f76bf1dce5acf8907b65a7d1bc8f7e7c0d637 upstream.
The minimal voltage of VDD_SOC sourced from BUCK1 is 0.81V, which
is the currently set value. However, BD71837 only guarantees accuracy
of ±0.01V, and this still doesn't factor other reasons for actual
voltage to slightly drop in, resulting in the possibility of running
out of the operational range.
Bump the voltage up to 0.85V, which should give enough headroom.
Cc: stable@vger.kernel.org
Fixes: 8f0216b006e5 ("arm64: dts: Add a device tree for the Librem 5 phone")
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Fri Oct 18 10:39:55 2024 +0200
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
commit 8219a455efd4ba11c1d30c1bbc9ce853466c19bf upstream.
When the DSI to eDP bridge was added, pin control for the IRQ pin was
left out, because the pin controller did not support INTC-EX pins yet.
Commit 10544ec1b3436037 ("pinctrl: renesas: r8a779g0: Add INTC-EX
pins, groups, and function") added support for these pins, so add the
missing pin control description.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/89bab2008891be1f003a3c0dbcdf36af3b98da70.1729240573.git.geert+renesas@glider.be
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Thu Apr 9 18:12:56 2026 +0800
ASoC: simple-card-utils: Don't use __free(device_node) at graph_util_parse_dai()
[ Upstream commit de74ec718e0788e1998eb7289ad07970e27cae27 ]
commit 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for
device node") uses __free(device_node) for dlc->of_node, but we need to
keep it while driver is in use.
Don't use __free(device_node) in graph_util_parse_dai().
Fixes: 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node")
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Reported-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/87eczisyhh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Haoze Xie <royenheart@gmail.com>
Date: Mon Apr 6 21:17:28 2026 +0800
batman-adv: hold claim backbone gateways by reference
commit 82d8701b2c930d0e96b0dbc9115a218d791cb0d2 upstream.
batadv_bla_add_claim() can replace claim->backbone_gw and drop the old
gateway's last reference while readers still follow the pointer.
The netlink claim dump path dereferences claim->backbone_gw->orig and
takes claim->backbone_gw->crc_lock without pinning the underlying
backbone gateway. batadv_bla_check_claim() still has the same naked
pointer access pattern.
Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate
on a stable gateway reference until the read-side work is complete.
This keeps the dump and claim-check paths aligned with the lifetime
rules introduced for the other BLA claim readers.
Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Fixes: 04f3f5bf1883 ("batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ao Zhou <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ruide Cao <caoruide123@gmail.com>
Date: Thu Apr 2 23:12:31 2026 +0800
batman-adv: reject oversized global TT response buffers
commit 3a359bf5c61d52e7f09754108309d637532164a6 upstream.
batadv_tt_prepare_tvlv_global_data() builds the allocation length for a
global TT response in 16-bit temporaries. When a remote originator
advertises a large enough global TT, the TT payload length plus the VLAN
header offset can exceed 65535 and wrap before kmalloc().
The full-table response path still uses the original TT payload length when
it fills tt_change, so the wrapped allocation is too small and
batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object
before the later packet-size check runs.
Fix this by rejecting TT responses whose TVLV value length cannot fit in
the 16-bit TVLV payload length field.
Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Ruide Cao <caoruide123@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chaitanya Kulkarni <kch@nvidia.com>
Date: Fri Apr 10 15:55:28 2026 +0800
blktrace: fix __this_cpu_read/write in preemptible context
[ Upstream commit da46b5dfef48658d03347cda21532bcdbb521e67 ]
tracing_record_cmdline() internally uses __this_cpu_read() and
__this_cpu_write() on the per-CPU variable trace_cmdline_save, and
trace_save_cmdline() explicitly asserts preemption is disabled via
lockdep_assert_preemption_disabled(). These operations are only safe
when preemption is off, as they were designed to be called from the
scheduler context (probe_wakeup_sched_switch() / probe_wakeup()).
__blk_add_trace() was calling tracing_record_cmdline(current) early in
the blk_tracer path, before ring buffer reservation, from process
context where preemption is fully enabled. This triggers the following
using blktests/blktrace/002:
blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed]
runtime 0.367s ... 0.437s
something found in dmesg:
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
...
(See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message)
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
[ 81.362895] check_preemption_disabled+0xce/0xe0
[ 81.362902] tracing_record_cmdline+0x10/0x40
[ 81.362923] __blk_add_trace+0x307/0x5d0
[ 81.362934] ? lock_acquire+0xe0/0x300
[ 81.362940] ? iov_iter_extract_pages+0x101/0xa30
[ 81.362959] blk_add_trace_bio+0x106/0x1e0
[ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0
[ 81.362979] ? lockdep_init_map_type+0x58/0x260
[ 81.362988] submit_bio_wait+0x56/0x90
[ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250
[ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10
[ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0
[ 81.363051] blkdev_read_iter+0xc1/0x140
[ 81.363059] vfs_read+0x20b/0x330
[ 81.363083] ksys_read+0x67/0xe0
[ 81.363090] do_syscall_64+0xbf/0xf00
[ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 81.363106] RIP: 0033:0x7f281906029d
[ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec
[ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d
[ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000
[ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000
[ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000
[ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a
[ 81.363142] </TASK>
The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(),
and blk_add_trace_rq() paths as well.
The purpose of tracing_record_cmdline() is to cache the task->comm for
a given PID so that the trace can later resolve it. It is only
meaningful when a trace event is actually being recorded. Ring buffer
reservation via ring_buffer_lock_reserve() disables preemption, and
preemption remains disabled until the event is committed :-
__blk_add_trace()
__trace_buffer_lock_reserve()
__trace_buffer_lock_reserve()
ring_buffer_lock_reserve()
preempt_disable_notrace(); <---
With this fix blktests for blktrace pass:
blktests (master) # ./check blktrace
blktrace/001 (blktrace zone management command tracing) [passed]
runtime 3.650s ... 3.647s
blktrace/002 (blktrace ftrace corruption with sysfs trace) [passed]
runtime 0.411s ... 0.384s
Fixes: 7ffbd48d5cab ("tracing: Cache comms only after an event occurred")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: robbieko <robbieko@synology.com>
Date: Wed Mar 25 18:18:15 2026 +0800
btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()
[ Upstream commit 316fb1b3169efb081d2db910cbbfef445afa03b9 ]
After commit 1618aa3c2e01 ("btrfs: simplify return variables in
lookup_extent_data_ref()"), the err and ret variables were merged into
a single ret variable. However, when btrfs_next_leaf() returns 0
(success), ret is overwritten from -ENOENT to 0. If the first key in
the next leaf does not match (different objectid or type), the function
returns 0 instead of -ENOENT, making the caller believe the lookup
succeeded when it did not. This can lead to operations on the wrong
extent tree item, potentially causing extent tree corruption.
