Author: Takashi Iwai <tiwai@suse.de>
Date: Thu Aug 6 12:04:31 2026 +0200
ALSA: dummy: Check card index validity at probe
commit 02442d5fe8ee365a084b055d4fa81a0c1abfc3fd upstream.
snd_dummy_probe() blindly trusts that the given devptr->id value is
within the proper card index range. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Reported-by: syzbot+2fb5d1f7cc4c1f132bcc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/6a73bd4d.01d0871a.3a0d52.0005.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260806100433.1287393-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dawid Wróbel <me@dawidwrobel.com>
Date: Mon Aug 24 18:06:51 2026 -0400
ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses
[ Upstream commit 1ba381759e45d5d0442452cfa5c42e836191a568 ]
The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but
tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their
value through ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but tx-macro was missed.
On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value
sanity check catches the 4 bytes written past the enumerated item
and every read of these controls fails with -EINVAL:
snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Assisted-by: Claude:claude-fable-5
Cc: stable@vger.kernel.org
Signed-off-by: Dawid Wróbel <me@dawidwrobel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730-worktree-lpass-tx-macro-enum-fix-v2-1-6d091c736116@dawidwrobel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[ kept `snd_soc_kcontrol_component()` context line instead of upstream's renamed `snd_kcontrol_chip()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chengfeng Ye <nicoyip.dev@gmail.com>
Date: Thu Jul 30 16:32:02 2026 +0800
Bluetooth: hci_event: fix LE list UAF on reset
commit 33af47e847fe4a28b109673affb5874015d54f5a upstream.
hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.
This permits the reset completion and a debugfs read to interleave as
follows:
hci_rx_work debugfs reader
----------- --------------
lock hdev->lock
fetch current entry
list_del(entry)
kfree(entry)
read entry fields
The reader then dereferences a freed list entry and may follow its stale
next pointer.
KASAN reported:
BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180
Read of size 1 at addr ffff8881015dab16 by task poc/95
Call Trace:
white_list_show+0x15f/0x180
seq_read_iter+0x3ff/0x1190
seq_read+0x267/0x3d0
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
Allocated by task 91:
hci_bdaddr_list_add+0x1a6/0x3a0
hci_cc_le_add_to_accept_list+0xab/0x140
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Freed by task 90:
kfree+0x131/0x3c0
hci_bdaddr_list_clear+0xd8/0x160
hci_cc_reset+0x28a/0x370
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Take hdev->lock around both list clears. This matches the existing
mutation and traversal locking convention.
Fixes: a4d5504d5c39 ("Bluetooth: Clear LE white list when resetting controller")
Fixes: cfdb0c2d095a ("Bluetooth: Store Resolv list size")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ali Ahmet Memis <ali@iusegentoo.com>
Date: Fri Aug 7 02:03:44 2026 +0000
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
commit 43a556b2fd43f2df6dded59c2e26560a27874c24 upstream.
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as
"called under rfcomm_lock()". This call site is the only one that skips
it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against
teardown, since __rfcomm_dlc_close() returns early when it wins the
test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and
BT_CONNECT2. With the state already BT_CLOSED that switch does not
match, the bit is never consulted, and __rfcomm_dlc_close() falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving
RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the
test_and_clear and dereferences a NULL session. No timing window is
needed: once the DISC has been processed, the dereference is
unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and
rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and
re-checks the session, around a __rfcomm_dlc_accept() that the two
in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated
over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the
RFCOMM PSM, starts a session, opens a dlc on a channel bound with
BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on
the accepted socket then hits:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rfcomm_dlc_accept+0x54/0x350
Call Trace:
rfcomm_sock_recvmsg+0x1cd/0x230
sock_recvmsg+0x166/0x1c0
__sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the
same run completes with recv() returning 0 and no report, and lockdep
stays quiet, confirming rfcomm_mutex is still taken before lock_sock on
this path as it is on the thread side.
Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Tue Aug 25 14:27:15 2026 +0200
can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
commit 050f010f920da17c1044a4f174766ad553e770b6 upstream.
This patch is a follow-up to commit cf070fe33bfb ("can: isotp: serialize
TX state transitions under so->rx_lock") which addresses following
sashiko-bot findings:
- isotp_sendmsg(): drain so->txfrtimer first so a stale callback can't
re-arm echotimer after the claim
- isotp_release(): wake so->wait after forcing ISOTP_SHUTDOWN so a
sleeping sendmsg() claim isn't stranded
- isotp_sendmsg(): have both wait_event_interruptible() calls in
isotp_sendmsg() also wake on ISOTP_SHUTDOWN and do not return claim to
IDLE to avoid corrupting a concurrent isotp_release() process.
- isotp_sendmsg(): handle potential claim of a new transfer when
the wait_event_interruptible() call returns in CAN_ISOTP_WAIT_TX_DONE
mode. Don't touch timers and states of the new transfer if a new thread
incremented so->tx_gen before getting the lock at err_event_drop.
- isotp_sendmsg(): handle a stuck can_send() and omit timer and state
changes if a new transfer was claimed. wait_tx_done() returns the error
recorded in so->tx_result[], tagged with the caller's own generation.
- isotp_tx_timeout(): on a claimed timeout, record the ECOMM error for
the timed-out transfer's own generation in so->tx_result[]; sk->sk_err
is raised unconditionally, same as every other error path here.
- isotp_tx_gen_done()/isotp_tx_timeout(): always read tx.state (acquire)
before tx_gen - the reverse order let a weakly ordered CPU pair a fresh
tx.state with a stale tx_gen/tx_result slot.
- isotp_sendmsg(): wait_tx_done: drain sk_err via sock_error() once we
have read the result from so->tx_result[], so an already-reported error
doesn't stay latched for a later poll()/SO_ERROR.
Also align the remaining lock-free so->tx.state/rx.state/cfecho accesses
and use skb->hash as unique loopback echo frame indicator.
Fixes: cf070fe33bfb ("can: isotp: serialize TX state transitions under so->rx_lock")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260724181525.43556-1-socketcan@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Tue Aug 25 14:27:14 2026 +0200
can: use skb hash instead of private variable in headroom
commit d4fb6514ff8ed6912a71294e6b66a5d59ee88007 upstream.
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Wang <kevinyang.wang@amd.com>
Date: Mon Aug 24 07:21:59 2026 -0400
drm/amdgpu: check ASPM on the dGPU host link
[ Upstream commit 2a9c5154a5650c09ad44ff5e1dff74754e15a3c6 ]
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e0d6f2876e704fff707b18c40dbd383aea4a1c9)
Cc: stable@vger.kernel.org
[ Dropped the upstream APU and `amdgpu_device_aspm_support_quirk(adev)` context lines, keeping 6.1's old-signature quirk helper untouched. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Junrui Luo <moonafterrain@outlook.com>
Date: Sun Aug 23 20:12:07 2026 -0400
drm/amdgpu: disallow multiple FENCE chunks in one submit
[ Upstream commit 931cd1d1baeae68e8eb2c23bc1f3d8934dca6241 ]
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82)
[ adapted `p->uf_bo` to the pre-drm_exec field spelling `p->uf_entry.tv.bo` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guanghui Yang <3497809730@qq.com>
Date: Wed Jul 8 12:57:19 2026 +0000
ext4: clear error before retrying inode xattr space fallback
commit 409a7f12a0933ff2c617fa814c76cef0bd1d457a upstream.
When ext4_xattr_make_inode_space() returns -ENOSPC,
ext4_expand_extra_isize_ea() can retry the expansion with
s_min_extra_isize. If that retry succeeds by finding enough ibody free
space, control jumps directly to the shift label.
The previous -ENOSPC is still stored in error in that path, so the
function can update i_extra_isize but still return -ENOSPC to the
caller. Clear error before retrying so a successful fallback expansion
returns success.
Reproduced with an ext4 image using 1 KiB blocks, project quota support,
256-byte inodes, and min_extra_isize/want_extra_isize set to 32.
FS_IOC_FSSETXATTR failures dropped from 802 to 86 after the fix.
Fixes: 69f3a3039b0d ("ext4: introduce ITAIL helper")
Cc: stable@vger.kernel.org
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/tencent_192F8A699EFD21126E02101131C9546F3C08@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthias Goergens <matthias.goergens@gmail.com>
Date: Sun Aug 2 14:59:41 2026 +0800
ext4: stop retrying saturated xattr cache entries
commit 54b6bd40898de7906acb2bccc9a96d1b8e6b4323 upstream.
ext4_xattr_block_set() retries when a cache entry selected for reuse
has a saturated reference count after taking the buffer lock. The retry
returns to the mbcache lookup without making that entry ineligible, so
it can select the same unusable entry indefinitely. A task spinning
there can hold the parent directory's i_rwsem and leave concurrent
rmdir callers blocked.
Normally a reusable entry has a reference count below
EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are
updated under the same buffer lock. A corrupted filesystem can violate
that invariant. The syzbot reproducer reports allocator and xattr
corruption before triggering this retry loop.
