Author: Seiji Nishikawa <snishika@redhat.com>
Date: Sun Aug 25 23:13:52 2024 +0900
ACPI: PAD: fix crash in exit_round_robin()
commit 0a2ed70a549e61c5181bad5db418d223b68ae932 upstream.
The kernel occasionally crashes in cpumask_clear_cpu(), which is called
within exit_round_robin(), because when executing clear_bit(nr, addr) with
nr set to 0xffffffff, the address calculation may cause misalignment within
the memory, leading to access to an invalid memory address.
----------
BUG: unable to handle kernel paging request at ffffffffe0740618
...
CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1
...
RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad]
Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31
RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8
R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e
R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e
FS: 0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? acpi_pad_add+0x120/0x120 [acpi_pad]
kthread+0x10b/0x130
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x40
...
CR2: ffffffffe0740618
crash> dis -lr ffffffffc0726923
...
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114
0xffffffffc0726918 <power_saving_thread+776>: mov %r12d,%r12d
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325
0xffffffffc072691b <power_saving_thread+779>: mov -0x3f8d7de0(,%r12,4),%eax
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80
0xffffffffc0726923 <power_saving_thread+787>: lock btr %rax,0x19cf4(%rip) # 0xffffffffc0740620 <pad_busy_cpus_bits>
crash> px tsk_in_cpu[14]
$66 = 0xffffffff
crash> px 0xffffffffc072692c+0x19cf4
$99 = 0xffffffffc0740620
crash> sym 0xffffffffc0740620
ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad]
crash> px pad_busy_cpus_bits[0]
$42 = 0xfffc0
----------
To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling
cpumask_clear_cpu() in exit_round_robin(), just as it is done in
round_robin_cpu().
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Link: https://patch.msgid.link/20240825141352.25280-1-snishika@redhat.com
[ rjw: Subject edit, avoid updates to the same value ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed Jun 18 14:17:45 2025 +0200
ACPICA: Refuse to evaluate a method if arguments are missing
[ Upstream commit 6fcab2791543924d438e7fa49276d0998b0a069f ]
As reported in [1], a platform firmware update that increased the number
of method parameters and forgot to update a least one of its callers,
caused ACPICA to crash due to use-after-free.
Since this a result of a clear AML issue that arguably cannot be fixed
up by the interpreter (it cannot produce missing data out of thin air),
address it by making ACPICA refuse to evaluate a method if the caller
attempts to pass fewer arguments than expected to it.
Closes: https://github.com/acpica/acpica/issues/1027 [1]
Reported-by: Peter Williams <peter@newton.cx>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Tested-by: Hans de Goede <hansg@kernel.org> # Dell XPS 9640 with BIOS 1.12.0
Link: https://patch.msgid.link/5909446.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cezary Rojewski <cezary.rojewski@intel.com>
Date: Fri May 30 16:13:09 2025 +0200
ALSA: hda: Ignore unsol events for cards being shut down
[ Upstream commit 3f100f524e75586537e337b34d18c8d604b398e7 ]
For the classic snd_hda_intel driver, codec->card and bus->card point to
the exact same thing. When snd_card_diconnect() fires, bus->shutdown is
set thanks to azx_dev_disconnect(). card->shutdown is already set when
that happens but both provide basically the same functionality.
For the DSP snd_soc_avs driver where multiple codecs are located on
multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec
card may be unregistered while other codecs are still operational.
Proper check in form of card->shutdown must be used to verify whether
the codec's card is being shut down.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Tue Jun 10 08:43:20 2025 +0200
ALSA: sb: Force to disable DMAs once when DMA mode is changed
[ Upstream commit 4c267ae2ef349639b4d9ebf00dd28586a82fdbe6 ]
When the DMA mode is changed on the (still real!) SB AWE32 after
playing a stream and closing, the previous DMA setup was still
silently kept, and it can confuse the hardware, resulting in the
unexpected noises. As a workaround, enforce the disablement of DMA
setups when the DMA setup is changed by the kcontrol.
https://bugzilla.kernel.org/show_bug.cgi?id=218185
Link: https://patch.msgid.link/20250610064322.26787-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Youngjun Lee <yjjuny.lee@samsung.com>
Date: Mon Jun 23 20:05:25 2025 +0900
ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()
[ Upstream commit fb4e2a6e8f28a3c0ad382e363aeb9cd822007b8a ]
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Raju Rangoju <Raju.Rangoju@amd.com>
Date: Tue Jul 1 00:56:36 2025 +0530
amd-xgbe: align CL37 AN sequence as per databook
[ Upstream commit 42fd432fe6d320323215ebdf4de4d0d7e56e6792 ]
Update the Clause 37 Auto-Negotiation implementation to properly align
with the PCS hardware specifications:
- Fix incorrect bit settings in Link Status and Link Duplex fields
- Implement missing sequence steps 2 and 7
These changes ensure CL37 auto-negotiation protocol follows the exact
sequence patterns as specified in the hardware databook.
Fixes: 1bf40ada6290 ("amd-xgbe: Add support for clause 37 auto-negotiation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dev Jain <dev.jain@arm.com>
Date: Tue May 27 13:56:33 2025 +0530
arm64: Restrict pagetable teardown to avoid false warning
commit 650768c512faba8070bf4cfbb28c95eb5cd203f3 upstream.
Commit 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from
pXd_free_pYd_table()") removes the pxd_present() checks because the
caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the
caller only checks pud_present(); pud_free_pmd_page() recurses on each
pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is
possible to hit a warning in the latter, since pmd_none => !pmd_table().
Thus, add a pmd_present() check in pud_free_pmd_page().
This problem was found by code inspection.
Fixes: 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()")
Cc: stable@vger.kernel.org
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250527082633.61073-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sat Apr 19 23:34:48 2025 +0200
ASoC: meson: meson-card-utils: use of_property_present() for DT parsing
[ Upstream commit 171eb6f71e9e3ba6a7410a1d93f3ac213f39dae2 ]
Commit c141ecc3cecd ("of: Warn when of_property_read_bool() is used on
non-boolean properties") added a warning when trying to parse a property
with a value (boolean properties are defined as: absent = false, present
without any value = true). This causes a warning from meson-card-utils.
meson-card-utils needs to know about the existence of the
"audio-routing" and/or "audio-widgets" properties in order to properly
parse them. Switch to of_property_present() in order to silence the
following warning messages during boot:
OF: /sound: Read of boolean property 'audio-routing' with a value.
OF: /sound: Read of boolean property 'audio-widgets' with a value.
Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250419213448.59647-1-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Fri Jun 6 11:01:11 2025 +0200
ata: pata_cs5536: fix build on 32-bit UML
[ Upstream commit fe5b391fc56f77cf3c22a9dd4f0ce20db0e3533f ]
On 32-bit ARCH=um, CONFIG_X86_32 is still defined, so it
doesn't indicate building on real X86 machines. There's
no MSR on UML though, so add a check for CONFIG_X86.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20250606090110.15784-2-johannes@sipsolutions.net
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Fri Jul 4 06:23:53 2025 +0000
atm: clip: Fix infinite recursive call of clip_push().
[ Upstream commit c489f3283dbfc0f3c00c312149cae90d27552c45 ]
syzbot reported the splat below. [0]
This happens if we call ioctl(ATMARP_MKIP) more than once.
During the first call, clip_mkip() sets clip_push() to vcc->push(),
and the second call copies it to clip_vcc->old_push().