Fix this by returning -ENOENT directly when the key does not match,
instead of relying on the ret variable.
Fixes: 1618aa3c2e01 ("btrfs: simplify return variables in lookup_extent_data_ref()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: robbieko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Sterba <dsterba@suse.com>
Date: Thu Jan 9 11:24:19 2025 +0100
btrfs: make wait_on_extent_buffer_writeback() static inline
[ Upstream commit 075adeeb9204359e8232aeccf8b3c350ff6d9ff4 ]
The simple helper can be inlined, no need for the separate function.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 316fb1b3169e ("btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Tue Jan 20 19:52:10 2026 +0000
btrfs: remove pointless out labels from extent-tree.c
[ Upstream commit ea8f9210050136bdd14f5e32b04cd01c8bd5c0ca ]
Some functions (lookup_extent_data_ref(), __btrfs_mod_ref() and
btrfs_free_tree_block()) have an 'out' label that does nothing but
return, making it pointless. Simplify this by removing the label and
returning instead of gotos plus setting the 'ret' variable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 316fb1b3169e ("btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Sterba <dsterba@suse.com>
Date: Thu Jan 9 11:24:40 2025 +0100
btrfs: remove unused define WAIT_PAGE_LOCK for extent io
[ Upstream commit db9eef2ea8633714ccdcb224f13ca3f3b5ed62cc ]
Last use was in the readahead code that got removed by f26c9238602856
("btrfs: remove reada infrastructure").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 316fb1b3169e ("btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Vacek <neelx@suse.com>
Date: Tue Mar 25 17:31:38 2025 +0100
btrfs: remove unused flag EXTENT_BUFFER_CORRUPT
[ Upstream commit c61660ec341e65650e58c92d0af71184aa216ff0 ]
This flag is no longer being used. It was added by commit a826d6dcb32d
("Btrfs: check items for correctness as we search") but it's no longer
being used after commit f26c92386028 ("btrfs: remove reada
infrastructure").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 316fb1b3169e ("btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Vacek <neelx@suse.com>
Date: Tue Mar 25 17:31:37 2025 +0100
btrfs: remove unused flag EXTENT_BUFFER_READAHEAD
[ Upstream commit 350362e95fbbe86008c240093697756d52049686 ]
This flag is no longer being used. It was added by commit ab0fff03055d
("btrfs: add READAHEAD extent buffer flag") and used in commits:
79fb65a1f6d9 ("Btrfs: don't call readahead hook until we have read the entire eb")
78e62c02abb9 ("btrfs: Remove extent_io_ops::readpage_io_failed_hook")
371cdc0700c7 ("btrfs: introduce subpage metadata validation check")
Finally all the code using it was removed by commit f26c92386028 ("btrfs: remove
reada infrastructure").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 316fb1b3169e ("btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Sterba <dsterba@suse.com>
Date: Thu Jan 9 11:24:43 2025 +0100
btrfs: split waiting from read_extent_buffer_pages(), drop parameter wait
[ Upstream commit 248c4ff3935252a82504c55cfd3592e413575bd0 ]
There are only 2 WAIT_* values left for wait parameter, we can encode
this to the function name if the waiting functionality is split.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 316fb1b3169e ("btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Date: Wed Apr 1 12:10:07 2026 +0200
drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat
commit 4c71fd099513bfa8acab529b626e1f0097b76061 upstream.
A use-after-free / refcount underflow is possible when the heartbeat
worker and intel_engine_park_heartbeat() race to release the same
engine->heartbeat.systole request.
The heartbeat worker reads engine->heartbeat.systole and calls
i915_request_put() on it when the request is complete, but clears
the pointer in a separate, non-atomic step. Concurrently, a request
retirement on another CPU can drop the engine wakeref to zero, triggering
__engine_park() -> intel_engine_park_heartbeat(). If the heartbeat
timer is pending at that point, cancel_delayed_work() returns true and
intel_engine_park_heartbeat() reads the stale non-NULL systole pointer
and calls i915_request_put() on it again, causing a refcount underflow:
```
<4> [487.221889] Workqueue: i915-unordered engine_retire [i915]
<4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0
...
<4> [487.222707] Call Trace:
<4> [487.222711] <TASK>
<4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915]
<4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915]
<4> [487.223566] __engine_park+0xb9/0x650 [i915]
<4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915]
<4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915]
<4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915]
<4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915]
<4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915]
<4> [487.226178] i915_request_retire+0x1c/0x40 [i915]
<4> [487.226625] engine_retire+0x122/0x180 [i915]
<4> [487.227037] process_one_work+0x239/0x760
<4> [487.227060] worker_thread+0x200/0x3f0
<4> [487.227068] ? __pfx_worker_thread+0x10/0x10
<4> [487.227075] kthread+0x10d/0x150
<4> [487.227083] ? __pfx_kthread+0x10/0x10
<4> [487.227092] ret_from_fork+0x3d4/0x480
<4> [487.227099] ? __pfx_kthread+0x10/0x10
<4> [487.227107] ret_from_fork_asm+0x1a/0x30
<4> [487.227141] </TASK>
```
Fix this by replacing the non-atomic pointer read + separate clear with
xchg() in both racing paths. xchg() is a single indivisible hardware
instruction that atomically reads the old pointer and writes NULL. This
guarantees only one of the two concurrent callers obtains the non-NULL
pointer and performs the put, the other gets NULL and skips it.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/15880
Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats")
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/d4c1c14255688dd07cc8044973c4f032a8d1559e.1775038106.git.sebastian.brzezinka@intel.com
(cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jouni Högander <jouni.hogander@intel.com>
Date: Fri Mar 27 13:45:53 2026 +0200
drm/i915/psr: Do not use pipe_src as borders for SU area
commit 75519f5df2a9b23f7bf305e12dc9a6e3e65c24b7 upstream.
This far using crtc_state->pipe_src as borders for Selective Update area
haven't caused visible problems as drm_rect_width(crtc_state->pipe_src) ==
crtc_state->hw.adjusted_mode.crtc_hdisplay and
drm_rect_height(crtc_state->pipe_src) ==
crtc_state->hw.adjusted_mode.crtc_vdisplay when pipe scaling is not
used. On the other hand using pipe scaling is forcing full frame updates and all the
Selective Update area calculations are skipped. Now this improper usage of
crtc_state->pipe_src is causing following warnings:
<4> [7771.978166] xe 0000:00:02.0: [drm] drm_WARN_ON_ONCE(su_lines % vdsc_cfg->slice_height)
after WARN_ON_ONCE was added by commit:
"drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters"
These warnings are seen when DSC and pipe scaling are enabled
simultaneously. This is because on full frame update SU area is improperly
set as pipe_src which is not aligned with DSC slice height.