Check the untrusted on-disk count before incrementing it, avoiding
overflow, and clear MBE_REUSABLE_B when it is already saturated. The
next lookup then skips the entry that was just proven unusable. This
mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release
path marks the entry reusable again on the exact 1024-to-1023
transition.
Using the same QEMU harness and guest parameters, current unpatched
Linux hung in 6 of 8 420-second trials with the do_rmdir signature;
representative NMI backtraces caught the owner spinning in
ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials
without a hung-task report; the final twelve trials exercised the
reviewed overflow-safe form of the change. syzbot's patch testing also
completed without reproducing the hang.
Reported-and-tested-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e68dbebd9617a9250e8d
Fixes: 65f8b80053a1 ("ext4: fix race when reusing xattr blocks")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Tested-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260802065941.1726052-1-matthias.goergens@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Junjie Cao <junjie.cao@intel.com>
Date: Fri Jul 31 11:27:47 2026 +0800
gpio: ml-ioh: use raw_spinlock_t for the register lock
commit 600411ea1f2443fdf5b1af9b6480f616d7aff9d0 upstream.
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch.
Fixes: 54be566317b6 ("gpio-ml-ioh: Support interrupt function")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260731032747.2987292-1-junjie.cao@intel.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Fri Jul 3 20:30:02 2026 +0200
HID: core: fix number/pointer type confusion on long items
commit 28abce951343fcec26e397610868efa4e1395c3f upstream.
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this
causes the lower half of a kernel pointer to be printed into dmesg as a
number, like this:
hid (null): invalid report_size 107953555
To fix it, let item_udata() and item_sdata() verify that the item is in
short format.
Note that this bug only affects hid_scan_report(), while the main parsing
pass hid_parse_collections() will always bail out when encountering a long
item.
Sidenote: There are currently no users of data.longdata; maybe we should
just remove any parsing of long-format descriptors as a follow-up.
Fixes: 3dc8fc083dbf ("HID: Use hid_parser for pre-scanning the report descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baul Lee <baul.lee@xbow.com>
Date: Sun Jul 26 15:50:24 2026 +0900
HID: core: fix OOB read of field->usage in hid_set_field()
commit a13cdb19fcb223ed41bdab3bab42b98dba87e90b upstream.
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Bommarito <michael.bommarito@gmail.com>
Date: Thu Jul 9 22:28:53 2026 -0400
HID: hyperv: validate initial device info bounds
commit 934b7778aa7b7c8f6bb073d2a73ba3674885bae0 upstream.
The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO
messages that contain a HID descriptor followed by the report descriptor
bytes. mousevsc_on_receive_device_info() trusts bLength and
wDescriptorLength without checking that the received packet contains both
byte ranges.
A malformed host or backend message can therefore make the guest read
past the received VMBus packet while copying the report descriptor. Pass
the received initial-device-info size into the parser and reject
descriptor lengths that exceed the packet.
Impact: A malicious Hyper-V host or backend can crash a guest by sending
a short initial device-info message with an oversized HID report
descriptor length.
Fixes: b95f5bcb811e ("HID: Move the hid-hyperv driver out of staging")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Date: Tue Jul 28 22:15:57 2026 -0600
HID: magicmouse: do not keep a stale msc->input if no input is claimed
commit 0af3b89705688af01aa06025b84fa7a1e06ba6cc upstream.
magicmouse_input_mapping() caches the first hid_input's input_dev in
msc->input while the report descriptor is parsed, and the rest of the
driver treats a non-NULL msc->input as proof that an input device was
registered.
That does not hold on the hid-input error path. If hidinput_connect()
fails -- for instance because input_register_device() returns an error --
it unwinds through hidinput_disconnect(), which frees every input_dev it
created, including the one cached in msc->input.
The failure does not abort the probe. hid_connect() only skips the claim:
if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
connect_mask & HID_CONNECT_HIDINPUT_FORCE))
hdev->claimed |= HID_CLAIMED_INPUT;
and the "device has no listeners" bailout below it does not fire for this
driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad
2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore
returns 0 and magicmouse_probe() continues with msc->input pointing at
freed memory. Being non-NULL, it passes the "input not registered" check
in probe and the NULL checks in ->raw_event and ->event, so the next
input report dereferences freed memory.
Clear msc->input when the HID core did not claim an input device, so the
existing NULL checks cover this case as well.
Fixes: f1a9a149abc8 ("HID: magicmouse: fix race between input_register() and probe()")
Link: https://lore.kernel.org/linux-input/20260728185542.65F091F000E9@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Reviewed-by: Alec Hall <signshop.alec@gmail.com>
Tested-by: Alec Hall <signshop.alec@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lee Jones <lee@kernel.org>
Date: Thu Apr 16 14:16:54 2026 +0100
HID: magicmouse: Prevent out-of-bounds (OOB) read during DOUBLE_REPORT_ID
commit d93ba918a185aca2594da63e92fdc5495b559c0f upstream.
It is currently possible for a malicious or misconfigured USB device to
cause an out-of-bounds (OOB) read when submitting reports using
DOUBLE_REPORT_ID by specifying a large report length and providing a
smaller one.
Let's prevent that by comparing the specified report length with the
actual size of the data read in from userspace. If the actual data
length ends up being smaller than specified, we'll politely warn the
user and prevent any further processing.
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ibrahim Hashimov <security@auditcode.ai>
Date: Wed Jul 15 13:52:53 2026 +0200
HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler()
commit 27b376b945c0aac46fcdfcc950b14a85b874b557 upstream.
joycon_ctlr_read_handler() casts an incoming HID input report to
struct joycon_input_report and parses it, guarding the cast only with a
12-byte length check:
if (size >= 12) /* make sure it contains the input report */
joycon_parse_report(ctlr, (struct joycon_input_report *)data);
struct joycon_input_report is 49 bytes: a 13-byte header followed by a
union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report()
-> joycon_parse_imu_report() walks that union (struct offsets 13..48),
so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes
the guard yet is read up to 37 bytes past its declared length. The
over-read bytes are decoded into accelerometer/gyroscope values and
forwarded to userspace through the "(IMU)" input device, leaking
driver-internal memory. data[0] and size are fully controlled by a
malicious or spoofed Joy-Con/Pro Controller.
Receive buffers are sized to the maximum report length, so this is an
over-read within the allocation rather than a slab OOB, but the decoded
bytes still reach userspace.
The sibling subcmd path in joycon_ctlr_handle_event() already bounds the
same cast correctly:
if (size < sizeof(struct joycon_input_report) ||
data[0] != JC_INPUT_SUBCMD_REPLY)
break;
Use the same sizeof(struct joycon_input_report) bound here.
Fixes: 2af16c1f846b ("HID: nintendo: add nintendo switch controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Tue Jul 7 15:15:44 2026 +0800
HID: sensor: custom: Fix use-after-free in enable_sensor
commit ad8fb82b04422f49530d2aa2753cc81d1c60102c upstream.
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260623021950.1736413-1-haoxiang_li2024@163.com?part=1
Fixes: 4a7de0519df5 ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhiling Zou <zhilinz@nebusec.ai>
Date: Fri Aug 21 19:11:14 2026 -0400
inet: frags: publish queues before arming timer
[ Upstream commit 653d7ddf6cba867777a3d14c4f83ace008c5ad13 ]
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference.
Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Date: Mon Aug 24 11:34:34 2026 -0400
Input: atkbd - skip deactivate for HONOR FMB-P's internal keyboard
[ Upstream commit 2aaf33c6e1e82561d7dce2345298a985a2483266 ]
After commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd -
do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID"), HONOR
FMB-P, aka HONOR MagicBook Pro 14 2025's internal keyboard stops
working. Adding the atkbd_deactivate_fixup quirk fixes it.
DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025
Fixes: 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Reported-by: Mikura Kyouka <mikurakyouka@aosc.io>
Reported-by: foad.elkhattabi <foad.elkhattabi@gmail.com>
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251022-honor-v1-1-ff894ed271a9@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 410c44b10967 ("Input: atkbd - skip deactivate for HONOR ZQC-P")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Donglin Lyu <DongLin_Lyu@outlook.com>
Date: Mon Aug 24 11:34:35 2026 -0400
Input: atkbd - skip deactivate for HONOR ZQC-P
[ Upstream commit 410c44b1096789d0c40fbee706520e981dba7bc1 ]
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9fbf ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Linmao Li <lilinmao@kylinos.cn>
Date: Mon Aug 24 11:01:07 2026 -0400
Input: byd - synchronize timer deletion before freeing private data
[ Upstream commit c83e79c0842ed29860648bcce5022ef0ba5001c6 ]
byd_disconnect() uses timer_delete() before freeing the driver's private
data. This does not wait for a running byd_clear_touch() callback, which
dereferences the private data and its psmouse pointer. A callback racing
with disconnect can therefore access the private data after it has been
freed. The timer can also still be re-armed by byd_process_byte() while
the disconnect is in progress.
Use timer_shutdown_sync() before freeing the private data: it waits for
a running callback and turns any later re-arm attempt into a no-op.