Later, when the socket is close()d, vcc_destroy_socket() passes
NULL skb to clip_push(), which calls clip_vcc->old_push(),
triggering the infinite recursion.
Let's prevent the second ioctl(ATMARP_MKIP) by checking
vcc->user_back, which is allocated by the first call as clip_vcc.
Note also that we use lock_sock() to prevent racy calls.
[0]:
BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000)
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191
Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00
RSP: 0018:ffffc9000d670000 EFLAGS: 00010246
RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000
RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e
R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300
R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578
FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0
Call Trace:
<TASK>
clip_push+0x6dc/0x720 net/atm/clip.c:200
clip_push+0x6dc/0x720 net/atm/clip.c:200
clip_push+0x6dc/0x720 net/atm/clip.c:200
...
clip_push+0x6dc/0x720 net/atm/clip.c:200
clip_push+0x6dc/0x720 net/atm/clip.c:200
clip_push+0x6dc/0x720 net/atm/clip.c:200
vcc_destroy_socket net/atm/common.c:183 [inline]
vcc_release+0x157/0x460 net/atm/common.c:205
__sock_release net/socket.c:647 [inline]
sock_close+0xc0/0x240 net/socket.c:1391
__fput+0x449/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114
exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline]
do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff31c98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f
R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c
R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090
</TASK>
Modules linked in:
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+0c77cccd6b7cd917b35a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2371d94d248d126c1eb1
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250704062416.1613927-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Fri Jul 4 06:23:52 2025 +0000
atm: clip: Fix memory leak of struct clip_vcc.
[ Upstream commit 62dba28275a9a3104d4e33595c7b3328d4032d8d ]
ioctl(ATMARP_MKIP) allocates struct clip_vcc and set it to
vcc->user_back.
The code assumes that vcc_destroy_socket() passes NULL skb
to vcc->push() when the socket is close()d, and then clip_push()
frees clip_vcc.
However, ioctl(ATMARPD_CTRL) sets NULL to vcc->push() in
atm_init_atmarp(), resulting in memory leak.
Let's serialise two ioctl() by lock_sock() and check vcc->push()
in atm_init_atmarp() to prevent memleak.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250704062416.1613927-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yue Haibing <yuehaibing@huawei.com>
Date: Sat Jul 5 16:52:28 2025 +0800
atm: clip: Fix NULL pointer dereference in vcc_sendmsg()
[ Upstream commit 22fc46cea91df3dce140a7dc6847c6fcf0354505 ]
atmarpd_dev_ops does not implement the send method, which may cause crash
as bellow.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0010 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246
RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000
RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000
RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287
R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00
R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88
FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
____sys_sendmsg+0x52d/0x830 net/socket.c:2566
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620
__sys_sendmmsg+0x227/0x430 net/socket.c:2709
__do_sys_sendmmsg net/socket.c:2736 [inline]
__se_sys_sendmmsg net/socket.c:2733 [inline]
__x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+e34e5e6b5eddb0014def@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/682f82d5.a70a0220.1765ec.0143.GAE@google.com/T
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250705085228.329202-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Fri Jul 4 06:23:51 2025 +0000
atm: clip: Fix potential null-ptr-deref in to_atmarpd().
[ Upstream commit 706cc36477139c1616a9b2b96610a8bb520b7119 ]
atmarpd is protected by RTNL since commit f3a0592b37b8 ("[ATM]: clip
causes unregister hang").
However, it is not enough because to_atmarpd() is called without RTNL,
especially clip_neigh_solicit() / neigh_ops->solicit() is unsleepable.
Also, there is no RTNL dependency around atmarpd.
Let's use a private mutex and RCU to protect access to atmarpd in
to_atmarpd().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250704062416.1613927-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Tue Jun 24 08:41:47 2025 +0200
atm: idt77252: Add missing `dma_map_error()`
[ Upstream commit c4890963350dcf4e9a909bae23665921fba4ad27 ]
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250624064148.12815-3-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Tue Jun 24 14:45:00 2025 -0700
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
[ Upstream commit a433791aeaea6e84df709e0b9584b9bbe040cd1c ]
syzbot reported a warning below during atm_dev_register(). [0]
Before creating a new device and procfs/sysfs for it, atm_dev_register()
looks up a duplicated device by __atm_dev_lookup(). These operations are
done under atm_dev_mutex.
However, when removing a device in atm_dev_deregister(), it releases the
mutex just after removing the device from the list that __atm_dev_lookup()
iterates over.
So, there will be a small race window where the device does not exist on
the device list but procfs/sysfs are still not removed, triggering the
splat.
Let's hold the mutex until procfs/sysfs are removed in
atm_dev_deregister().
[0]:
proc_dir_entry 'atm/atmtcp:0' already registered
WARNING: CPU: 0 PID: 5919 at fs/proc/generic.c:377 proc_register+0x455/0x5f0 fs/proc/generic.c:377
Modules linked in:
CPU: 0 UID: 0 PID: 5919 Comm: syz-executor284 Not tainted 6.16.0-rc2-syzkaller-00047-g52da431bf03b #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
RIP: 0010:proc_register+0x455/0x5f0 fs/proc/generic.c:377
Code: 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 a2 01 00 00 48 8b 44 24 10 48 c7 c7 20 c0 c2 8b 48 8b b0 d8 00 00 00 e8 0c 02 1c ff 90 <0f> 0b 90 90 48 c7 c7 80 f2 82 8e e8 0b de 23 09 48 8b 4c 24 28 48
RSP: 0018:ffffc9000466fa30 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817ae248
RDX: ffff888026280000 RSI: ffffffff817ae255 RDI: 0000000000000001
RBP: ffff8880232bed48 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888076ed2140
R13: dffffc0000000000 R14: ffff888078a61340 R15: ffffed100edda444
FS: 00007f38b3b0c6c0(0000) GS:ffff888124753000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f38b3bdf953 CR3: 0000000076d58000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
proc_create_data+0xbe/0x110 fs/proc/generic.c:585
atm_proc_dev_register+0x112/0x1e0 net/atm/proc.c:361
atm_dev_register+0x46d/0x890 net/atm/resources.c:113
atmtcp_create+0x77/0x210 drivers/atm/atmtcp.c:369
atmtcp_attach drivers/atm/atmtcp.c:403 [inline]
atmtcp_ioctl+0x2f9/0xd60 drivers/atm/atmtcp.c:464
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x115/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f38b3b74459
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f38b3b0c198 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f38b3bfe318 RCX: 00007f38b3b74459
RDX: 0000000000000000 RSI: 0000000000006180 RDI: 0000000000000005
RBP: 00007f38b3bfe310 R08: 65732f636f72702f R09: 65732f636f72702f
R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f38b3bcb0ac
R13: 00007f38b3b0c1a0 R14: 0000200000000200 R15: 00007f38b3bcb03b
</TASK>
Fixes: 64bf69ddff76 ("[ATM]: deregistration removes device from atm_devs list immediately")
Reported-by: syzbot+8bd335d2ad3b93e80715@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/685316de.050a0220.216029.0087.GAE@google.com/
Tested-by: syzbot+8bd335d2ad3b93e80715@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250624214505.570679-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun Jun 22 18:03:29 2025 -0400
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
[ Upstream commit ce7df19686530920f2f6b636e71ce5eb1d9303ef ]
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Frédéric Danis <frederic.danis@collabora.com>
Date: Thu Jun 12 09:50:34 2025 +0200
Bluetooth: L2CAP: Fix L2CAP MTU negotiation
commit 042bb9603c44620dce98717a2d23235ca57a00d7 upstream.