Fix these by creating local rectangle using
crtc_state->hw.adjusted_mode.crtc_hdisplay and
crtc_state->hw.adjusted_mode.crtc_vdisplay. Use this local rectangle as
borders for SU area.
Fixes: d6774b8c3c58 ("drm/i915: Ensure damage clip area is within pipe area")
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260327114553.195285-1-jouni.hogander@intel.com
(cherry picked from commit da0cdc1c329dd2ff09c41fbbe9fbd9c92c5d2c6e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Borislav Petkov (AMD) <bp@alien8.de>
Date: Tue Mar 31 14:16:23 2026 +0200
EDAC/mc: Fix error path ordering in edac_mc_alloc()
commit 51520e03e70d6c73e33ee7cbe0319767d05764fe upstream.
When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path
will call put_device() which will end up calling the device's release
function.
However, the init ordering is wrong such that device_initialize() happens
*after* the failed allocation and thus the device itself and the release
function pointer are not initialized yet when they're called:
MCE: In-kernel MCE decoding enabled.
------------[ cut here ]------------
kobject: '(null)': is not initialized, yet kobject_put() is being called.
WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd
CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full)
RIP: 0010:kobject_put
Call Trace:
<TASK>
edac_mc_alloc+0xbe/0xe0 [edac_core]
amd64_edac_init+0x7a4/0xff0 [amd64_edac]
? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac]
do_one_initcall
...
Reorder the calling sequence so that the device is initialized and thus the
release function pointer is properly set before it can be used.
This was found by Claude while reviewing another EDAC patch.
Fixes: 0bbb265f7089 ("EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc()")
Reported-by: Claude Code:claude-opus-4.5
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20260331121623.4871-1-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Thu Mar 19 14:13:34 2026 -0700
idpf: improve locking around idpf_vc_xn_push_free()
commit d086fae65006368618104ba4c57779440eab2217 upstream.
Protect the set_bit() operation for the free_xn bitmask in
idpf_vc_xn_push_free(), to make the locking consistent with rest of the
code and avoid potential races in that logic.
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org
Reported-by: Ray Zhang <sgzhang@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Thu Mar 19 14:13:35 2026 -0700
idpf: set the payload size before calling the async handler
commit 8e2a2420e267a515f6db56a6e9570b5cacd92919 upstream.
Set the payload size before forwarding the reply to the async handler.
Without this, xn->reply_sz will be 0 and idpf_mac_filter_async_handler()
will never get past the size check.
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Li Li <boolli@google.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Date: Tue Apr 7 12:50:31 2026 +0500
Input: uinput - fix circular locking dependency with ff-core
commit 4cda78d6f8bf2b700529f2fbccb994c3e826d7c2 upstream.
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)
Fixes: ff462551235d ("Input: uinput - switch to the new FF interface")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CABXGCsMoxag+kEwHhb7KqhuyxfmGGd0P=tHZyb1uKE0pLr8Hkg@mail.gmail.com/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/20260407075031.38351-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Tue Apr 7 22:16:27 2026 -0700
Input: uinput - take event lock when submitting FF request "event"
commit ff14dafde15c11403fac61367a34fea08926e9ee upstream.
To avoid racing with FF playback events and corrupting device's event
queue take event_lock spinlock when calling uinput_dev_event() when
submitting a FF upload or erase "event".
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/adXkf6MWzlB8LA_s@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Biggers <ebiggers@kernel.org>
Date: Wed Mar 25 20:29:20 2026 -0700
lib/crypto: chacha: Zeroize permuted_state before it leaves scope
commit e5046823f8fa3677341b541a25af2fcb99a5b1e0 upstream.
Since the ChaCha permutation is invertible, the local variable
'permuted_state' is sufficient to compute the original 'state', and thus
the key, even after the permutation has been done.
While the kernel is quite inconsistent about zeroizing secrets on the
stack (and some prominent userspace crypto libraries don't bother at all
since it's not guaranteed to work anyway), the kernel does try to do it
as a best practice, especially in cases involving the RNG.
Thus, explicitly zeroize 'permuted_state' before it goes out of scope.
Fixes: c08d0e647305 ("crypto: chacha20 - Add a generic ChaCha20 stream cipher implementation")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260326032920.39408-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Sat Apr 18 10:41:59 2026 +0200
Linux 6.12.82
Link: https://lore.kernel.org/r/20260413155728.181580293@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Dileep Malepu <dileep.debian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tiezhu Yang <yangtiezhu@loongson.cn>
Date: Mon Apr 13 10:36:47 2026 +0800
LoongArch: Handle percpu handler address for ORC unwinder
[ Upstream commit 055c7e75190e0be43037bd663a3f6aced194416e ]
After commit 4cd641a79e69 ("LoongArch: Remove unnecessary checks for ORC
unwinder"), the system can not boot normally under some configs (such as
enable KASAN), there are many error messages "cannot find unwind pc".
The kernel boots normally with the defconfig, so no problem found out at
the first time. Here is one way to reproduce:
cd linux
make mrproper defconfig -j"$(nproc)"
scripts/config -e KASAN
make olddefconfig all -j"$(nproc)"
sudo make modules_install
sudo make install
sudo reboot
The address that can not unwind is not a valid kernel address which is
between "pcpu_handlers[cpu]" and "pcpu_handlers[cpu] + vec_sz" due to
the code of eentry was copied to the new area of pcpu_handlers[cpu] in
setup_tlb_handler(), handle this special case to get the valid address
to unwind normally.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tiezhu Yang <yangtiezhu@loongson.cn>
Date: Mon Apr 13 10:36:27 2026 +0800
LoongArch: Remove unnecessary checks for ORC unwinder
[ Upstream commit 4cd641a79e69270a062777f64a0dd330abb9044a ]
According to the following function definitions, __kernel_text_address()
already checks __module_text_address(), so it should remove the check of
__module_text_address() in bt_address() at least.
int __kernel_text_address(unsigned long addr)
{
if (kernel_text_address(addr))
return 1;
...
return 0;
}
int kernel_text_address(unsigned long addr)
{
bool no_rcu;
int ret = 1;
...
if (is_module_text_address(addr))
goto out;
...
return ret;
}
bool is_module_text_address(unsigned long addr)
{
guard(rcu)();
return __module_text_address(addr) != NULL;
}
Furthermore, there are two checks of __kernel_text_address(), one is in
bt_address() and the other is after calling bt_address(), it looks like
redundant.