Fixes: 2d5f5611dd0d ("Input: byd - enable absolute mode")
Cc: stable@vger.kernel.org
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260720061259.1601281-1-lilinmao@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ changed `del_timer()` to `timer_shutdown_sync()` since 6.12 predates the `del_timer()` → `timer_delete()` rename ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Joanne Koong <joannelkoong@gmail.com>
Date: Mon Sep 22 11:00:42 2025 -0700
iomap: adjust read range correctly for non-block-aligned positions
commit 7aa6bc3e8766990824f66ca76c19596ce10daf3e upstream.
iomap_adjust_read_range() assumes that the position and length passed in
are block-aligned. This is not always the case however, as shown in the
syzbot generated case for erofs. This causes too many bytes to be
skipped for uptodate blocks, which results in returning the incorrect
position and length to read in. If all the blocks are uptodate, this
underflows length and returns a position beyond the folio.
Fix the calculation to also take into account the block offset when
calculating how many bytes can be skipped for uptodate blocks.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Miguel Gazquez (Schneider Electric) <miguel.gazquez@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yong Wang <edragain@163.com>
Date: Fri Aug 14 01:35:26 2026 +0800
ipv4: reject undersized MTUs in ip_do_fragment()
commit c0726f0caf8c6b3208552949e17d23634a2f3129 upstream.
ip_do_fragment() subtracts the IPv4 header length from the effective
MTU and passes the resulting payload MTU to ip_frag_next().
If the effective MTU is smaller than hlen + 8, ip_frag_next() rounds
the fragment payload length down to zero. The fragmentation state then
never makes forward progress: state->left, state->ptr and state->offset
stay unchanged while ip_do_fragment() keeps allocating and transmitting
header-only fragments until the softlockup detector fires.
This is reproducible with a route installed using "mtu lock 20", but it
is also reproducible without route MTU lock, for example by forwarding a
packet to a device whose MTU is 20.
Fix it in ip_do_fragment() by rejecting mtu < hlen + 8 with -EMSGSIZE,
matching the existing IPv6 fragmentation check.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Yong Wang <edragain@163.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/8809ef6314b98913681b0b370a05a85c2b6cd579.1786599079.git.edragain@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luxiao Xu <rakukuip@gmail.com>
Date: Wed Aug 12 20:54:38 2026 +0800
ipv6: fix use-after-free in ip6_finish_output2()
commit d0d48d999b0eee6bb176ef4e39d9be868fa80f7e upstream.
ip6_finish_output2() caches a pointer to the IPv6 destination
address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF
transmit path or other encapsulation operations within
lwtunnel_xmit() can reallocate the skb head, freeing the memory
that daddr points to. When lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale
daddr pointer to compute the nexthop and to look up or create the
neighbour entry. This results in a use-after-free read, which can
leak sensitive kernel data, pollute the neighbour table with
arbitrary values, misdirect traffic, or crash the system.
Fix this by re-fetching the IPv6 header and the destination
address pointer after lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop
computation and neighbour lookup operate on valid memory.
Fixes: e415ed3a4b8b ("ipv6: use skb_expand_head in ip6_finish_output2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/4aa3f53bc44e79572c6dd2340ec7b68ef1a3d87d.1786516730.git.rakukuip@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu Jul 16 08:01:29 2026 +0900
kcov: fix data corruption and race conditions on PREEMPT_RT
commit 2eed77fdcb0cc48e8eccb2bcd4b7f2c6d650e84c upstream.
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems.
Link: https://lore.kernel.org/43552d09-2ce2-4b19-b0d3-a2d1ab952145@I-love.SAKURA.ne.jp
Reported-by: syzbot+3f51ad7ac3ae57a6fdcc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3f51ad7ac3ae57a6fdcc
Reported-by: syzbot+47cf95ca1f9dcca872c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=47cf95ca1f9dcca872c8
Reported-by: syzbot+8a173e13208949931dc7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a173e13208949931dc7
Reported-by: syzbot+90984d3713722683112e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=90984d3713722683112e
Analyzed-by: AI Mode in Google Search (no mail address)
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pavitra Jha <jhapavitra98@gmail.com>
Date: Wed Jul 8 01:39:41 2026 -0400
libceph: fix OOB read in decode_watchers() via missing bounds check
commit 00ead17c7de137a692edee59f2772e6af687e8eb upstream.
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ]
Cc: stable@vger.kernel.org
Fixes: a4ed38d7a180 ("libceph: support for CEPH_OSD_OP_LIST_WATCHERS")
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[ kept the tree's `kcalloc()` context line instead of upstream's `kzalloc_objs()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Aug 27 14:29:06 2026 +0200
Linux 6.1.185
Link: https://lore.kernel.org/r/20260825132541.677185791@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sukrut Bellary <sukrut.bellary@linux.com>
Date: Mon Sep 2 15:14:09 2024 +0100
misc: fastrpc: Fix double free of 'buf' in error path
commit e8c276d4dc0e19ee48385f74426aebc855b49aaf upstream.
smatch warning:
drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf'
In fastrpc_req_mmap() error path, the fastrpc buffer is freed in
fastrpc_req_munmap_impl() if unmap is successful.
But in the end, there is an unconditional call to fastrpc_buf_free().
So the above case triggers the double free of fastrpc buf.
Fixes: 72fa6f7820c4 ("misc: fastrpc: Rework fastrpc_req_munmap")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240902141409.70371-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Date: Thu Aug 20 10:55:01 2026 -0400
misc: fastrpc: Remove buffer from list prior to unmap operation
[ Upstream commit 6102ceb4eab845743ee57acd3863fbd06e93c927 ]
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list.
Fixes: 2419e55e532de ("misc: fastrpc: add mmap/unmap support")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Abel Vesa <abelvesa@kernel.org>
Date: Thu Aug 20 10:55:00 2026 -0400
misc: fastrpc: Rework fastrpc_req_munmap
[ Upstream commit 72fa6f7820c4cf96c5f7aabc4e54bdf52d1e2ac2 ]
Move the lookup of the munmap request to the fastrpc_req_munmap and pass
on only the buf to the lower level fastrpc_req_munmap_impl. That way
we can use the lower level fastrpc_req_munmap_impl on error path in
fastrpc_req_mmap to free the buf without searching for the munmap
request it belongs to.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 6102ceb4eab8 ("misc: fastrpc: Remove buffer from list prior to unmap operation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Aug 24 19:50:38 2026 -0400
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
[ Upstream commit 9634cb35af17019baec21ca648516ce376fa10e6 ]
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely".
Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-4-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a7aad5b69d3b ("mptcp: pm: fix data race in add_addr timer callback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Aug 24 19:50:39 2026 -0400
mptcp: pm: ADD_ADDR rtx: free sk if last
[ Upstream commit b7b9a461569734d33d3259d58d2507adfac107ed ]
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.
If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().
But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself".
Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-5-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a7aad5b69d3b ("mptcp: pm: fix data race in add_addr timer callback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qing Luo <luoqing@kylinos.cn>
Date: Mon Aug 24 19:50:40 2026 -0400
mptcp: pm: fix data race in add_addr timer callback
[ Upstream commit a7aad5b69d3bdaec20a3ed9284e184502450c0cd ]
The timer callback reads entry->retrans_times outside pm.lock to decide
whether to call mptcp_pm_subflow_established(). Since
mptcp_pm_announced_del_timer() can concurrently set retrans_times =
ADD_ADDR_RETRANS_MAX under pm.lock, a race condition exists.
I discovered this issue while studying the code. AI tools helped me to
verify the issue can potentially happen under race conditions.
Use a local 'retransmit' flag set inside pm.lock to capture whether
retransmission is still possible when the lock is taken. This allows to
call mptcp_pm_subflow_established() accordingly, and not depending on
the situation that can be different when checked outside the pm.lock.
Fixes: 348d5c1dec60 ("mptcp: move to next addr when timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-4-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 14 14:07:05 2025 +0000
ndisc: ndisc_send_redirect() cleanup
commit 0784d83df3bfc977c13252a0599be924f0afa68d upstream.
ndisc_send_redirect() is always called under rcu_read_lock().
It can use dev_net_rcu() and avoid one redundant
rcu_read_lock()/rcu_read_unlock() pair.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214140705.2105890-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Aug 21 10:49:39 2026 -0400
net/packet: convert po->pressure to an atomic flag
[ Upstream commit 791a3e9f1a86fe8eb09173c9788493b8b5c957f4 ]
Not only this removes some READ_ONCE()/WRITE_ONCE(),
this also removes one integer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 1a35da325cac ("packet: synchronize pressure clearing with ring reconfiguration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Aug 27 06:40:25 2026 +0000
net: gro: properly validate BIG TCP aggregation criteria
When GRO attempts to aggregate IPv6 packets beyond GRO_LEGACY_MAX_SIZE
(64KB), the aggregate should only be permitted for plain IPv6 TCP flows
that have sufficient MAC header room to insert the temporary HBH jumbo header.