OBEX download from iPhone is currently slow due to small packet size
used to transfer data which doesn't follow the MTU negotiated during
L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 4103 (0x1007)
Source CID: 72
> ACL Data RX: Handle 11 flags 0x02 dlen 16
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 14608
Source CID: 72
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 20 len 19
Destination CID: 14608
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 72 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 72 len 21
Source CID: 14608
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 20 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags 0x00 dlen 13
Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3
The MTUs are negotiated for each direction. In this traces 32767 for
iPhone->localhost and no MTU for localhost->iPhone, which based on
'4.4 L2CAP_CONFIGURATION_REQ' (Core specification v5.4, Vol. 3, Part
A):
The only parameters that should be included in the
L2CAP_CONFIGURATION_REQ packet are those that require different
values than the default or previously agreed values.
...
Any missing configuration parameters are assumed to have their
most recently explicitly or implicitly accepted values.
and '5.1 Maximum transmission unit (MTU)':
If the remote device sends a positive L2CAP_CONFIGURATION_RSP
packet it should include the actual MTU to be used on this channel
for traffic flowing into the local device.
...
The default value is 672 octets.
is set by BlueZ to 672 bytes.
It seems that the iPhone used the lowest negotiated value to transfer
data to the localhost instead of the negotiated one for the incoming
direction.
This could be fixed by using the MTU negotiated for the other
direction, if exists, in the L2CAP_CONFIGURATION_RSP.
This allows to use segmented packets as in the following traces:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 22 len 4
PSM: 4103 (0x1007)
Source CID: 72
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 24 len 19
Destination CID: 2832
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 15 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 15 len 21
Source CID: 2832
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 24 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0x4202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Start (len 21884) TxSeq 1 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0xc204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Continuation TxSeq 2 ReqSeq 2
This has been tested with kernel 5.4 and BlueZ 5.77.
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shravya KN <shravya.k-n@broadcom.com>
Date: Thu Jul 10 14:39:36 2025 -0700
bnxt_en: Fix DCB ETS validation
[ Upstream commit b74c2a2e9cc471e847abd87e50a2354c07e02040 ]
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Somnath Kotur <somnath.kotur@broadcom.com>
Date: Thu Jul 10 14:39:38 2025 -0700
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
[ Upstream commit 3cdf199d4755d477972ee87110b2aebc88b3cfad ]
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en]
Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Wed Apr 29 12:45:13 2020 +0900
bpfilter: match bit size of bpfilter_umh to that of the kernel
[ Upstream commit 9371f86ecb60f6f1f120e3d93fe892bbb70d04c0 ]
bpfilter_umh is built for the default machine bit of the compiler,
which may not match to the bit size of the kernel.
This happens in the scenario below:
You can use biarch GCC that defaults to 64-bit for building the 32-bit
kernel. In this case, Kbuild passes -m32 to teach the compiler to
produce 32-bit kernel space objects. However, it is missing when
building bpfilter_umh. It is built as a 64-bit ELF, and then embedded
into the 32-bit kernel.
The 32-bit kernel and 64-bit umh is a bad combination.
In theory, we can have 32-bit umh running on 64-bit kernel, but we do
not have a good reason to support such a usecase.
The best is to match the bit size between them.
Pass -m32 or -m64 to the umh build command if it is found in
$(KBUILD_CFLAGS). Evaluate CC_CAN_LINK against the kernel bit-size.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: 02e9a22ceef0 ("kbuild: hdrcheck: fix cross build with clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Omar Sandoval <osandov@fb.com>
Date: Thu Jan 4 11:48:46 2024 -0800
btrfs: don't abort filesystem when attempting to snapshot deleted subvolume
commit 7081929ab2572920e94d70be3d332e5c9f97095a upstream.
If the source file descriptor to the snapshot ioctl refers to a deleted
subvolume, we get the following abort:
BTRFS: Transaction aborted (error -2)
WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs]
Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c
CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs]
RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027
RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840
RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998
R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe
R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80
FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0
Call Trace:
<TASK>
? create_pending_snapshot+0x1040/0x1190 [btrfs]
? __warn+0x81/0x130
? create_pending_snapshot+0x1040/0x1190 [btrfs]
? report_bug+0x171/0x1a0
? handle_bug+0x3a/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? create_pending_snapshot+0x1040/0x1190 [btrfs]
? create_pending_snapshot+0x1040/0x1190 [btrfs]
create_pending_snapshots+0x92/0xc0 [btrfs]
btrfs_commit_transaction+0x66b/0xf40 [btrfs]
btrfs_mksubvol+0x301/0x4d0 [btrfs]
btrfs_mksnapshot+0x80/0xb0 [btrfs]
__btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs]
btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs]
btrfs_ioctl+0x8a6/0x2650 [btrfs]
? kmem_cache_free+0x22/0x340
? do_sys_openat2+0x97/0xe0
__x64_sys_ioctl+0x97/0xd0
do_syscall_64+0x46/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7fe20abe83af
RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af
RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry
BTRFS info (device vdc: state EA): forced readonly
BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction.
BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry
This happens because create_pending_snapshot() initializes the new root
item as a copy of the source root item. This includes the refs field,
which is 0 for a deleted subvolume. The call to btrfs_insert_root()
therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then
finds the root and returns -ENOENT if refs == 0, which causes
create_pending_snapshot() to abort.
Fix it by checking the source root's refs before attempting the
snapshot, but after locking subvol_sem to avoid racing with deletion.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ Larry: backport to 5.4.y. Minor conflict resolved due to missing commit 92a7cc425223
btrfs: rename BTRFS_ROOT_REF_COWS to BTRFS_ROOT_SHAREABLE ]
Signed-off-by: Larry Bassel <larry.bassel@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Wed Jun 18 16:57:07 2025 +0100
btrfs: fix missing error handling when searching for inode refs during log replay
[ Upstream commit 6561a40ceced9082f50c374a22d5966cf9fc5f5c ]
During log replay, at __add_inode_ref(), when we are searching for inode
ref keys we totally ignore if btrfs_search_slot() returns an error. This
may make a log replay succeed when there was an actual error and leave
some metadata inconsistency in a subvolume tree. Fix this by checking if
an error was returned from btrfs_search_slot() and if so, return it to
the caller.
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Fri Jun 20 15:54:05 2025 +0100
btrfs: propagate last_unlink_trans earlier when doing a rmdir
[ Upstream commit c466e33e729a0ee017d10d919cba18f503853c60 ]
In case the removed directory had a snapshot that was deleted, we are
propagating its inode's last_unlink_trans to the parent directory after
we removed the entry from the parent directory. This leaves a small race
window where someone can log the parent directory after we removed the
entry and before we updated last_unlink_trans, and as a result if we ever
try to replay such a log tree, we will fail since we will attempt to
remove a snapshot during log replay, which is currently not possible and
results in the log replay (and mount) to fail. This is the type of failure
described in commit 1ec9a1ae1e30 ("Btrfs: fix unreplayable log after
snapshot delete + parent dir fsync").
So fix this by propagating the last_unlink_trans to the parent directory
before we remove the entry from it.
Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Fri Jun 20 16:37:01 2025 +0100
btrfs: use btrfs_record_snapshot_destroy() during rmdir
[ Upstream commit 157501b0469969fc1ba53add5049575aadd79d80 ]
We are setting the parent directory's last_unlink_trans directly which
may result in a concurrent task starting to log the directory not see the
update and therefore can log the directory after we removed a child
directory which had a snapshot within instead of falling back to a
transaction commit. Replaying such a log tree would result in a mount
failure since we can't currently delete snapshots (and subvolumes) during
log replay. This is the type of failure described in commit 1ec9a1ae1e30
("Btrfs: fix unreplayable log after snapshot delete + parent dir fsync").
Fix this by using btrfs_record_snapshot_destroy() which updates the
last_unlink_trans field while holding the inode's log_mutex lock.
Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Nyekjaer <sean@geanix.com>
Date: Fri Jul 11 12:12:02 2025 +0200
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
[ Upstream commit 58805e9cbc6f6a28f35d90e740956e983a0e036e ]
Downgrade the "msg lost in rx" message to debug level, to prevent
flooding the kernel log with error messages.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250711-mcan_ratelimit-v3-1-7413e8e21b84@geanix.com
[mkl: enhance commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Kandybka <d.kandybka@gmail.com>
Date: Tue Apr 22 12:32:04 2025 +0300
ceph: fix possible integer overflow in ceph_zero_objects()
[ Upstream commit 0abd87942e0c93964e93224836944712feba1d91 ]
In 'ceph_zero_objects', promote 'object_size' to 'u64' to avoid possible
integer overflow.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pali Rohár <pali@kernel.org>
Date: Tue Dec 31 16:06:22 2024 +0100
cifs: Fix cifs_query_path_info() for Windows NT servers
[ Upstream commit a3e771afbb3bce91c8296828304903e7348003fe ]
For TRANS2 QUERY_PATH_INFO request when the path does not exist, the
Windows NT SMB server returns error response STATUS_OBJECT_NAME_NOT_FOUND
or ERRDOS/ERRbadfile without the SMBFLG_RESPONSE flag set. Similarly it
returns STATUS_DELETE_PENDING when the file is being deleted. And looks
like that any error response from TRANS2 QUERY_PATH_INFO does not have
SMBFLG_RESPONSE flag set.
So relax check in check_smb_hdr() for detecting if the packet is response
for this special case.
This change fixes stat() operation against Windows NT SMB servers and also
all operations which depends on -ENOENT result from stat like creat() or
mkdir().
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Heinz Mauelshagen <heinzm@redhat.com>
Date: Tue Jun 10 20:53:30 2025 +0200
dm-raid: fix variable in journal device check
commit db53805156f1e0aa6d059c0d3f9ac660d4ef3eb4 upstream.
Replace "rdev" with correct loop variable name "r".
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 63c32ed4afc2 ("dm raid: add raid4/5/6 journaling support")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christian König <christian.koenig@amd.com>
Date: Tue Jan 28 10:47:48 2025 +0100
dma-buf: fix timeout handling in dma_resv_wait_timeout v2
[ Upstream commit 2b95a7db6e0f75587bffddbb490399cbb87e4985 ]
Even the kerneldoc says that with a zero timeout the function should not
wait for anything, but still return 1 to indicate that the fences are
signaled now.
Unfortunately that isn't what was implemented, instead of only returning
1 we also waited for at least one jiffies.
Fix that by adjusting the handling to what the function is actually
documented to do.
v2: improve code readability
Reported-by: Marek Olšák <marek.olsak@amd.com>
Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250129105841.1806-1-christian.koenig@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Gessler <thomas.gessler@brueckmann-gmbh.de>
Date: Wed May 7 20:21:01 2025 +0200
dmaengine: xilinx_dma: Set dma_device directions
[ Upstream commit 7e01511443c30a55a5ae78d3debd46d4d872517e ]
Coalesce the direction bits from the enabled TX and/or RX channels into
the directions bit mask of dma_device. Without this mask set,
dma_get_slave_caps() in the DMAEngine fails, which prevents the driver
from being used with an IIO DMAEngine buffer.
Signed-off-by: Thomas Gessler <thomas.gessler@brueckmann-gmbh.de>
Reviewed-by: Suraj Gupta <suraj.gupta2@amd.com>
Tested-by: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://lore.kernel.org/r/20250507182101.909010-1-thomas.gessler@brueckmann-gmbh.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fushuai Wang <wangfushuai@baidu.com>
Date: Thu Jun 26 21:30:03 2025 +0800
dpaa2-eth: fix xdp_rxq_info leak
[ Upstream commit 2def09ead4ad5907988b655d1e1454003aaf8297 ]
The driver registered xdp_rxq_info structures via xdp_rxq_info_reg()
but failed to properly unregister them in error paths and during
removal.
Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20250626133003.80136-1-wangfushuai@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aradhya Bhatia <a-bhatia1@ti.com>
Date: Sat Mar 29 17:09:15 2025 +0530
drm/bridge: cdns-dsi: Check return value when getting default PHY config
commit c6a7ef0d4856b9629df390e9935d7fd67fe39f81 upstream.
Check for the return value of the phy_mipi_dphy_get_default_config()
call, and in case of an error, return back the same.
Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-5-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Aradhya Bhatia <a-bhatia1@ti.com>
Date: Sat Mar 29 17:09:12 2025 +0530
drm/bridge: cdns-dsi: Fix connecting to next bridge
commit 688eb4d465484bc2a3471a6a6f06f833b58c7867 upstream.
Fix the OF node pointer passed to the of_drm_find_bridge() call to find
the next bridge in the display chain.
The code to find the next panel (and create its panel-bridge) works
fine, but to find the next (non-panel) bridge does not.
To find the next bridge in the pipeline, we need to pass "np" - the OF
node pointer of the next entity in the devicetree chain. Passing
"of_node" to of_drm_find_bridge (which is what the code does currently)
will fetch the bridge for the cdns-dsi which is not what's required.
Fix that.
Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-2-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Aradhya Bhatia <a-bhatia1@ti.com>
Date: Sat Mar 29 17:09:14 2025 +0530
drm/bridge: cdns-dsi: Fix the clock variable for mode_valid()
commit 132bdcec399be6ae947582249a134b38cf56731c upstream.
The crtc_* mode parameters do not get generated (duplicated in this
case) from the regular parameters before the mode validation phase
begins.
The rest of the code conditionally uses the crtc_* parameters only
during the bridge enable phase, but sticks to the regular parameters
for mode validation. In this singular instance, however, the driver
tries to use the crtc_clock parameter even during the mode validation,
causing the validation to fail.
Allow the D-Phy config checks to use mode->clock instead of
mode->crtc_clock during mode_valid checks, like everywhere else in the
driver.
Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-4-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kaustabh Chakraborty <kauschluss@disroot.org>
Date: Fri Jun 27 00:50:30 2025 +0530
drm/exynos: exynos7_drm_decon: add vblank check in IRQ handling
commit b846350aa272de99bf6fecfa6b08e64ebfb13173 upstream.
If there's support for another console device (such as a TTY serial),
the kernel occasionally panics during boot. The panic message and a
relevant snippet of the call stack is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000
Call trace:
drm_crtc_handle_vblank+0x10/0x30 (P)
decon_irq_handler+0x88/0xb4
[...]
Otherwise, the panics don't happen. This indicates that it's some sort
of race condition.
Add a check to validate if the drm device can handle vblanks before
calling drm_crtc_handle_vblank() to avoid this.