Handle the exception address first and then use __kernel_text_address()
to validate the calculated address for exception or the normal address
in bt_address(), then it can remove the check of __kernel_text_address()
after calling bt_address().
Just remove unnecessary checks, no functional changes intended.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Fri Apr 10 01:50:55 2026 +0100
MIPS: Always record SEGBITS in cpu_data.vmbits
commit 8374c2cb83b95b3c92f129fd56527225c20a058c upstream.
With a 32-bit kernel running on 64-bit MIPS hardware the hardcoded value
of `cpu_vmbits' only records the size of compatibility useg and does not
reflect the size of native xuseg or the complete range of values allowed
in the VPN2 field of TLB entries.
An upcoming change will need the actual VPN2 value range permitted even
in 32-bit kernel configurations, so always include the `vmbits' member
in `struct cpuinfo_mips' and probe for SEGBITS when running on 64-bit
hardware and resorting to the currently hardcoded value of 31 on 32-bit
processors. No functional change for users of `cpu_vmbits'.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Fri Apr 10 01:50:57 2026 +0100
MIPS: mm: Rewrite TLB uniquification for the hidden bit feature
commit 540760b77b8fc49d39d1b2b76196e5ec57711a32 upstream.
Before the introduction of the EHINV feature, which lets software mark
TLB entries invalid, certain older implementations of the MIPS ISA were
equipped with an analogous bit, as a vendor extension, which however is
hidden from software and only ever set at reset, and then any software
write clears it, making the intended TLB entry valid.
This feature makes it unsafe to read a TLB entry with TLBR, modify the
page mask, and write the entry back with TLBWI, because this operation
will implicitly clear the hidden bit and this may create a duplicate
entry, as with the presence of the hidden bit there is no guarantee all
the entries across the TLB are unique each.
Usually the firmware has already uniquified TLB entries before handing
control over, in which case we only need to guarantee at bootstrap no
clash will happen with the VPN2 values chosen in local_flush_tlb_all().
However with systems such as Mikrotik RB532 we get handed the TLB as at
reset, with the hidden bit set across the entries and possibly duplicate
entries present. This then causes a machine check exception when page
sizes are reset in r4k_tlb_uniquify() and prevents the system from
booting.
Rewrite the algorithm used in r4k_tlb_uniquify() then such as to avoid
the reuse of ASID/VPN values across the TLB. Get rid of global entries
first as they may be blocking the entire address space, e.g. 16 256MiB
pages will exhaust the whole address space of a 32-bit CPU and a single
big page can exhaust the 32-bit compatibility space on a 64-bit CPU.
Details of the algorithm chosen are given across the code itself.
Fixes: 9f048fa48740 ("MIPS: mm: Prevent a TLB shutdown on initial uniquification")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Fri Apr 10 01:50:56 2026 +0100
MIPS: mm: Suppress TLB uniquification on EHINV hardware
commit 74283cfe216392c7b776ebf6045b5b15ed9dffcd upstream.
Hardware that supports the EHINV feature, mandatory for R6 ISA and FTLB
implementation, lets software mark TLB entries invalid, which eliminates
the need to ensure no duplicate matching entries are ever created. This
feature is already used by local_flush_tlb_all(), via the UNIQUE_ENTRYHI
macro, making the preceding call to r4k_tlb_uniquify() superfluous.
The next change will also modify uniquification code such that it'll
become incompatible with the FTLB and MMID features, as well as MIPSr6
CPUs that do not implement 4KiB pages.
Therefore prevent r4k_tlb_uniquify() from being used on EHINV hardware,
as denoted by `cpu_has_tlbinv'.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xingjing Deng <micro6947@gmail.com>
Date: Wed Apr 8 10:21:44 2026 -0400
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
[ Upstream commit 6a502776f4a4f80fb839b22f12aeaf0267fca344 ]
In the SDSP probe path, qcom_scm_assign_mem() is used to assign the
reserved memory to the configured VMIDs, but its return value was not checked.
Fail the probe if the SCM call fails to avoid continuing with an
unexpected/incorrect memory permission configuration.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed.
Fixes: c3c0363bc72d4 ("misc: fastrpc: support complete DMA pool access to the DSP")
Cc: stable@vger.kernel.org # 6.11-rc1
Signed-off-by: Xingjing Deng <xjdeng@buaa.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260131065539.2124047-1-xjdeng@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ adapted qcom_scm_assign_mem() error check to use fdev_error label and rmem-based memory API ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baolin Wang <baolin.wang@linux.alibaba.com>
Date: Tue Mar 17 17:29:55 2026 +0800
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
commit f58df566524ebcdfa394329c64f47e3c9257516e upstream.
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid 'nr_pages' calculation overflow. After this patch, the
crash issue is gone.
Link: https://lkml.kernel.org/r/1cf1ac59018fc647a87b0dad605d4056a71c14e4.1773739704.git.baolin.wang@linux.alibaba.com
Fixes: 743a2753a02e ("filemap: cap PTE range to be created to allowed zero fill in folio_map_range()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reported-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Tested-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan@kernel.org>
Date: Fri Mar 27 11:52:05 2026 +0100
mmc: vub300: fix NULL-deref on disconnect
commit dff34ef879c5e73298443956a8b391311ba78d57 upstream.
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiayuan Chen <jiayuan.chen@linux.dev>
Date: Mon Apr 6 11:15:10 2026 +0800
mptcp: fix slab-use-after-free in __inet_lookup_established
commit 9b55b253907e7431210483519c5ad711a37dafa1 upstream.
The ehash table lookups are lockless and rely on
SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability
during RCU read-side critical sections. Both tcp_prot and
tcpv6_prot have their slab caches created with this flag
via proto_register().
However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into
tcpv6_prot_override during inet_init() (fs_initcall, level 5),
before inet6_init() (module_init/device_initcall, level 6) has
called proto_register(&tcpv6_prot). At that point,
tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab
remains NULL permanently.
This causes MPTCP v6 subflow child sockets to be allocated via
kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab
cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so
when these sockets are freed without SOCK_RCU_FREE (which is
cleared for child sockets by design), the memory can be
immediately reused. Concurrent ehash lookups under
rcu_read_lock can then access freed memory, triggering a
slab-use-after-free in __inet_lookup_established.
Fix this by splitting the IPv6-specific initialization out of
mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called
from mptcp_proto_v6_init() before protocol registration. This
ensures tcpv6_prot_override.slab correctly inherits the
SLAB_TYPESAFE_BY_RCU slab cache.