In 6.1.y, skb_gro_receive() had two issues with this check:
1. It checked skb_headroom(p) instead of the actual space before the MAC
header (p->mac_header). Because skb_headroom(p) measures (data - head),
it includes mac_len. Crafted frames (e.g. injected via AF_PACKET) can
pass the check with p->mac_header < 8 bytes. When ipv6_gro_complete()
inserts the temporary HBH jumbo header, the memmove() starts before
skb->head, causing an out-of-bounds write and wrapping skb->mac_header.
2. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark,
which is 0 during receive, failing to reject encapsulated IPv6 flows
(such as IP6IP6).
Fix skb_gro_receive() to strictly check:
- p->protocol == htons(ETH_P_IPV6)
- p->mac_header >= sizeof(struct hop_jumbo_hdr)
- ipv6_hdr(p)->nexthdr == IPPROTO_TCP
- Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation)
Returning -E2BIG from skb_gro_receive() ensures that packets which cannot
become BIG TCP are cleanly flushed at <= 64KB and delivered intact without
dropping.
This issue does not exist in mainline (7.0+) because the subsystem was
rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX
side"), making this fix relevant only for older stable branches like
6.18.y.
Fixes: 0fe79f28bfaf ("net: allow gro_max_size to exceed 65536")
Reported-by: Sam Dlinn <sledge@meta.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Wed Jun 3 16:13:55 2026 +0200
nfc: digital: clamp SENSF_RES length to the destination buffer
commit 344a56d7c8e0f3cbaff0bcb1bcd95a1a1db24b16 upstream.
digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote
NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res
field without an upper-bound check. A nearby malicious NFC-F device can
send an oversized SENSF_RES response to overflow the stack-local struct
nfc_target.
Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 8c0695e4998d ("NFC Digital: Add NFC-F technology support")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260603141355.68156-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bryam Vargas <hexlabsecurity@proton.me>
Date: Tue Jun 16 23:33:35 2026 -0500
nfc: fdp: bound the device-reported read length and fix an skb leak
commit 7ad21dcfeb5181af0c3ee2608808c0c0a5283aa1 upstream.
fdp_nci_i2c_read() takes the next packet length from two device-supplied
bytes and never validates it. The value is a u16 used as the
i2c_master_recv() count into a 261-byte on-stack buffer: a malicious,
counterfeit or malfunctioning controller (or an i2c bus interposer) can
drive it far past the buffer for a stack out-of-bounds write that
clobbers the canary and return address, or below the minimum frame size
(directly, or by truncating the computed sum) so the header/LRC strip
and the next length read run past a short receive. Reject a length
outside [FDP_NCI_I2C_MIN_PAYLOAD, FDP_NCI_I2C_MAX_PAYLOAD], as a
corrupted packet already is, and force resynchronization.
The same loop allocates one data skb per iteration and assumes a length
packet followed by a data packet; a device that sends two data packets
in one call leaks the first skb when the second allocation overwrites
it. Free a previously allocated skb before allocating the next.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Cc: stable@vger.kernel.org
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260616-b4-disp-b1f8ab4c-v2-1-2d1fe5955325@proton.me
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Thu Jul 9 15:12:29 2026 +0200
nfc: llcp: bound the connect_sn TLV walk to the skb
commit 55c68ac93e7dacc0f5f608b9c39dd4ff48cf28e8 upstream.
Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and
add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(),
and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in
TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and
nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same
pattern remains unbounded: nfc_llcp_connect_sn().
nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header
(type, length) followed by length bytes of value, without checking that
the two header bytes or the declared length stay within the buffer. It
returns a pointer to a service name of up to 255 bytes that may point
past the end of the skb; it is subsequently consumed by memcmp() in
nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as
"skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter
than the LLCP header underflows to a huge length and the walk runs far
past the buffer.
nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and
nfc_llcp_recv_cc(), i.e. from received CONNECT and CC PDUs. A nearby
NFC device can reach this without authentication; LLCP link activation
happens automatically after NFC-DEP, and the nfc_llcp_rx_skb()
dispatcher applies no minimum-length guard.
Walk the TLV list by pointer, bounded by skb_tail_pointer(skb), and
validate each declared length before use, matching the approach already
used for nfc_llcp_recv_snl(). Starting the walk at
&skb->data[LLCP_HEADER_SIZE] against the tail pointer also removes the
size_t underflow for short frames.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709131229.44477-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Muhammad Bilal <meatuni001@gmail.com>
Date: Mon Jun 22 18:18:02 2026 +0500
nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers
commit 78b20c8eeacd2e44a2d8a4cb5316d3c521d90911 upstream.
nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain
three related bugs in their TLV parsing loops:
1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data
advances offset past 255 it silently wraps to zero, causing
infinite loops or double-processing of buffer data.
2. Before reading tlv[0] (type) and tlv[1] (length) there is no
check that offset+2 <= tlv_array_len. A truncated TLV causes
an OOB read of one byte past the buffer end.
3. After reading the length field, the value bytes are accessed
without checking offset+2+length <= tlv_array_len. A crafted
length=0xFF on a short buffer causes up to 255 bytes of OOB
read past the buffer end.
Both functions are reachable without authentication via
nfc_llcp_set_remote_gb() which feeds remote LLCP general bytes
directly into nfc_llcp_parse_gb_tlv() with no additional
validation.
Fix all three issues by widening offset from u8 to u16 and adding
bounds checks for both the TLV header and value field before each
access.
Fixes: 3df40eb3a2ea ("nfc: constify several pointers to u8, char and sk_buff")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260622131802.239035-1-meatuni001@gmail.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Tue Jul 14 18:46:31 2026 +0200
nfc: llcp: reject PDUs shorter than the LLCP header
commit 95674f506c6376d6722a23144c9acd26609771ed upstream.
Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the
receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes
before parsing it.
nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/
nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a
CONNECT or CC PDU then computes
tlv_array_len = skb->len - LLCP_HEADER_SIZE;
as a size_t and hands it to the TLV walk. When the frame is shorter than
the header the subtraction wraps to a huge value and the walk runs far
past the buffer, an out-of-bounds read.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Guard the common receive choke point __nfc_llcp_recv(), shared by both the
target (nfc_llcp_data_received()) and initiator (nfc_llcp_recv()) paths, so
a short skb is dropped before the rx_work worker parses it. Use
pskb_may_pull() rather than a skb->len test so the two header bytes are
guaranteed to sit in the skb linear area even for a non-linear skb,
matching how the sibling NCI and HCI receive paths validate their headers.
Reproduced with a KFENCE out-of-bounds read via /dev/virtual_nci on
linux-next.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: stable@vger.kernel.org
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260714164631.75068-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pengpeng Hou <pengpeng@iscas.ac.cn>
Date: Thu Jul 23 10:37:20 2026 +0800
nfc: microread: validate target discovery payload lengths
commit 25519469972ef57c3edb1805dabd6c5612b90211 upstream.
microread_target_discovered() parses target discovery payloads from
skb->data according to the HCI gate. The fixed field offsets and UID
copies were checked only against the destination nfc_target buffers, not
against the actual skb length.
Validate that each gate-specific payload contains the fixed fields and
UID bytes before reading or copying them.
Fixes: cfad1ba87150 ("NFC: Initial support for Inside Secure microread")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260723103508.1-microread-v2-pengpeng@iscas.ac.cn
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Samuel Page <sam@bynar.io>
Date: Mon Jun 22 16:52:43 2026 +0200
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
commit ac200079db50af81e6b04d058b33ec92901d8edd upstream.
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the
limit. The append then writes a struct nfc_target past the end of the
array (a slab out-of-bounds write), and nfc_targets_found() goes on to
walk the array with the inflated count:
BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]
Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12
Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]
Call trace:
nci_add_new_protocol+0x94/0x2ac [nci]
nci_ntf_packet+0xddc/0x11a0 [nci]
nci_rx_work+0x15c/0x1e0 [nci]
process_one_work+0x2dc/0x500
worker_thread+0x240/0x460
kthread+0x1c0/0x1d0
ret_from_fork+0x10/0x20
The buggy address belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1024 bytes to the right of
allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)
Guard nci_target_auto_activated() with the same check used by
nci_add_new_target().
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260622145243.3167276-1-sam@bynar.io
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Samuel Page <sam@bynar.io>
Date: Fri Jun 26 10:03:01 2026 +0100
nfc: nci: fix uninit-value in the RF discover/activated NTF handlers
commit 8cbe06c1e699c0a165dae5093a2550e65f914818 upstream.
nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each
parse a notification into an on-stack struct (nci_rf_discover_ntf /
nci_rf_intf_activated_ntf) that is not initialised. The RF
technology-specific parameters are only extracted when
rf_tech_specific_params_len is non-zero, so a notification that reports a
zero length leaves the rf_tech_specific_params union uninitialised - and
both handlers then pass it to nci_add_new_protocol(), which reads it:
- discover: nci_add_new_target() -> nci_add_new_protocol();
- activated: nci_target_auto_activated() -> nci_add_new_protocol().
nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch
condition and a memcpy() length and copies nfcid1/sens_res/sel_res into
ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET.
BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0
nci_add_new_protocol+0x624/0x6c0
nci_ntf_packet+0x25b2/0x3c30
nci_rx_work+0x318/0x5d0
process_scheduled_works+0x84b/0x17a0
worker_thread+0xc10/0x11b0
kthread+0x376/0x500
Local variable ntf.i created at:
nci_ntf_packet+0xbc2/0x3c30
Zero-initialise both on-stack notifications so the union reads back as
zero when no technology-specific parameters are present.
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Fixes: e8c0dacd9836 ("NFC: Update names and structs to NCI spec 1.0 d18")
Link: https://lore.kernel.org/netdev/20260623172109.1105965-2-horms@kernel.org/
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Link: https://patch.msgid.link/20260626090301.2139500-1-sam@bynar.io
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Linmao Li <lilinmao@kylinos.cn>
Date: Tue Jul 21 10:35:18 2026 +0800
nfc: nci: free destination parameters when closing a connection
commit 2e65bafdfd3a8bba972b3d17b6a57816557530fc upstream.
When a connection is closed, nci_core_conn_close_rsp_packet() frees
conn_info but not conn_info->dest_params, which is a separate devm
allocation. Each connect/close cycle leaks one dest_params until the
NFC device is removed. Free dest_params along with conn_info.
Fixes: 9b8d1a4cf2aa ("nfc: nci: Add an additional parameter to identify a connection id")
Cc: stable@vger.kernel.org
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260721023518.1697625-1-lilinmao@kylinos.cn
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xu Rao <raoxu@uniontech.com>
Date: Mon Jul 20 10:14:44 2026 +0800
nfc: pn533: purge fragmented skbs during cleanup
commit 5718fc62198c38c2de5316020a90506f9e75e0bb upstream.
pn53x_common_clean() purges resp_q before freeing the common PN533 state,
but it leaves fragment_skb untouched. The fragmentation helpers queue
transmit fragments there while sending large initiator or target-mode
frames, and those skbs remain owned by the driver until they are sent or
discarded.
If the device is removed while fragments are still queued, the common
cleanup path frees the PN533 state without releasing the queued fragment
skbs, leaking them.
Purge fragment_skb during cleanup alongside resp_q.
Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/2D896607CAE4408E+20260720021444.3362044-1-raoxu@uniontech.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Sat Jul 11 09:13:01 2026 +0200
nfc: st21nfca: validate ATR_REQ length against the received frame
commit 5cdcca5d62a66eda6b774110a44cba67bc1a8d1d upstream.
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested.
Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260711071301.58071-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Koichiro Den <den@valinux.co.jp>
Date: Thu Aug 20 23:59:23 2026 -0400
NTB: ntb_netdev: Preserve RX queue depth on allocation failure
[ Upstream commit d2121faf133ac3bf9531b53a7e21273649a08517 ]
ntb_netdev_rx_handler() hands the received skb to the network stack
before allocating its replacement. If the allocation fails, nothing is
reposted. Every failure therefore takes one buffer out of the RX queue
while the interface remains up, and enough failures eventually stall
reception.
A retry path could refill the queue later, but ntb_netdev has none.
Allocate the replacement first instead. If that fails, drop the packet
and repost the same skb. This keeps the queue full and lets packet
delivery resume as soon as memory is available again.
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260806032537.3526498-1-den@valinux.co.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ kept HEAD's `struct net_device *ndev = qp_data;` declaration instead of the per-queue context variables, adding only `new_skb` to the existing `skb` declaration ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rik van Riel <riel@surriel.com>
Date: Sat Aug 8 11:42:39 2026 -0400
null_blk: fix UBSAN shift-out-of-bounds when zone_size is 0 or overflows
commit 95491fb05105b61050cb623a5e0227eb26aa3525 upstream.
null_zone_no() does sect >> ilog2(dev->zone_size_sects). When
zone_size_sects is 0, ilog2(0) returns -1, producing shift exponent -1
which UBSAN reports as shift-out-of-bounds.
UBSAN: shift-out-of-bounds in drivers/block/null_blk/zoned.c:21:14
shift exponent -1 is negative
Call Trace:
null_zone_no drivers/block/null_blk/zoned.c:21 [inline]
null_process_zoned_cmd+0xf76/0xf80 drivers/block/null_blk/zoned.c:728
null_handle_cmd drivers/block/null_blk/main.c:1455 [inline]
null_queue_rq+0x8bc/0xe70 drivers/block/null_blk/main.c:1703
__blk_mq_issue_directly block/blk-mq.c:2694 [inline]
blk_mq_try_issue_directly+0x3f4/0x880 block/blk-mq.c:2754
blk_mq_submit_bio+0x20c0/0x2a40 block/blk-mq.c:3208
submit_bio_noacct_nocheck+0x2f4/0xa40 block/blk-core.c:790
block_read_full_folio+0x7a6/0x810 fs/buffer.c:2463
filemap_read_folio+0x12c/0x3a0 mm/filemap.c:2510
read_part_sector+0xb6/0x2b0 block/partitions/core.c:724
adfspart_check_ICS+0xb1/0x960 block/partitions/acorn.c:357
check_partition block/partitions/core.c:143 [inline]
blk_add_partitions block/partitions/core.c:591 [inline]
bdev_disk_changed+0x851/0x17a0 block/partitions/core.c:695
blkdev_get_whole+0x372/0x510 block/bdev.c:751
add_disk_final block/genhd.c:412 [inline]
add_disk_fwnode+0x24b/0x3a0 block/genhd.c:606
null_add_dev+0x130b/0x1d70 drivers/block/null_blk/main.c:2052
nullb_device_power_store+0x240/0x380 drivers/block/null_blk/main.c:501
configfs_write_iter+0x337/0x430 fs/configfs/file.c:229
Syzkaller triggers this by creating a zoned null_blk device via
configfs. The Call Trace shows configfs_write_iter in configfs/file.c
handling a write to power file, which calls nullb_device_power_store in
main.c, which calls null_add_dev in main.c, which calls add_disk in
genhd.c, which triggers partition scan via bdev_disk_changed in
partitions/core.c.
A zoned null_blk device with zone_size 0 should not be legal. Existing
code tries to reject it via is_power_of_2() check in zoned.c and
!zone_size check in main.c, but syzkaller can still reach
null_zone_no() with zone_size_sects 0 via two paths:
1. Direct 0 via configfs: zone_size attribute store in main.c has
NULLB_DEVICE_ATTR(zone_size, ulong, NULL) with no validation callback,
so echo 0 > zone_size succeeds before power store. If zoned is false
at power store time, the !zone_size check in main.c is skipped, and
later zoned set true leaves zone_size 0.
2. Large value overflow: mb_to_sects() in zoned.c does
(sector_t)mb * SZ_1M >> SECTOR_SHIFT which is mb * 2048. If mb is
1UL << 53 (9PB), mb * 2048 overflows 64-bit to 0. The value is
power-of-two so is_power_of_2() passes, but mb_to_sects() returns 0.
Check for zero zone_size explicitly in null_init_zoned_dev() in
zoned.c, returning -EINVAL with "must be non-zero power-of-two".
Check for zero zone_size_sects after mb_to_sects() conversion,
returning -EINVAL for overflow case. Keep defensive check in
null_zone_no() returning 0 for zero sectors to avoid shift out-of-bounds
even if zero slips through.
This change should be safe because zone_size is set once in
null_init_zoned_dev() under device lock and never changes after, and 0
is never valid for a zoned device. Returning -EINVAL at init time fails
device creation early with clear error, while defensive return 0 in
null_zone_no() makes zoned command fail via offline zone check.
No new locking is introduced.
Reported-by: syzbot+abd6a8dca0f2b7726060@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=abd6a8dca0f2b7726060
Link: https://lore.kernel.org/all/6a75205c.01d0871a.3a0d52.0033.GAE@google.com/
Fixes: 8a3cf049af68 ("null_blk: add zoned block device emulation")
Cc: stable@vger.kernel.org
Assisted-by: Hermes:muse-spark-1.2 syzkaller
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260808114239.69167f68@fangorn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bryam Vargas <hexlabsecurity@proton.me>
Date: Thu Jul 2 03:45:14 2026 -0500
nvmet-auth: zero the AUTH_RECEIVE response buffer
commit 3ddcfb013322aa37eaa7a0d344b73079c38dfa21 upstream.
nvmet_execute_auth_receive() allocates the response buffer with kmalloc()
sized by the host-supplied AUTH_RECEIVE allocation length, but the
DH-HMAC-CHAP builders write only a fixed-size message into it. The full
allocation length is then copied to the wire by nvmet_copy_to_sgl(), so a
remote initiator receives the bytes past the built message -- up to nearly
a page of uninitialized slab -- during the pre-authentication handshake.
Allocate the buffer with kzalloc() so the unwritten tail is zeroed before
it is sent; conforming responses are unaffected.
Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiang HongHui <jiang_hh2019@163.com>
Date: Wed Jul 29 19:02:06 2026 +0800
nvmet-fc: fix invalid free in LS IOD error path
commit ba98d6796d12258e837ece065d2ecb59d76ce4ff upstream.
nvmet_fc_alloc_ls_iodlist() advances iod while initializing the LS IOD
array. If an rqstbuf allocation or response buffer DMA mapping fails,
the unwind loop decrements iod past the start of the array. The final
kfree(iod) therefore frees an address before the allocated object.
This can be reproduced with nvme-fcloop and failslab by setting
fail-nth to 6 before creating a target port. KASAN reports:
BUG: KASAN: invalid-free in nvmet_fc_register_targetport
Free of addr ffff88816cf8ff48 by task nvmet_fail_nth/9552
Free the original allocation base stored in tgtport->iod instead. With
this fix applied, the same sysfs write with fail-nth=6 returns -ENOMEM
without any KASAN report.
Fixes: c53432030d86 ("nvme-fabrics: Add target support for FC transport")
Cc: stable@vger.kernel.org
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Assisted-by: Codex:gpt-5
Signed-off-by: Jiang HongHui <jiang_hh2019@163.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Jul 27 22:03:31 2026 +0200
nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations
commit 737a3b535247226f6e1a7988fd9d6e63e7d6fc71 upstream.
When fuzzing the nvme target code, I tripped a kernel warning in
nvmet_tcp_map_data() because the length passed into the allocator is
controlled by the remote initiator.
A remote initiator that sends a command with an SGL claiming a huge
number, can create a scatterlist and iovec allocation of over 1 million
entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER
and then the page allocator will trip on a WARN_ON_ONCE_GFP() message:
WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
...
sgl_alloc_order
nvmet_tcp_map_data
nvmet_tcp_try_recv_pdu
As it's never good to trip a kernel warning remotely due to many systems
having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to
the allocation flags.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ian Bridges <icb@fastmail.org>
Date: Thu Jul 23 23:57:03 2026 -0500
ocfs2: fix missing metadata reservation for large xattrs
commit 0cdc7dde00ec63ac714271fa8b2918d630b8da1a upstream.
[BUG]
lsetxattr() panics the kernel when setting a large xattr value on a
fragmented filesystem where the file already has an external xattr
block.
[CAUSE]
ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new
xattr value's extent tree when the file already has an external xattr
block. The not_found path leaves meta_add at zero, so meta_ac is NULL
when ocfs2_xattr_extend_allocation() runs.
A new value root has room for a single extent record. On a fragmented
filesystem, the allocator cannot satisfy the xattr value in one
contiguous run, so each non-contiguous run requires its own extent
record. When the value root's extent list is full and meta_ac is NULL,
ocfs2_add_clusters_in_btree() returns RESTART_META, and
ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META).
[FIX]
The case where no xattr block exists yet already calls
ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree
metadata. Add the same reservation to the case where an xattr block
already exists, making the two cases consistent.
Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is
returned despite the reservation, the error propagates to userspace
instead of panicking the kernel.
Link: https://lore.kernel.org/amLwn3i9tET8yhG7@dev
Fixes: a78f9f466894 ("ocfs2: make xattr extension work with new local alloc reservation.")
Signed-off-by: Ian Bridges <icb@fastmail.org>
Reported-by: syzbot+e538032956b1157914a3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e538032956b1157914a3
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zihan Xi <zihanx@nebusec.ai>
Date: Fri Aug 21 10:49:40 2026 -0400
packet: synchronize pressure clearing with ring reconfiguration
[ Upstream commit 1a35da325cac4d5bcad76a2aa943408a6f1d9000 ]
packet_set_ring() updates the RX ring state under sk_receive_queue.lock,
but used to publish the tpacket receive mode through po->prot_hook.func
after releasing that lock. packet_poll() and packet_recvmsg() can then
run the pressure clearing path after the ring has been cleared while
still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference
stale or NULL ring storage.
Move the existing receive hook assignment into the same
sk_receive_queue.lock section as the ring state update. Keep the
assignment otherwise unchanged, including on TX ring reconfiguration, to
avoid adding behavior changes that are not required for the fix.
Serialize packet_recvmsg() pressure clearing with the same queue lock
only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear
and the socket has moved away from tpacket_rcv, packet_set_ring() has
already detached the socket and waited for synchronize_net(), so no new
packet input can set the flag again.
packet_poll() already holds sk_receive_queue.lock, so it uses the new
unlocked helper directly.
Fixes: 2ccdbaa6d55b ("packet: rollover lock contention avoidance")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Link: https://patch.msgid.link/f90b5688311fa278d1361ea8c6be0bf25967d591.1785247446.git.zihanx@nebusec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qihang Tang <q.h.hack.winter@gmail.com>
Date: Fri Aug 21 07:00:16 2026 -0400
packet: use consistent hard_header_len in non-ring send paths
[ Upstream commit 03390aa32e669cc4ecd7d34108e2e1afc13d689d ]
packet_snd() reads dev->hard_header_len multiple times while allocating
and constructing an skb. Device reconfiguration can change this value
concurrently, for example through bonding device type changes.
For SOCK_RAW, packet_snd() can save a larger value in reserve and later
allocate headroom using a smaller value. Moving skb->data back by reserve
then places it before skb->head, and the following copy from userspace can
attempt an out-of-bounds write.
packet_sendmsg_spkt() has the same issue because it calculates its
reservation and header offset from separate reads before dropping the RCU
read lock to allocate the skb.
Add LL_RESERVED_SPACE_EX() for callers that already saved a header length.
Read hard_header_len once in packet_snd() and use it for allocation and
construction. In packet_sendmsg_spkt(), preserve the allocation-time value
through the device lookup retry.
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-3-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 21b5953e7494 ("packet: use consistent hard_header_len in TX_RING send path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qihang Tang <q.h.hack.winter@gmail.com>
Date: Fri Aug 21 07:00:17 2026 -0400
packet: use consistent hard_header_len in TX_RING send path
[ Upstream commit 21b5953e7494c16a42e6cd8cf110e18d13ae4a6b ]
tpacket_snd() reads dev->hard_header_len independently for skb
allocation and header construction in tpacket_fill_skb(). Concurrent
netdevice reconfiguration can therefore make the reserved headroom
smaller than the amount later pushed, or make copylen - hard_header_len
negative.
Snapshot hard_header_len once before processing ring frames and use it
for the frame limit, headroom allocation, copy length, and skb
construction. Pass the snapshot to tpacket_fill_skb().
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-4-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steffen Persvold <spersvold@gmail.com>
Date: Thu Jul 9 14:24:46 2026 +0200
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
commit 008cb88edb41f3c7c8e0ed763ff9f26719830984 upstream.
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef23387 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260709122446.3151899-1-spersvold@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yeoreum Yun <yeoreum.yun@arm.com>
Date: Thu Aug 20 23:59:37 2026 -0400
perf/core: Fix child_total_time_enabled accounting bug at task exit
[ Upstream commit a3c3c66670cee11eb13aa43905904bf29cb92d32 ]
The perf events code fails to account for total_time_enabled of
inactive events.
Here is a failure case for accounting total_time_enabled for
CPU PMU events:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 2s
...
armv8_pmuv3_0/event=0x08/: 1138698008 2289429840 2174835740
armv8_pmuv3_1/event=0x08/: 1826791390 1950025700 847648440
` ` `
` ` > total_time_running with child
` > total_time_enabled with child
> count with child
Performance counter stats for 'stress-ng --pthread=2 -t 2s':
1,138,698,008 armv8_pmuv3_0/event=0x08/ (94.99%)
1,826,791,390 armv8_pmuv3_1/event=0x08/ (43.47%)
The two events above are opened on two different CPU PMUs, for example,
each event is opened for a cluster in an Arm big.LITTLE system, they
will never run on the same CPU. In theory, the total enabled time should
be same for both events, as two events are opened and closed together.
As the result show, the two events' total enabled time including
child event is different (2289429840 vs 1950025700).
This is because child events are not accounted properly
if a event is INACTIVE state when the task exits:
perf_event_exit_event()
`> perf_remove_from_context()
`> __perf_remove_from_context()
`> perf_child_detach() -> Accumulate child_total_time_enabled
`> list_del_event() -> Update child event's time
The problem is the time accumulation happens prior to child event's
time updating. Thus, it misses to account the last period's time when
the event exits.
The perf core layer follows the rule that timekeeping is tied to state
change. To address the issue, make __perf_remove_from_context()
handle the task exit case by passing 'DETACH_EXIT' to it and
invoke perf_event_state() for state alongside with accounting the time.
Then, perf_child_detach() populates the time into the parent's time metrics.