Cc: stable@vger.kernel.org
Fixes: 96976c3d9aff ("drm/exynos: Add DECON driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed Jun 18 14:06:26 2025 +0200
drm/exynos: fimd: Guard display clock control with runtime PM calls
[ Upstream commit 5d91394f236167ac624b823820faf4aa928b889e ]
Commit c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable
and post-disable") changed the call sequence to the CRTC enable/disable
and bridge pre_enable/post_disable methods, so those bridge methods are
now called when CRTC is not yet enabled.
This causes a lockup observed on Samsung Peach-Pit/Pi Chromebooks. The
source of this lockup is a call to fimd_dp_clock_enable() function, when
FIMD device is not yet runtime resumed. It worked before the mentioned
commit only because the CRTC implemented by the FIMD driver was always
enabled what guaranteed the FIMD device to be runtime resumed.
This patch adds runtime PM guards to the fimd_dp_clock_enable() function
to enable its proper operation also when the CRTC implemented by FIMD is
not yet enabled.
Fixes: 196e059a8a6a ("drm/exynos: convert clock_enable crtc callback to pipeline clock")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Date: Mon Jul 7 16:34:40 2025 -0400
drm/i915/gt: Fix timeline left held on VMA alloc error
[ Upstream commit a5aa7bc1fca78c7fa127d9e33aa94a0c9066c1d6 ]
The following error has been reported sporadically by CI when a test
unbinds the i915 driver on a ring submission platform:
<4> [239.330153] ------------[ cut here ]------------
<4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count)
<4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330942] Call Trace:
<4> [239.330944] <TASK>
<4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915]
<4> [239.331202] i915_driver_release+0x86/0xa0 [i915]
<4> [239.331482] devm_drm_dev_init_release+0x61/0x90
<4> [239.331494] devm_action_release+0x15/0x30
<4> [239.331504] release_nodes+0x3d/0x120
<4> [239.331517] devres_release_all+0x96/0xd0
<4> [239.331533] device_unbind_cleanup+0x12/0x80
<4> [239.331543] device_release_driver_internal+0x23a/0x280
<4> [239.331550] ? bus_find_device+0xa5/0xe0
<4> [239.331563] device_driver_detach+0x14/0x20
...
<4> [357.719679] ---[ end trace 0000000000000000 ]---
If the test also unloads the i915 module then that's followed with:
<3> [357.787478] =============================================================================
<3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown()
<3> [357.788031] -----------------------------------------------------------------------------
<3> [357.788204] Object 0xffff888109e7f480 @offset=29824
<3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244
<4> [357.788994] i915_vma_instance+0xee/0xc10 [i915]
<4> [357.789290] init_status_page+0x7b/0x420 [i915]
<4> [357.789532] intel_engines_init+0x1d8/0x980 [i915]
<4> [357.789772] intel_gt_init+0x175/0x450 [i915]
<4> [357.790014] i915_gem_init+0x113/0x340 [i915]
<4> [357.790281] i915_driver_probe+0x847/0xed0 [i915]
<4> [357.790504] i915_pci_probe+0xe6/0x220 [i915]
...
Closer analysis of CI results history has revealed a dependency of the
error on a few IGT tests, namely:
- igt@api_intel_allocator@fork-simple-stress-signal,
- igt@api_intel_allocator@two-level-inception-interruptible,
- igt@gem_linear_blits@interruptible,
- igt@prime_mmap_coherency@ioctl-errors,
which invisibly trigger the issue, then exhibited with first driver unbind
attempt.
All of the above tests perform actions which are actively interrupted with
signals. Further debugging has allowed to narrow that scope down to
DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring
submission, in particular.
If successful then that function, or its execlists or GuC submission
equivalent, is supposed to be called only once per GEM context engine,
followed by raise of a flag that prevents the function from being called
again. The function is expected to unwind its internal errors itself, so
it may be safely called once more after it returns an error.
In case of ring submission, the function first gets a reference to the
engine's legacy timeline and then allocates a VMA. If the VMA allocation
fails, e.g. when i915_vma_instance() called from inside is interrupted
with a signal, then ring_context_alloc() fails, leaving the timeline held
referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the
timeline is got, and only that last one is put on successful completion.
As a consequence, the legacy timeline, with its underlying engine status
page's VMA object, is still held and not released on driver unbind.
Get the legacy timeline only after successful allocation of the context
engine's VMA.
v2: Add a note on other submission methods (Krzysztof Karas):
Both execlists and GuC submission use lrc_alloc() which seems free
from a similar issue.
Fixes: 75d0a7f31eec ("drm/i915: Lift timeline into intel_context")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Wed Jun 25 10:21:58 2025 -0500
drm/i915/selftests: Change mock_request() to return error pointers
[ Upstream commit caa7c7a76b78ce41d347003f84975125383e6b59 ]
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f0f23397d045c7ebca048ce8def1c43)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matthew Brost <matthew.brost@intel.com>
Date: Fri Jun 13 14:20:13 2025 -0700
drm/sched: Increment job count before swapping tail spsc queue
commit 8af39ec5cf2be522c8eb43a3d8005ed59e4daaee upstream.
A small race exists between spsc_queue_push and the run-job worker, in
which spsc_queue_push may return not-first while the run-job worker has
already idled due to the job count being zero. If this race occurs, job
scheduling stops, leading to hangs while waiting on the job’s DMA
fences.
Seal this race by incrementing the job count before appending to the
SPSC queue.
This race was observed on a drm-tip 6.16-rc1 build with the Xe driver in
an SVM test case.
Fixes: 1b1f42d8fde4 ("drm: move amd_gpu_scheduler into common location")
Fixes: 27105db6c63a ("drm/amdgpu: Add SPSC queue to scheduler.")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250613212013.719312-1-matthew.brost@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thierry Reding <treding@nvidia.com>
Date: Mon Apr 21 11:13:05 2025 -0500
drm/tegra: Assign plane type before registration
commit 9ff4fdf4f44b69237c0afc1d3a8dac916ce66f3e upstream.
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
Suggested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Fixes: 473079549f27 ("drm/tegra: dc: Add Tegra186 support")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250421-tegra-drm-primary-v2-1-7f740c4c2121@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maíra Canal <mcanal@igalia.com>
Date: Sat Jun 28 19:42:42 2025 -0300
drm/v3d: Disable interrupts before resetting the GPU
[ Upstream commit 226862f50a7a88e4e4de9abbf36c64d19acd6fd0 ]
Currently, an interrupt can be triggered during a GPU reset, which can
lead to GPU hangs and NULL pointer dereference in an interrupt context
as shown in the following trace:
[ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0
[ 314.043822] Mem abort info:
[ 314.046606] ESR = 0x0000000096000005
[ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits
[ 314.055651] SET = 0, FnV = 0
[ 314.058695] EA = 0, S1PTW = 0
[ 314.061826] FSC = 0x05: level 1 translation fault
[ 314.066694] Data abort info:
[ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000
[ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight
[ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1
[ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d]
[ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d]
[ 314.160198] sp : ffffffc080003ea0
[ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000
[ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0
[ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000
[ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000
[ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000
[ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001
[ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874
[ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180
[ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb
[ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 314.234807] Call trace:
[ 314.237243] v3d_irq+0xec/0x2e0 [v3d]
[ 314.240906] __handle_irq_event_percpu+0x58/0x218
[ 314.245609] handle_irq_event+0x54/0xb8
[ 314.249439] handle_fasteoi_irq+0xac/0x240
[ 314.253527] handle_irq_desc+0x48/0x68
[ 314.257269] generic_handle_domain_irq+0x24/0x38
[ 314.261879] gic_handle_irq+0x48/0xd8
[ 314.265533] call_on_irq_stack+0x24/0x58
[ 314.269448] do_interrupt_handler+0x88/0x98
[ 314.273624] el1_interrupt+0x34/0x68
[ 314.277193] el1h_64_irq_handler+0x18/0x28
[ 314.281281] el1h_64_irq+0x64/0x68
[ 314.284673] default_idle_call+0x3c/0x168
[ 314.288675] do_idle+0x1fc/0x230
[ 314.291895] cpu_startup_entry+0x3c/0x50
[ 314.295810] rest_init+0xe4/0xf0
[ 314.299030] start_kernel+0x5e8/0x790
[ 314.302684] __primary_switched+0x80/0x90
[ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017)
[ 314.312775] ---[ end trace 0000000000000000 ]---
[ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 314.324249] SMP: stopping secondary CPUs
[ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000
[ 314.334076] PHYS_OFFSET: 0x0
[ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b
[ 314.342337] Memory Limit: none
[ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Before resetting the GPU, it's necessary to disable all interrupts and
deal with any interrupt handler still in-flight. Otherwise, the GPU might
reset with jobs still running, or yet, an interrupt could be handled
during the reset.