Fixes: b19bc2945b40 ("mptcp: implement delegated actions")
Cc: stable@vger.kernel.org
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260406031512.189159-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Guralnik <michaelgur@nvidia.com>
Date: Fri Apr 3 12:17:56 2026 +0300
net/mlx5: Update the list of the PCI supported devices
commit a9d4f4f6e65e0bf9bbddedecc84d67249991979c upstream.
Add the upcoming ConnectX-10 NVLink-C2C device ID to the table of
supported PCI device IDs.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260403091756.139583-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Date: Fri Apr 3 09:36:17 2026 +0800
net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption
commit a9b8b18364fffce4c451e6f6fd218fa4ab646705 upstream.
The -EBUSY handling in tls_do_encryption(), introduced by commit
859054147318 ("net: tls: handle backlogging of crypto requests"), has
a use-after-free due to double cleanup of encrypt_pending and the
scatterlist entry.
When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to
the cryptd backlog and the async callback tls_encrypt_done() will be
invoked upon completion. That callback unconditionally restores the
scatterlist entry (sge->offset, sge->length) and decrements
ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an
error, the synchronous error path in tls_do_encryption() performs the
same cleanup again, double-decrementing encrypt_pending and
double-restoring the scatterlist.
The double-decrement corrupts the encrypt_pending sentinel (initialized
to 1), making tls_encrypt_async_wait() permanently skip the wait for
pending async callbacks. A subsequent sendmsg can then free the
tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still
pending, resulting in a use-after-free when the callback fires on the
freed record.
Fix this by skipping the synchronous cleanup when the -EBUSY async
wait returns an error, since the callback has already handled
encrypt_pending and sge restoration.
Fixes: 859054147318 ("net: tls: handle backlogging of crypto requests")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260403013617.2838875-1-ramdhan@starlabs.sg
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Carlier <devnexen@gmail.com>
Date: Wed Apr 1 22:12:18 2026 +0100
net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()
commit 6dede3967619b5944003227a5d09fdc21ed57d10 upstream.
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb.
Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260401211218.279185-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Apr 13 17:40:12 2026 +0800
net: annotate data-races around sk->sk_{data_ready,write_space}
[ Upstream commit 2ef2b20cf4e04ac8a6ba68493f8780776ff84300 ]
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: syzbot+87f770387a9e5dc6b79b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/699ee9fc.050a0220.1cd54b.0009.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260225131547.1085509-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Leon Chen <leonchen.oss@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Carlier <devnexen@gmail.com>
Date: Sun Apr 5 06:52:40 2026 +0100
net: lan966x: fix page pool leak in error paths
commit 076344a6ad9d1308faaed1402fdcfdda68b604ab upstream.
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths.
Fixes: 11871aba1974 ("net: lan96x: Use page_pool API")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-3-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Carlier <devnexen@gmail.com>
Date: Sun Apr 5 06:52:39 2026 +0100
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
commit 3fd0da4fd8851a7e62d009b7db6c4a05b092bc19 upstream.
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure.
Fixes: 11871aba1974 ("net: lan96x: Use page_pool API")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-2-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Carlier <devnexen@gmail.com>
Date: Sun Apr 5 06:52:41 2026 +0100
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
commit 59c3d55a946cacdb4181600723c20ac4f4c20c84 upstream.
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path.
Fixes: 89ba464fcf54 ("net: lan966x: refactor buffer reload function")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-4-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pengpeng Hou <pengpeng@iscas.ac.cn>
Date: Thu Apr 2 15:12:07 2026 +0800
net: qualcomm: qca_uart: report the consumed byte on RX skb allocation failure
commit b76254c55dc8f23edc089027dd3f8792554c69fb upstream.
qca_tty_receive() consumes each input byte before checking whether a
completed frame needs a fresh receive skb. When the current byte completes
a frame, the driver delivers that frame and then allocates a new skb for
the next one.
If that allocation fails, the current code returns i even though data[i]
has already been consumed and may already have completed the delivered
frame. Since serdev interprets the return value as the number of accepted
bytes, this under-reports progress by one byte and can replay the final
byte of the completed frame into a fresh parser state on the next call.
Return i + 1 in that failure path so the accepted-byte count matches the
actual receive-state progress.
Fixes: dfc768fbe618 ("net: qualcomm: add QCA7000 UART driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260402071207.4036-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Mar 30 11:14:13 2026 +0200
net: rfkill: prevent unlimited numbers of rfkill events from being created
commit ea245d78dec594372e27d8c79616baf49e98a4a1 upstream.
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this.
Cc: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026033013-disfigure-scroll-e25e@gregkh
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiayuan Chen <jiayuan.chen@linux.dev>
Date: Fri Apr 3 09:45:12 2026 +0800
net: skb: fix cross-cache free of KFENCE-allocated skb head
commit 0f42e3f4fe2a58394e37241d02d9ca6ab7b7d516 upstream.
SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2
value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc
bucket sizes. This ensures that skb_kfree_head() can reliably use
skb_end_offset to distinguish skb heads allocated from
skb_small_head_cache vs. generic kmalloc caches.
However, when KFENCE is enabled, kfence_ksize() returns the exact
requested allocation size instead of the slab bucket size. If a caller
(e.g. bpf_test_init) allocates skb head data via kzalloc() and the
requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then
slab_build_skb() -> ksize() returns that exact value. After subtracting
skb_shared_info overhead, skb_end_offset ends up matching
SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free
the object to skb_small_head_cache instead of back to the original
kmalloc cache, resulting in a slab cross-cache free:
kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected
skbuff_small_head but got kmalloc-1k
Fix this by always calling kfree(head) in skb_kfree_head(). This keeps
the free path generic and avoids allocator-specific misclassification
for KFENCE objects.
Fixes: bf9f1baa279f ("net: add dedicated kmem_cache for typical/small skb->head")
Reported-by: Antonius <antonius@bluedragonsec.com>
Closes: https://lore.kernel.org/netdev/CAK8a0jxC5L5N7hq-DT2_NhUyjBxrPocoiDazzsBk4TGgT1r4-A@mail.gmail.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260403014517.142550-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tyllis Xu <livelycarpet87@gmail.com>
Date: Tue Mar 31 23:47:07 2026 -0500
net: stmmac: fix integer underflow in chain mode
commit 51f4e090b9f87b40c21b6daadb5c06e6c0a07b67 upstream.
The jumbo_frm() chain-mode implementation unconditionally computes
len = nopaged_len - bmax;
where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is
BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit()
decides to invoke jumbo_frm() based on skb->len (total length including
page fragments):
is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
When a packet has a small linear portion (nopaged_len <= bmax) but a
large total length due to page fragments (skb->len > bmax), the
subtraction wraps as an unsigned integer, producing a huge len value
(~0xFFFFxxxx). This causes the while (len != 0) loop to execute
hundreds of thousands of iterations, passing skb->data + bmax * i
pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less
SoCs (the typical deployment for stmmac), this maps arbitrary kernel
memory to the DMA engine, constituting a kernel memory disclosure and
potential memory corruption from hardware.