After this patch, the bug is fixed:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 10s
...
armv8_pmuv3_0/event=0x08/: 15396770398 32157963940 21898169000
armv8_pmuv3_1/event=0x08/: 22428964974 32157963940 10259794940
Performance counter stats for 'stress-ng --pthread=2 -t 10s':
15,396,770,398 armv8_pmuv3_0/event=0x08/ (68.10%)
22,428,964,974 armv8_pmuv3_1/event=0x08/ (31.90%)
[ mingo: Clarified the changelog. ]
Fixes: ef54c1a476aef ("perf: Rework perf_event_exit_event()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250326082003.1630986-1-yeoreum.yun@arm.com
Stable-dep-of: 42c5ca1f0a28 ("perf/core: Fix group leader use-after-free after sibling detach")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Aditya Chillara <aditya.chillara@oss.qualcomm.com>
Date: Thu Aug 20 23:59:40 2026 -0400
perf/core: Fix group leader use-after-free after sibling detach
[ Upstream commit 42c5ca1f0a288a52878bd72a5595b08261057438 ]
perf_group_detach() handles leader and sibling detach differently. When the
group leader is detached, all siblings are promoted to singleton events and
their group_leader pointer is reset to themselves. When a sibling is
detached, it is removed from the leader's sibling_list, but its
group_leader pointer is left pointing at the old leader.
That is harmless when the sibling is being closed and freed immediately, as
in the DETACH_DEAD path. It is not safe when the sibling is detached but
kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the
sibling is removed from the context, while its file descriptor can still
keep it alive.
A typical failing sequence is:
- A group contains leader L and sibling S.
- CPU hot-unplug detaches S with DETACH_GROUP, removing it from
L->sibling_list but leaving S->group_leader == L.
- L is later closed and freed.
- A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and
dereferences the freed leader.
This was reproduced by running the perf event fuzzer, CPU hotplug, and a
stress workload concurrently:
Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb
CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT
pc : perf_ioctl+0x34c/0xc68
x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b
Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908)
Call trace:
perf_ioctl+0x34c/0xc68 (P)
__arm64_sys_ioctl+0xa0/0xf4
invoke_syscall+0x58/0xe4
el0_svc_common+0xa8/0xdc
do_el0_svc+0x1c/0x28
el0_svc+0x40/0xc0
el0t_64_sync_handler+0x68/0xdc
el0t_64_sync+0x1c4/0x1c8
The fault happened in perf_ioctl(), where perf_event_for_each() follows
the stale group_leader pointer and perf_event_for_each_child() then
dereferences the freed leader's context.
Fix the use-after-free by promoting the detached sibling to a singleton.
Also fix __event_disable() cgroup accounting and event state change.
Fixes: 8a49542c0554 ("perf_events: Fix races in group composition")
Assisted-by: PatchWise:gpt-5.5
Signed-off-by: Aditya Chillara <aditya.chillara@oss.qualcomm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260807-fix-group-leader-uaf-v3-1-b0c2310c9a0d@oss.qualcomm.com
[ adjusted `event_sched_out()` calls to the older three-argument form taking `cpuctx` and kept the existing `event->pending_disable = 1;` in the DETACH_DEAD path ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Zijlstra <peterz@infradead.org>
Date: Thu Aug 20 23:59:38 2026 -0400
perf: Fix cgroup state vs ERROR
[ Upstream commit 61988e36dc5457cdff7ae7927e8d9ad1419ee998 ]
While chasing down a missing perf_cgroup_event_disable() elsewhere,
Leo Yan found that both perf_put_aux_event() and
perf_remove_sibling_event() were also missing one.
Specifically, the rule is that events that switch to OFF,ERROR need to
call perf_cgroup_event_disable().
Unify the disable paths to ensure this.
Fixes: ab43762ef010 ("perf: Allow normal events to output AUX data")
Fixes: 9f0c4fa111dc ("perf/core: Add a new PERF_EV_CAP_SIBLING event capability")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250605123343.GD35970@noisy.programming.kicks-ass.net
Stable-dep-of: 42c5ca1f0a28 ("perf/core: Fix group leader use-after-free after sibling detach")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yeoreum Yun <yeoreum.yun@arm.com>
Date: Thu Aug 20 23:59:39 2026 -0400
perf: Fix dangling cgroup pointer in cpuctx
[ Upstream commit 3b7a34aebbdf2a4b7295205bf0c654294283ec82 ]
Commit a3c3c6667("perf/core: Fix child_total_time_enabled accounting
bug at task exit") moves the event->state update to before
list_del_event(). This makes the event->state test in list_del_event()
always false; never calling perf_cgroup_event_disable().
As a result, cpuctx->cgrp won't be cleared properly; causing havoc.
Fixes: a3c3c6667("perf/core: Fix child_total_time_enabled accounting bug at task exit")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/all/aD2TspKH%2F7yvfYoO@e129823.arm.com/
Stable-dep-of: 42c5ca1f0a28 ("perf/core: Fix group leader use-after-free after sibling detach")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Griffin Kroah-Hartman <griffin@kroah.com>
Date: Thu Jul 9 14:24:01 2026 +0200
rndis_host: add overflow check in rndis_rx_fixup()
commit 965a251f23ff69cfb4486974d4532e9bb551c7fc upstream.
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Shaoxu Liu <shaoxul@foxmail.com>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2026070900-denim-brook-52d4@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Sun Aug 23 14:04:18 2026 -0400
s390/vfio_ccw: Cancel existing workqueues
[ Upstream commit 79c60b2c61105368dcc8444eb45847e21734f7c4 ]
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: e5f84dbaea59 ("vfio: ccw: return I/O results asynchronously")
Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[ Inserted the two cancel_work_sync() calls before the memset/complete pair in 6.1's release_dev instead of upstream's destructor body, which doesn't exist here. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Tue Jul 28 05:30:13 2026 +0200
s390/vfio_ccw: Free all memory if cp_init() fails
[ Upstream commit 74186c2968f8f756ac3226b545b598457c910c75 ]
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic.
Fixes: 8b515be512a2 ("vfio-ccw: Fix memory leak and don't call cp_free in cp_init")
Cc: stable@vger.kernel.org
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Mon Aug 24 05:56:30 2026 -0400
s390/vfio_ccw: Implement a crw lock
[ Upstream commit 16b0798024c0e9117e395829ddbbe70981c79d9c ]
Unlike the channel_program struct, which covers synchronous I/O
submissions and asynchronous interrupts, the CRW region relies
exclusively on asynchronous events coming from hardware.
Implement a lock to manage the list of those payloads, to ensure
they are read cohesively.
Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[ Relocated the `spin_lock_init()` and CRW drain loop from `vfio_ccw_mdev_init_dev()`/`release_dev()` in ops.c to `vfio_ccw_alloc_private()`/`vfio_ccw_free_private()` in drv.c, and kept the 2-argument `eventfd_signal()` form. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Mon Aug 24 05:56:28 2026 -0400
s390/vfio_ccw: Move cp cleanup out of not operational
[ Upstream commit 0c11f61a876ed6fcca53d442ed3f33ea8362a0f9 ]
The fsm_notoper() routine is called when the device has been
lost, and is (by definition) no longer operational. Since this
can happen asynchronously from the normal behavior of the
driver, the cleanup may happen when holding other locks
in the calling sequence (notably, the cio subchannel lock).
Push the cleanup of the private->cp resources to a workqueue,
where it can be done out from under that lock sequence and
a future patch can safely manage the locking requirements.
Fixes: 204b394a23ad ("vfio/ccw: Move FSM open/close to MDEV open/close")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Stable-dep-of: 16b0798024c0 ("s390/vfio_ccw: Implement a crw lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Farman <farman@linux.ibm.com>
Date: Mon Aug 24 05:56:29 2026 -0400
s390/vfio_ccw: Selectively expand io_mutex
[ Upstream commit 34f4feff3e90bd09308fad0974e97113b23b812a ]
The io_mutex was defined to serialize the io_regions, but then has
also sort of been associated with the I/O themselves because of
the close relationship they share.
With the handful of races that are possible, the choices are either to:
A) expand the scope of io_mutex to close these remaining windows, or
B) reduce the scope of io_mutex to just io_region, and introduce a new
lock mechanism for the remaining I/O resources
This patch implements A, since B brings with it a lot more interactions
that would need to be tracked and kept in a correct hierarchy. It also
takes advantage of the workqueue element for cp_free() that now gets
called out of fsm_notoper(), which could be invoked out of an interrupt
context and thus cannot acquire a mutex itself.
Fixes: 4f76617378ee ("vfio-ccw: protect the I/O region")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Stable-dep-of: 16b0798024c0 ("s390/vfio_ccw: Implement a crw lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fan Wu <fanwu01@zju.edu.cn>
Date: Thu Aug 20 23:59:30 2026 -0400
serial: amba-pl011: synchronize DMA teardown
[ Upstream commit 440915499231e9db1c361aa45bb702e8fd3b4a32 ]
dmaengine_terminate_all() does not wait for a running callback, so the TX
callback can still touch the TX buffer after it is freed. The RX poll
timer reads the RX buffers without the port lock.
Switch to dmaengine_terminate_sync() and delete the RX timer before
freeing the buffers.
Fixes: ead76f329f77 ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-4-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ changed upstream's `timer_delete_sync()` deletion to match this tree's `del_timer_sync()` spelling at the old call site ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lech Perczak <lech.perczak@camlingroup.com>
Date: Fri Aug 21 10:49:31 2026 -0400
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
[ Upstream commit d2e8590fd1048c5c0dba160edc6a48ee8305a1f0 ]
Now that bit definition comments were cleaned up, convert bitmask
definitions to use BIT() macro for clarity.