Cc: stable@vger.kernel.org
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250628224243.47599-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alok Tiwari <alok.a.tiwari@oracle.com>
Date: Sat Jun 28 07:56:05 2025 -0700
enic: fix incorrect MTU comparison in enic_change_mtu()
[ Upstream commit aaf2b2480375099c022a82023e1cd772bf1c6a5d ]
The comparison in enic_change_mtu() incorrectly used the current
netdev->mtu instead of the new new_mtu value when warning about
an MTU exceeding the port MTU. This could suppress valid warnings
or issue incorrect ones.
Fix the condition and log to properly reflect the new_mtu.
Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: John Daley <johndale@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Mon Jul 7 15:36:37 2025 -0400
ethernet: atl1: Add missing DMA mapping error checks and count errors
[ Upstream commit d72411d20905180cdc452c553be17481b24463d2 ]
The `dma_map_XXX()` functions can fail and must be checked using
`dma_mapping_error()`. This patch adds proper error handling for all
DMA mapping calls.
In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is
deallocated and marked accordingly.
In `atl1_tx_map()`, previously mapped buffers are unmapped and the
packet is dropped on failure.
If `atl1_xmit_frame()` drops the packet, increment the tx_error counter.
Fixes: f3cc28c79760 ("Add Attansic L1 ethernet driver.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20250625141629.114984-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon Jun 30 02:52:13 2025 -0400
fix proc_sys_compare() handling of in-lookup dentries
[ Upstream commit b969f9614885c20f903e1d1f9445611daf161d6d ]
There's one case where ->d_compare() can be called for an in-lookup
dentry; usually that's nothing special from ->d_compare() point of
view, but... proc_sys_compare() is weird.
The thing is, /proc/sys subdirectories can look differently for
different processes. Up to and including having the same name
resolve to different dentries - all of them hashed.
The way it's done is ->d_compare() refusing to admit a match unless
this dentry is supposed to be visible to this caller. The information
needed to discriminate between them is stored in inode; it is set
during proc_sys_lookup() and until it's done d_splice_alias() we really
can't tell who should that dentry be visible for.
Normally there's no negative dentries in /proc/sys; we can run into
a dying dentry in RCU dcache lookup, but those can be safely rejected.
However, ->d_compare() is also called for in-lookup dentries, before
they get positive - or hashed, for that matter. In case of match
we will wait until dentry leaves in-lookup state and repeat ->d_compare()
afterwards. In other words, the right behaviour is to treat the
name match as sufficient for in-lookup dentries; if dentry is not
for us, we'll see that when we recheck once proc_sys_lookup() is
done with it.
While we are at it, fix the misspelled READ_ONCE and WRITE_ONCE there.
Fixes: d9171b934526 ("parallel lookups machinery, part 4 (and last)")
Reported-by: NeilBrown <neilb@brown.name>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Date: Thu May 15 21:04:15 2025 +0200
flexfiles/pNFS: update stats on NFS4ERR_DELAY for v4.1 DSes
[ Upstream commit e3e3775392f3f0f3e3044f8c162bf47858e01759 ]
On NFS4ERR_DELAY nfs slient updates its stats, but misses for
flexfiles v4.1 DSes.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Stable-dep-of: 38074de35b01 ("NFSv4/flexfiles: Fix handling of NFS level errors in I/O")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Kleikamp <dave.kleikamp@oracle.com>
Date: Thu Feb 20 10:31:19 2025 -0600
fs/jfs: consolidate sanity checking in dbMount
[ Upstream commit 0d250b1c52484d489e31df2cf9118b7c4bd49d31 ]
Sanity checks have been added to dbMount as individual if clauses with
identical error handling. Move these all into one clause.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Stable-dep-of: 37bfb464ddca ("jfs: validate AG parameters in dbMount() to prevent crashes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Heng <zhangheng@kylinos.cn>
Date: Thu Jun 5 15:29:59 2025 +0800
HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY
[ Upstream commit 1a8953f4f7746c6a515989774fe03047c522c613 ]
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an
audio device is requested to get specific report id, the following error
may occur.
[ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd
[ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00
[ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device
[ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
[ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
[ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35
[ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2
[ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint
[ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
Ignore HID interface. The device is working properly.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Date: Tue May 6 13:50:15 2025 +0800
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
[ Upstream commit 54bae4c17c11688339eb73a04fd24203bb6e7494 ]
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qasim Ijaz <qasdev00@gmail.com>
Date: Fri Jun 6 19:49:59 2025 +0100
HID: wacom: fix kobject reference count leak
commit 85a720f4337f0ddf1603c8b75a8f1ffbbe022ef9 upstream.
When sysfs_create_files() fails in wacom_initialize_remotes() the error
is returned and the cleanup action will not have been registered yet.
As a result the kobject???s refcount is never dropped, so the
kobject can never be freed leading to a reference leak.
Fix this by calling kobject_put() before returning.
Fixes: 83e6b40e2de6 ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qasim Ijaz <qasdev00@gmail.com>
Date: Fri Jun 6 19:49:57 2025 +0100
HID: wacom: fix memory leak on kobject creation failure
commit 5ae416c5b1e2e816aee7b3fc8347adf70afabb4c upstream.
During wacom_initialize_remotes() a fifo buffer is allocated
with kfifo_alloc() and later a cleanup action is registered
during devm_add_action_or_reset() to clean it up.
However if the code fails to create a kobject and register it
with sysfs the code simply returns -ENOMEM before the cleanup
action is registered leading to a memory leak.
Fix this by ensuring the fifo is freed when the kobject creation
and registration process fails.
Fixes: 83e6b40e2de6 ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qasim Ijaz <qasdev00@gmail.com>
Date: Fri Jun 6 19:49:58 2025 +0100
HID: wacom: fix memory leak on sysfs attribute creation failure
commit 1a19ae437ca5d5c7d9ec2678946fb339b1c706bf upstream.
When sysfs_create_files() fails during wacom_initialize_remotes() the
fifo buffer is not freed leading to a memory leak.
Fix this by calling kfifo_free() before returning.