Fix this by introducing a buf_len local variable clamped to
min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then
always safe: it is zero when the linear portion fits within a single
descriptor, causing the while (len != 0) loop to be skipped naturally,
and the fragment loop in stmmac_xmit() handles page fragments afterward.
Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)")
Cc: stable@vger.kernel.org
Signed-off-by: Tyllis Xu <LivelyCarpet87@gmail.com>
Link: https://patch.msgid.link/20260401044708.1386919-1-LivelyCarpet87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tuan Do <tuan@calif.io>
Date: Fri Apr 3 00:33:17 2026 -0700
netfilter: nft_ct: fix use-after-free in timeout object destroy
commit f8dca15a1b190787bbd03285304b569631160eda upstream.
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Fixes: 7e0b2b57f01d ("netfilter: nft_ct: add ct timeout support")
Cc: stable@vger.kernel.org
Signed-off-by: Tuan Do <tuan@calif.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Fri Apr 10 16:24:03 2026 +0800
nfc: nci: complete pending data exchange on device close
[ Upstream commit 66083581945bd5b8e99fe49b5aeb83d03f62d053 ]
In nci_close_device(), complete any pending data exchange before
closing. The data exchange callback (e.g.
rawsock_data_exchange_complete) holds a socket reference.
NIPA occasionally hits this leak:
unreferenced object 0xff1100000f435000 (size 2048):
comm "nci_dev", pid 3954, jiffies 4295441245
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc ec2b3c5):
__kmalloc_noprof+0x4db/0x730
sk_prot_alloc.isra.0+0xe4/0x1d0
sk_alloc+0x36/0x760
rawsock_create+0xd1/0x540
nfc_sock_create+0x11f/0x280
__sock_create+0x22d/0x630
__sys_socket+0x115/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0x117/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 38f04c6b1b68 ("NFC: protect nci_data_exchange transactions")
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260303162346.2071888-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pengpeng Hou <pengpeng@iscas.ac.cn>
Date: Sun Apr 5 08:40:00 2026 +0800
nfc: pn533: allocate rx skb before consuming bytes
commit c71ba669b570c7b3f86ec875be222ea11dacb352 upstream.
pn532_receive_buf() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already hand
a complete frame to pn533_recv_frame() before allocating a fresh receive
buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted.
Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260405094003.3-pn533-v2-pengpeng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Date: Wed Mar 25 12:29:09 2026 -0700
platform/x86/intel-uncore-freq: Handle autonomous UFS status bit
commit 4ab604b3f3aa8dcccc7505f5d310016682a99d5f upstream.
When the AUTONOMOUS_UFS_DISABLED bit is set in the header, the ELC
(Efficiency Latency Control) feature is non-functional. Hence, return
error for read or write to ELC attributes.
Fixes: bb516dc79c4a ("platform/x86/intel-uncore-freq: Add support for efficiency latency control")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260325192909.3417322-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jacky Bai <ping.bai@nxp.com>
Date: Fri Mar 20 16:43:46 2026 +0800
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
commit e91d5f94acf68618ea3ad9c92ac28614e791ae7d upstream.
Keep the NOC_HDCP clock always enabled to fix the potential hang
caused by the NoC ADB400 port power down handshake.
Fixes: 77b0ddb42add ("soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Date: Sat Feb 21 19:15:18 2026 +0100
Revert "arm64: dts: imx8mq-librem5: Set the DVS voltages lower"
commit 4cd46ea0eb4504f7f4fea92cb4601c5c9a3e545e upstream.
This reverts commit c24a9b698fb02cd0723fa8375abab07f94b97b10.
It's been found that there's a significant per-unit variance in accepted
supply voltages and the current set still makes some units unstable.
Revert back to nominal values.
Cc: stable@vger.kernel.org
Fixes: c24a9b698fb0 ("arm64: dts: imx8mq-librem5: Set the DVS voltages lower")
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Sun Apr 12 08:54:51 2026 -0400
Revert "mptcp: add needs_id for netlink appending addr"
[ Upstream commit 8e2760eaab778494fc1fa257031e0e1799647f46 ]
This commit was originally adding the ability to add MPTCP endpoints
with ID 0 by accident. The in-kernel PM, handling MPTCP endpoints at the
net namespace level, is not supposed to handle endpoints with such ID,
because this ID 0 is reserved to the initial subflow, as mentioned in
the MPTCPv1 protocol [1], a per-connection setting.
Note that 'ip mptcp endpoint add id 0' stops early with an error, but
other tools might still request the in-kernel PM to create MPTCP
endpoints with this restricted ID 0.
In other words, it was wrong to call the mptcp_pm_has_addr_attr_id
helper to check whether the address ID attribute is set: if it was set
to 0, a new MPTCP endpoint would be created with ID 0, which is not
expected, and might cause various issues later.
Fixes: 584f38942626 ("mptcp: add needs_id for netlink appending addr")
Cc: stable@vger.kernel.org
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.2-9 [1]
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260407-net-mptcp-revert-pm-needs-id-v2-1-7a25cbc324f8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied changes to net/mptcp/pm_netlink.c instead of renamed net/mptcp/pm_kernel.c ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Howells <dhowells@redhat.com>
Date: Wed Apr 8 13:12:31 2026 +0100
rxrpc: Fix anonymous key handling
commit 6a59d84b4fc2f27f7b40e348506cc686712e260b upstream.
In rxrpc_new_client_call_for_sendmsg(), a key with no payload is meant to
be substituted for a NULL key pointer, but the variable this is done with
is subsequently not used.
Fix this by using "key" rather than "rx->key" when filling in the
connection parameters.
Note that this only affects direct use of AF_RXRPC; the kAFS filesystem
doesn't use sendmsg() directly and so bypasses the issue. Further,
AF_RXRPC passes a NULL key in if no key is set, so using an anonymous key
in that manner works. Since this hasn't been noticed to this point, it
might be better just to remove the "key" variable and the code that sets it
- and, arguably, rxrpc_init_client_call_security() would be a better place
to handle it.
Fixes: 19ffa01c9c45 ("rxrpc: Use structs to hold connection params and protocol info")
Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Howells <dhowells@redhat.com>
Date: Wed Apr 8 13:12:32 2026 +0100
rxrpc: Fix call removal to use RCU safe deletion
commit 146d4ab94cf129ee06cd467cb5c71368a6b5bad6 upstream.