Convert SC16IS7XX_IIR_ID_MASK to use GENMASK() macro -
- while at that, realign comments.
Compose SC16IS7XX_LSR_BRK_ERROR_MASK using aforementioned constants,
instead of open-coding it, and remove now unneeded comments.
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/8b45a01e-7cc5-4d53-b467-c6680bc51ef4@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luca Fresi <luca.fresi@bithiatec.com>
Date: Fri Aug 21 10:49:34 2026 -0400
serial: sc16is7xx: enable THRI before filling TX FIFO
[ Upstream commit 246ac114f485c2affb454240f3ea4fabfce22456 ]
sc16is7xx_handle_tx() currently requests the THRI enable only after it has
filled the TX FIFO. The request is asynchronous because the IER update is
performed later by reg_work.
The SC16IS7xx generates a THRI interrupt when the TX FIFO crosses its
trigger level. If the FIFO drains past that level before reg_work enables
THRI, the chip does not generate a new interrupt. Characters remain queued
indefinitely even though the hardware FIFO is empty.
This was observed on an SC16IS752 while both UART channels were active.
During the stall the software TX buffer remained non-empty while TXLVL
reported 64 bytes free, LSR reported THR and transmitter empty, IER had
THRI enabled, and IIR reported no interrupt pending.
Enable THRI synchronously before filling the FIFO so the threshold crossing
cannot be missed.
Fixes: cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop")
Cc: stable <stable@kernel.org>
Signed-off-by: Luca Fresi <luca.fresi@bithiatec.com>
Link: https://patch.msgid.link/20260721222404.204746-1-luca.fresi@bithiatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lech Perczak <lech.perczak@camlingroup.com>
Date: Fri Aug 21 10:49:30 2026 -0400
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
[ Upstream commit eccdb0fd1c340155666533f5c60c5229d370baab ]
Comments attached to bits 0 and 1 incorrectly referenced bits 2 and 3,
which don't match the datasheet - fix them.
At the same time remove comments for individual constants, as they add
nothing to the definitions themselves.
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/2986a485-935d-4ab2-9a16-4a85288aa15a@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Date: Fri Aug 21 10:49:32 2026 -0400
serial: sc16is7xx: rename EFR mutex with generic name
[ Upstream commit d9b2d7ddbb973b981c20b21e9228581bb156f66f ]
This mutex is used as a lock when accessing registers that share the same
address space, not necessarily EFR registers.
For example, address 0x06 is shared by MSR, TCR and XOFF1 registers,
independently of EFR.
Rename the mutex with a more generic name to avoid misinterpreting its
usage.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Date: Fri Aug 21 10:49:33 2026 -0400
serial: sc16is7xx: use guards for simple mutex locks
[ Upstream commit 0f4f88bfd7e7bf3f3293045fffdc63586b0a889f ]
Guards can help to make the code more readable, so use them wherever they
do so.
In sc16is7xx_port_irq(), labels and 'rc' locals are eliminated completely.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sabrina Dubroca <sd@queasysnail.net>
Date: Wed Apr 24 12:25:47 2024 +0200
tls: fix lockless read of strp->msg_ready in ->poll
commit 0844370f8945086eb9335739d10205dcea8d707b upstream.
tls_sk_poll is called without locking the socket, and needs to read
strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool
and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are
only performed when the socket is locked.
Fixes: 121dca784fc0 ("tls: suppress wakeups unless we have a full record")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/0b7ee062319037cf86af6b317b3d72f7bfcd2e97.1713797701.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 0844370f8945 ("tls: fix lockless read of strp->msg_ready in ->poll")
Assisted-by: Codex:GPT-5
Signed-off-by: Artem Dinaburg <artem@trailofbits.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Thu Aug 7 16:29:06 2025 -0700
tls: handle data disappearing from under the TLS ULP
commit 6db015fc4b5d5f63a64a193f65d98da3a7fc811d upstream.
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://lore.kernel.org/tFjq_kf7sWIG3A7CrCg_egb8CVsT_gsmHAK0_wxDPJXfIzxFAMxqmLwp3MlU5EHiet0AwwJldaaFdgyHpeIUCS-3m3llsmRzp9xIOBR4lAI=@syst3mfailure.io
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Assisted-by: Codex:GPT-5
Signed-off-by: Artem Dinaburg <artem@trailofbits.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xiang Mei (Microsoft) <xmei5@asu.edu>
Date: Sat Jun 27 02:40:23 2026 +0000
xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
[ Upstream commit c283e9ada7fcb7dd4b10592623086b2e6d2f9925 ]
xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(),
i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with
rcu_dereference_protected(), stores NULL and dst_release()s the old dst.
That is only safe if no other thread modifies sk_dst_cache concurrently.
For a connected UDP socket that does not hold: the transmit fast path
(udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly
with an atomic xchg(). A per-socket policy change racing a send can make
both sides observe the same old dst and each dst_release() it, dropping
the socket's single reference twice and freeing the xfrm_dst bundle while
it is still referenced:
BUG: KASAN: slab-use-after-free in dst_release
Write of size 4 at addr ffff88801897b6c0 by task exploit/155
Call Trace:
...
dst_release (... ./include/linux/rcuref.h:109)
xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053)
do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347)
ip_setsockopt (net/ipv4/ip_sockglue.c:1417)
do_sock_setsockopt (net/socket.c:2368)
__sys_setsockopt (net/socket.c:2393)
__x64_sys_setsockopt (net/socket.c:2396)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Reachable by an unprivileged user via a user+network namespace.
Use the atomic sk_dst_reset() so the cache is cleared and released with a
single xchg(): whichever side wins releases the dst once, the other sees
NULL and does nothing. Behaviour is otherwise unchanged.
Fixes: 2b06cdf3e688 ("xfrm: Clear sk_dst_cache when applying per-socket policy.")
Fixes: be8f8284cd89 ("net: xfrm: allow clearing socket xfrm policies.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ibrahim Hashimov <security@auditcode.ai>
Date: Mon Aug 24 05:56:50 2026 -0400
xfs: bounds-check buffer log item's dirty bitmap
[ Upstream commit 813f8136a2ce1fee266d02a7df73db6e8a541604 ]
xlog_recover_do_reg_buffer() replays each dirty region described by a
buffer log item's bitmap into the buffer read for that item:
memcpy(xfs_buf_offset(bp, (uint)bit << XFS_BLF_SHIFT),
item->ri_buf[i].iov_base,
nbits << XFS_BLF_SHIFT);
The destination offset (bit/nbits, from the logged dirty bitmap) and the
buffer size (from the logged blf_len) are both attacker-controlled and
otherwise unrelated, yet the only thing bounding the copy is an ASSERT(),
which compiles away on production kernels. A crafted image logging a
small blf_len together with a bitmap bit past the end of that buffer
drives the memcpy() past the buffer's allocation, corrupting adjacent
kernel heap during mount-time log recovery. This is reachable by anyone
who can get a crafted image mounted -- the malicious-filesystem threat
model XFS already guards against elsewhere.
Turn the ASSERT() into a real XFS_IS_CORRUPT() check that aborts recovery
of the buffer with -EFSCORRUPTED, consistent with the validate-and-fail
idiom already used in xlog_recover_do_inode_buffer() and
xfs_dquot_item_recover.c. xlog_recover_do_reg_buffer() therefore becomes
STATIC int and its three callers propagate the error.
Found and confirmed with KASAN on a CONFIG_XFS_DEBUG=n build: the crafted
image trips a slab-out-of-bounds write before this change and fails
recovery cleanly with -EFSCORRUPTED after it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ dropped the `xlog_recover_do_primary_sb_buffer()` error-propagation hunk and its primary-SB/rtsb arm since that helper doesn't exist, keeping only the `error = 0;` reset ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christoph Hellwig <hch@lst.de>
Date: Mon Aug 24 05:56:49 2026 -0400
xfs: don't use a xfs_log_iovec for ri_buf in log recovery
[ Upstream commit ded74fddcaf685a9440c5612f7831d0c4c1473ca ]
ri_buf just holds a pointer/len pair and is not a log iovec used for
writing to the log. Switch to use a kvec instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Stable-dep-of: 813f8136a2ce ("xfs: bounds-check buffer log item's dirty bitmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hongling Zeng <zenghongling@kylinos.cn>
Date: Tue Jul 28 15:43:40 2026 +0800
xfs: validate attr entry pointer before field access
commit b7eea80be25f3334f131d52982b3131aba77b97d upstream.
xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen,
valuelen) before checking if the entry pointer itself is within bounds.
If nameidx is crafted to point near the end of the buffer, these field
accesses can read out-of-bounds before the bounds check at
name_end > buf_end is performed.
Add explicit bounds checks for entry pointers before accessing their
fields. Use offsetof() to check that the start of the flexible array
member (nameval/name) is within bounds, which ensures all preceding
fields are safe to access.
Fixes: c84760659dcf2 ("xfs: check attribute leaf block structure")
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>