Fixes: 83e6b40e2de6 ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Thu May 22 08:42:35 2025 +0200
i2c: robotfuzz-osif: disable zero-length read messages
commit 56ad91c1aa9c18064348edf69308080b03c9dc48 upstream.
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522064234.3721-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Thu May 22 08:43:49 2025 +0200
i2c: tiny-usb: disable zero-length read messages
commit cbdb25ccf7566eee0c2b945e35cb98baf9ed0aa6 upstream.
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: e8c76eed2ecd ("i2c: New i2c-tiny-usb bus driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org> # v2.6.22+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522064349.3823-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Date: Sun Apr 13 11:34:41 2025 +0100
iio: pressure: zpa2326: Use aligned_s64 for the timestamp
[ Upstream commit 886a446b76afddfad307488e95e87f23a08ffd51 ]
On x86_32 s64 fields are only 32-bit aligned. Hence force the alignment of
the field and padding in the structure by using aligned_s64 instead.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-19-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hansg@kernel.org>
Date: Fri Jan 26 17:07:24 2024 +0100
Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 upstream.
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") not only the getid command is skipped, but also
the de-activating of the keyboard at the end of atkbd_probe(), potentially
re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd -
fix multi-byte scancode handling on reconnect").
Make sure multi-byte scancode handling on reconnect is still handled
correctly by not skipping the atkbd_deactivate() call.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matt Reynolds <mattreynolds@chromium.org>
Date: Thu Apr 29 15:29:37 2021 -0700
Input: xpad - add support for Amazon Game Controller
[ Upstream commit 05665cef4b745cb46b1d1b8e96deaa25464092d3 ]
The Amazon Luna controller (product name "Amazon Game Controller") behaves
like an Xbox 360 controller when connected over USB.
Signed-off-by: Matt Reynolds <mattreynolds@chromium.org>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Link: https://lore.kernel.org/r/20210429103548.1.If5f9a44cb81e25b9350f7c6c0b3c88b4ecd81166@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 22c69d786ef8 ("Input: xpad - support Acer NGR 200 Controller")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vicki Pfau <vi@endrift.com>
Date: Thu Mar 23 18:32:43 2023 -0700
Input: xpad - add VID for Turtle Beach controllers
[ Upstream commit 1999a6b12a3b5c8953fc9ec74863ebc75a1b851d ]
This adds support for the Turtle Beach REACT-R and Recon Xbox controllers
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230225012147.276489-4-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 22c69d786ef8 ("Input: xpad - support Acer NGR 200 Controller")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nilton Perim Neto <niltonperimneto@gmail.com>
Date: Fri Jun 27 16:29:40 2025 -0700
Input: xpad - support Acer NGR 200 Controller
[ Upstream commit 22c69d786ef8fb789c61ca75492a272774221324 ]
Add the NGR 200 Xbox 360 to the list of recognized controllers.
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250608060517.14967-1-niltonperimneto@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vasiliy Kovalev <kovalev@altlinux.org>
Date: Mon Mar 10 11:56:02 2025 +0300
jfs: validate AG parameters in dbMount() to prevent crashes
[ Upstream commit 37bfb464ddca87f203071b5bd562cd91ddc0b40a ]
Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch
corrupted metadata early and avoid undefined behavior in dbAllocAG.
Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE:
- agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift
(L2LPERCTL - 2*agheight) >= 0.
- agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight))
ensures agperlev >= 1.
- Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5).
- LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG;
2^(10 - 2*agheight) prevents division to 0.
- agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within
stree (size 1365).
- Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8).
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9
shift exponent -335544310 is negative
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468
dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400
dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613
jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105
jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+fe8264911355151c487f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fe8264911355151c487f
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Sat Mar 5 21:56:05 2022 +0900
kbuild: add --target to correctly cross-compile UAPI headers with Clang
[ Upstream commit 9fbed27a7a1101c926718dfa9b49aff1d04477b5 ]
When you compile-test UAPI headers (CONFIG_UAPI_HEADER_TEST=y) with
Clang, they are currently compiled for the host target (likely x86_64)
regardless of the given ARCH=.
In fact, some exported headers include libc headers. For example,
include/uapi/linux/agpgart.h includes <stdlib.h> after being exported.
The header search paths should match to the target we are compiling
them for.
Pick up the --target triple from KBUILD_CFLAGS in the same ways as
commit 7f58b487e9ff ("kbuild: make Clang build userprogs for target
architecture").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Stable-dep-of: 02e9a22ceef0 ("kbuild: hdrcheck: fix cross build with clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue Feb 25 11:00:31 2025 +0100
kbuild: hdrcheck: fix cross build with clang
[ Upstream commit 02e9a22ceef0227175e391902d8760425fa072c6 ]
The headercheck tries to call clang with a mix of compiler arguments
that don't include the target architecture. When building e.g. x86
headers on arm64, this produces a warning like
clang: warning: unknown platform, assuming -mfloat-abi=soft
Add in the KBUILD_CPPFLAGS, which contain the target, in order to make it
build properly.
See also 1b71c2fb04e7 ("kbuild: userprogs: fix bitsize and target
detection on clang").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Thu Apr 23 23:23:53 2020 +0900
kbuild: use -MMD instead of -MD to exclude system headers from dependency
[ Upstream commit 30a7729771731971839cc969d2a321e6ea7a144b ]
This omits system headers from the generated header dependency.
System headers are not updated unless you upgrade the compiler. Nor do
they contain CONFIG options, so fixdep does not need to parse them.
Having said that, the effect of this optimization will be quite small
because the kernel code generally does not include system headers
except <stdarg.h>. Host programs include a lot of system headers,
but there are not so many in the kernel tree.
At first, keeping system headers in .*.cmd files might be useful to
detect the compiler update, but there is no guarantee that <stdarg.h>
is included from every file. So, I implemented a more reliable way in
the previous commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: 02e9a22ceef0 ("kbuild: hdrcheck: fix cross build with clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Mon Jun 30 14:36:40 2025 -0500
lib: test_objagg: Set error message in check_expect_hints_stats()
[ Upstream commit e6ed134a4ef592fe1fd0cafac9683813b3c8f3e8 ]
Smatch complains that the error message isn't set in the caller:
lib/test_objagg.c:923 test_hints_case2()
error: uninitialized symbol 'errmsg'.
This static checker warning only showed up after a recent refactoring
but the bug dates back to when the code was originally added. This
likely doesn't affect anything in real life.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202506281403.DsuyHFTZ-lkp@intel.com/
Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8548f423-2e3b-4bb7-b816-5041de2762aa@sabinyo.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Jul 17 18:25:06 2025 +0200
Linux 5.4.296
Link: https://lore.kernel.org/r/20250715130800.293690950@linuxfoundation.org
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250716141302.507854168@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Thu Jun 5 14:28:45 2025 +0200
Logitech C-270 even more broken
commit cee4392a57e14a799fbdee193bc4c0de65b29521 upstream.
Some varieties of this device don't work with
RESET_RESUME alone.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250605122852.1440382-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Fri Apr 11 21:14:10 2025 +0800
mailbox: Not protect module_put with spin_lock_irqsave
[ Upstream commit dddbd233e67e792bb0a3f9694a4707e6be29b2c6 ]
&chan->lock is not supposed to protect 'chan->mbox'.