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs.
Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Anderson Nascimento <anderson@allelesecurity.com>
Date: Wed Apr 8 13:12:36 2026 +0100
rxrpc: Fix key reference count leak from call->key
commit d666540d217e8d420544ebdfbadeedd623562733 upstream.
When creating a client call in rxrpc_alloc_client_call(), the code obtains
a reference to the key. This is never cleaned up and gets leaked when the
call is destroyed.
Fix this by freeing call->key in rxrpc_destroy_call().
Before the patch, it shows the key reference counter elevated:
$ cat /proc/keys | grep afs@54321
1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka
$
After the patch, the invalidated key is removed when the code exits:
$ cat /proc/keys | grep afs@54321
$
Fixes: f3441d4125fc ("rxrpc: Copy client call parameters into rxrpc_call earlier")
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-9-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Howells <dhowells@redhat.com>
Date: Wed Apr 8 13:12:43 2026 +0100
rxrpc: Fix key/keyring checks in setsockopt(RXRPC_SECURITY_KEY/KEYRING)
commit 2afd86ccbb2082a3c4258aea8c07e5bb6267bc2f upstream.
An AF_RXRPC socket can be both client and server at the same time. When
sending new calls (ie. it's acting as a client), it uses rx->key to set the
security, and when accepting incoming calls (ie. it's acting as a server),
it uses rx->securities.
setsockopt(RXRPC_SECURITY_KEY) sets rx->key to point to an rxrpc-type key
and setsockopt(RXRPC_SECURITY_KEYRING) sets rx->securities to point to a
keyring of rxrpc_s-type keys.
Now, it should be possible to use both rx->key and rx->securities on the
same socket - but for userspace AF_RXRPC sockets rxrpc_setsockopt()
prevents that.
Fix this by:
(1) Remove the incorrect check rxrpc_setsockopt(RXRPC_SECURITY_KEYRING)
makes on rx->key.
(2) Move the check that rxrpc_setsockopt(RXRPC_SECURITY_KEY) makes on
rx->key down into rxrpc_request_key().
(3) Remove rxrpc_request_key()'s check on rx->securities.
This (in combination with a previous patch) pushes the checks down into the
functions that set those pointers and removes the cross-checks that prevent
both key and keyring being set.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Closes: https://sashiko.dev/#/patchset/20260401105614.1696001-10-dhowells@redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Anderson Nascimento <anderson@allelesecurity.com>
cc: Luxiao Xu <rakukuip@gmail.com>
cc: Yuan Tan <yuantan098@gmail.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-16-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Howells <dhowells@redhat.com>
Date: Wed Apr 8 13:12:44 2026 +0100
rxrpc: Fix missing error checks for rxkad encryption/decryption failure
commit f93af41b9f5f798823d0d0fb8765c2a936d76270 upstream.
Add error checking for failure of crypto_skcipher_en/decrypt() to various
rxkad function as the crypto functions can fail with ENOMEM at least.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Closes: https://sashiko.dev/#/patchset/20260401105614.1696001-10-dhowells@redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-17-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luxiao Xu <rakukuip@gmail.com>
Date: Wed Apr 8 13:12:42 2026 +0100
rxrpc: fix reference count leak in rxrpc_server_keyring()
commit f125846ee79fcae537a964ce66494e96fa54a6de upstream.
This patch fixes a reference count leak in rxrpc_server_keyring()
by checking if rx->securities is already set.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-15-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Douya Le <ldy3087146292@gmail.com>
Date: Wed Apr 8 13:12:38 2026 +0100
rxrpc: Only put the call ref if one was acquired
commit 6331f1b24a3e85465f6454e003a3e6c22005a5c5 upstream.
rxrpc_input_packet_on_conn() can process a to-client packet after the
current client call on the channel has already been torn down. In that
case chan->call is NULL, rxrpc_try_get_call() returns NULL and there is
no reference to drop.
The client-side implicit-end error path does not account for that and
unconditionally calls rxrpc_put_call(). This turns a protocol error
path into a kernel crash instead of rejecting the packet.
Only drop the call reference if one was actually acquired. Keep the
existing protocol error handling unchanged.
Fixes: 5e6ef4f1017c ("rxrpc: Make the I/O thread take over the call and local processor work")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Douya Le <ldy3087146292@gmail.com>
Co-developed-by: Yuan Tan <tanyuan98@gmail.com>
Signed-off-by: Yuan Tan <tanyuan98@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ao Zhou <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-11-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yuqi Xu <xuyuqiabc@gmail.com>
Date: Wed Apr 8 13:12:39 2026 +0100
rxrpc: reject undecryptable rxkad response tickets
commit fe4447cd95623b1cfacc15f280aab73a6d7340b2 upstream.
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-12-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrea Righi <arighi@nvidia.com>
Date: Wed Apr 8 09:44:09 2026 -0400
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
[ Upstream commit 7e0ffb72de8aa3b25989c2d980e81b829c577010 ]
@p->scx.ddsp_dsq_id can be left set (non-SCX_DSQ_INVALID) triggering a
spurious warning in mark_direct_dispatch() when the next wakeup's
ops.select_cpu() calls scx_bpf_dsq_insert(), such as:
WARNING: kernel/sched/ext.c:1273 at scx_dsq_insert_commit+0xcd/0x140
The root cause is that ddsp_dsq_id was only cleared in dispatch_enqueue(),
which is not reached in all paths that consume or cancel a direct dispatch
verdict.
Fix it by clearing it at the right places:
- direct_dispatch(): cache the direct dispatch state in local variables
and clear it before dispatch_enqueue() on the synchronous path. For
the deferred path, the direct dispatch state must remain set until
process_ddsp_deferred_locals() consumes them.
- process_ddsp_deferred_locals(): cache the dispatch state in local
variables and clear it before calling dispatch_to_local_dsq(), which
may migrate the task to another rq.
- do_enqueue_task(): clear the dispatch state on the enqueue path
(local/global/bypass fallbacks), where the direct dispatch verdict is
ignored.
- dequeue_task_scx(): clear the dispatch state after dispatch_dequeue()
to handle both the deferred dispatch cancellation and the holding_cpu
race, covering all cases where a pending direct dispatch is
cancelled.
- scx_disable_task(): clear the direct dispatch state when
transitioning a task out of the current scheduler. Waking tasks may
have had the direct dispatch state set by the outgoing scheduler's
ops.select_cpu() and then been queued on a wake_list via
ttwu_queue_wakelist(), when SCX_OPS_ALLOW_QUEUED_WAKEUP is set. Such
tasks are not on the runqueue and are not iterated by scx_bypass(),
so their direct dispatch state won't be cleared. Without this clear,
any subsequent SCX scheduler that tries to direct dispatch the task
will trigger the WARN_ON_ONCE() in mark_direct_dispatch().
Fixes: 5b26f7b920f7 ("sched_ext: Allow SCX_DSQ_LOCAL_ON for direct dispatches")
Cc: stable@vger.kernel.org # v6.12+
Cc: Daniel Hodges <hodgesd@meta.com>
Cc: Patrick Somaru <patsomaru@meta.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ adapted function signatures and code paths ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrea Mayer <andrea.mayer@uniroma2.it>
Date: Sat Apr 4 02:44:04 2026 +0200
seg6: separate dst_cache for input and output paths in seg6 lwtunnel
commit c3812651b522fe8437ebb7063b75ddb95b571643 upstream.
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently.
Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404004405.4057-2-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oleh Konko <security@1seal.org>
Date: Thu Apr 2 09:48:57 2026 +0000
tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG
commit 48a5fe38772b6f039522469ee6131a67838221a8 upstream.
The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements
bc_ackers on every inbound group ACK, even when the same member has
already acknowledged the current broadcast round.
Because bc_ackers is a u16, a duplicate ACK received after the last
legitimate ACK wraps the counter to 65535. Once wrapped,
tipc_group_bc_cong() keeps reporting congestion and later group
broadcasts on the affected socket stay blocked until the group is
recreated.
Fix this by ignoring duplicate or stale ACKs before touching bc_acked or
bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and
prevents the underflow path.
Fixes: 2f487712b893 ("tipc: guarantee that group broadcast doesn't bypass group unicast")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/41a4833f368641218e444fdcff822039.security@1seal.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nathan Rebello <nathan.c.rebello@gmail.com>
Date: Tue Apr 7 02:39:58 2026 -0400
usb: typec: ucsi: skip connector validation before init
commit 5a1140404cbf7ba40137dfb1fb96893aa9a67d68 upstream.
Notifications can arrive before ucsi_init() has populated
ucsi->cap.num_connectors via GET_CAPABILITY. At that point
num_connectors is still 0, causing all valid connector numbers to be
incorrectly rejected as bogus.
Skip the bounds check when num_connectors is 0 (not yet initialized).
Pre-init notifications are already handled safely by the early-event
guard in ucsi_connector_change().
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: d2d8c17ac01a ("usb: typec: ucsi: validate connector number in ucsi_notify_common()")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Rebello <nathan.c.rebello@gmail.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407063958.863-1-nathan.c.rebello@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Wed Feb 18 14:07:37 2026 +0100
wifi: brcmsmac: Fix dma_free_coherent() size
commit 12cd7632757a54ce586e36040210b1a738a0fc53 upstream.
dma_alloc_consistent() may change the size to align it. The new size is
saved in alloced.
Change the free size to match the allocation size.
Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260218130741.46566-3-fourier.thomas@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan@kernel.org>
Date: Fri Mar 27 12:32:19 2026 +0100
wifi: rt2x00usb: fix devres lifetime
commit 25369b22223d1c56e42a0cd4ac9137349d5a898e upstream.
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the USB anchor lifetime so that it is released on driver unbind.
Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
Cc: stable@vger.kernel.org # 4.7
Cc: Vishal Thanki <vishalthanki@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260327113219.1313748-1-johan@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthew Brost <matthew.brost@intel.com>
Date: Tue Mar 31 18:07:39 2026 -0700
workqueue: Add pool_workqueue to pending_pwqs list when unplugging multiple inactive works
commit 703ccb63ae9f7444d6ff876d024e17f628103c69 upstream.
In unplug_oldest_pwq(), the first inactive work item on the
pool_workqueue is activated correctly. However, if multiple inactive
works exist on the same pool_workqueue, subsequent works fail to
activate because wq_node_nr_active.pending_pwqs is empty — the list
insertion is skipped when the pool_workqueue is plugged.
Fix this by checking for additional inactive works in
unplug_oldest_pwq() and updating wq_node_nr_active.pending_pwqs
accordingly.
Fixes: 4c065dbce1e8 ("workqueue: Enable unbound cpumask update on ordered workqueues")
Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Ryan Neph <ryanneph@google.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lukas Wunner <lukas@wunner.de>
Date: Tue Apr 7 12:58:18 2026 +0200
X.509: Fix out-of-bounds access when parsing extensions
commit d702c3408213bb12bd570bb97204d8340d141c51 upstream.
Leo reports an out-of-bounds access when parsing a certificate with
empty Basic Constraints or Key Usage extension because the first byte of
the extension is read before checking its length. Fix it.
The bug can be triggered by an unprivileged user by submitting a
specially crafted certificate to the kernel through the keyrings(7) API.
Leo has demonstrated this with a proof-of-concept program responsibly
disclosed off-list.
Fixes: 30eae2b037af ("KEYS: X.509: Parse Basic Constraints for CA")
Fixes: 567671281a75 ("KEYS: X.509: Parse Key Usage")
Reported-by: Leo Lin <leo@depthfirst.com> # off-list
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ignat Korchagin <ignat@linux.win>
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Borislav Petkov (AMD) <bp@alien8.de>
Date: Tue Apr 7 11:40:03 2026 +0200
x86/CPU: Fix FPDSS on Zen1
commit e55d98e7756135f32150b9b8f75d580d0d4b2dd3 upstream.
Zen1's hardware divider can leave, under certain circumstances, partial
results from previous operations. Those results can be leaked by
another, attacker thread.
Fix that with a chicken bit.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yasuaki Torimaru <yasuakitorimaru@gmail.com>
Date: Thu Mar 26 14:58:00 2026 +0900
xfrm: clear trailing padding in build_polexpire()
commit 71a98248c63c535eaa4d4c22f099b68d902006d0 upstream.
build_expire() clears the trailing padding bytes of struct
xfrm_user_expire after setting the hard field via memset_after(),
but the analogous function build_polexpire() does not do this for
struct xfrm_user_polexpire.
The padding bytes after the __u8 hard field are left
uninitialized from the heap allocation, and are then sent to
userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners,
leaking kernel heap memory contents.
Add the missing memset_after() call, matching build_expire().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Yasuaki Torimaru <yasuakitorimaru@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Apr 6 17:34:22 2026 +0200
xfrm_user: fix info leak in build_report()
commit d10119968d0e1f2b669604baf2a8b5fdb72fa6b4 upstream.
struct xfrm_user_report is a __u8 proto field followed by a struct
xfrm_selector which means there is three "empty" bytes of padding, but
the padding is never zeroed before copying to userspace. Fix that up by
zeroing the structure before setting individual member variables.
Cc: stable <stable@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>