And in __mbox_bind_client, try_module_get is also not protected
by &chan->lock. So move module_put out of the lock protected
region.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Sat May 24 14:13:10 2025 +0800
md/md-bitmap: fix dm-raid max_write_behind setting
[ Upstream commit 2afe17794cfed5f80295b1b9facd66e6f65e5002 ]
It's supposed to be COUNTER_MAX / 2, not COUNTER_MAX.
Link: https://lore.kernel.org/linux-raid/20250524061320.370630-14-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wang Jinchao <wangjinchao600@gmail.com>
Date: Thu Jun 12 19:28:40 2025 +0800
md/raid1: Fix stack memory use after return in raid1_reshape
[ Upstream commit d67ed2ccd2d1dcfda9292c0ea8697a9d0f2f0d98 ]
In the raid1_reshape function, newpool is
allocated on the stack and assigned to conf->r1bio_pool.
This results in conf->r1bio_pool.wait.head pointing
to a stack address.
Accessing this address later can lead to a kernel panic.
Example access path:
raid1_reshape()
{
// newpool is on the stack
mempool_t newpool, oldpool;
// initialize newpool.wait.head to stack address
mempool_init(&newpool, ...);
conf->r1bio_pool = newpool;
}
raid1_read_request() or raid1_write_request()
{
alloc_r1bio()
{
mempool_alloc()
{
// if pool->alloc fails
remove_element()
{
--pool->curr_nr;
}
}
}
}
mempool_free()
{
if (pool->curr_nr < pool->min_nr) {
// pool->wait.head is a stack address
// wake_up() will try to access this invalid address
// which leads to a kernel panic
return;
wake_up(&pool->wait);
}
}
Fix:
reinit conf->r1bio_pool.wait after assigning newpool.
Fixes: afeee514ce7f ("md: convert to bioset_init()/mempool_init()")
Signed-off-by: Wang Jinchao <wangjinchao600@gmail.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250612112901.3023950-1-wangjinchao600@gmail.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Edward Adam Davis <eadavis@qq.com>
Date: Sat Apr 5 19:56:41 2025 +0800
media: cxusb: no longer judge rbuf when the write fails
[ Upstream commit 73fb3b92da84637e3817580fa205d48065924e15 ]
syzbot reported a uninit-value in cxusb_i2c_xfer. [1]
Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw()
succeeds and rlen is greater than 0, the read operation of usb_bulk_msg()
will be executed to read rlen bytes of data from the dvb device into the
rbuf.
In this case, although rlen is 1, the write operation failed which resulted
in the dvb read operation not being executed, and ultimately variable i was
not initialized.
[1]
BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline]
BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196
cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline]
cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196
__i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1
i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315
i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343
i2c_master_send include/linux/i2c.h:109 [inline]
i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183
do_loop_readv_writev fs/read_write.c:848 [inline]
vfs_writev+0x963/0x14e0 fs/read_write.c:1057
do_writev+0x247/0x5c0 fs/read_write.c:1101
__do_sys_writev fs/read_write.c:1169 [inline]
__se_sys_writev fs/read_write.c:1166 [inline]
__x64_sys_writev+0x98/0xe0 fs/read_write.c:1166
x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported-by: syzbot+526bd95c0ec629993bf3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=526bd95c0ec629993bf3
Tested-by: syzbot+526bd95c0ec629993bf3@syzkaller.appspotmail.com
Fixes: 22c6d93a7310 ("[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box")
Cc: stable@vger.kernel.org
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Young <sean@mess.org>
Date: Mon Nov 11 12:40:52 2019 +0100
media: cxusb: use dev_dbg() rather than hand-rolled debug
[ Upstream commit c376d66515f89dd833b344c419e313db9ad169b5 ]
This solves the following compiler warnings:
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_gpio_tuner’:
drivers/media/usb/dvb-usb/cxusb.c:128:35: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
128 | deb_info("gpio_write failed.\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_bluebird_gpio_rw’:
drivers/media/usb/dvb-usb/cxusb.c:145:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
145 | deb_info("bluebird_gpio_write failed.\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_i2c_xfer’:
drivers/media/usb/dvb-usb/cxusb.c:251:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
251 | deb_i2c("i2c read may have failed\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c:274:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
274 | deb_i2c("i2c write may have failed\n");
| ^
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 73fb3b92da84 ("media: cxusb: no longer judge rbuf when the write fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed May 7 18:09:13 2025 +0200
media: omap3isp: use sgtable-based scatterlist wrappers
[ Upstream commit 3de572fe2189a4a0bd80295e1f478401e739498e ]
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: d33186d0be18 ("[media] omap3isp: ccdc: Use the DMA API for LSC")
Fixes: 0e24e90f2ca7 ("[media] omap3isp: stat: Use the DMA API")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ricardo Ribalda <ribalda@chromium.org>
Date: Mon Feb 24 10:34:53 2025 +0000
media: uvcvideo: Return the number of processed controls
commit ba4fafb02ad6a4eb2e00f861893b5db42ba54369 upstream.
If we let know our callers that we have not done anything, they will be
able to optimize their decisions.
Cc: stable@kernel.org
Fixes: b4012002f3a3 ("[media] uvcvideo: Add support for control events")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-1-de993ed9823b@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ricardo Ribalda <ribalda@chromium.org>
Date: Mon Feb 24 10:34:55 2025 +0000
media: uvcvideo: Rollback non processed entities on error
commit a70705d3c020d0d5c3ab6a5cc93e011ac35e7d48 upstream.
If we fail to commit an entity, we need to restore the
UVC_CTRL_DATA_BACKUP for the other uncommitted entities. Otherwise the
control cache and the device would be out of sync.
Cc: stable@kernel.org
Fixes: b4012002f3a3 ("[media] uvcvideo: Add support for control events")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/linux-media/fe845e04-9fde-46ee-9763-a6f00867929a@redhat.com/
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-3-de993ed9823b@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ricardo Ribalda <ribalda@chromium.org>
Date: Mon Feb 24 10:34:54 2025 +0000
media: uvcvideo: Send control events for partial succeeds
commit 5c791467aea6277430da5f089b9b6c2a9d8a4af7 upstream.
Today, when we are applying a change to entities A, B. If A succeeds and B
fails the events for A are not sent.
This change changes the code so the events for A are send right after
they happen.
Cc: stable@kernel.org
Fixes: b4012002f3a3 ("[media] uvcvideo: Add support for control events")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-2-de993ed9823b@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Denis Arefev <arefev@swemel.ru>
Date: Tue Apr 15 11:27:21 2025 +0300
media: vivid: Change the siize of the composing
[ Upstream commit f83ac8d30c43fd902af7c84c480f216157b60ef0 ]
syzkaller found a bug:
BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline]
BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705
Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304
CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline]
tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705
vivid_fillbuff drivers/media/test-drivers/vivid/vivid-kthread-cap.c:470 [inline]
vivid_thread_vid_cap_tick+0xf8e/0x60d0 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:629
vivid_thread_vid_cap+0x8aa/0xf30 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:767
kthread+0x7a9/0x920 kernel/kthread.c:464
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
The composition size cannot be larger than the size of fmt_cap_rect.
So execute v4l2_rect_map_inside() even if has_compose_cap == 0.
Fixes: 94a7ad928346 ("media: vivid: fix compose size exceed boundary")
Cc: stable@vger.kernel.org
Reported-by: syzbot+365005005522b70a36f2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=8ed8e8cc30cbe0d86c9a25bd1d6a5775129b8ea3
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Apr 6 21:50:11 2025 +0200
mfd: max14577: Fix wakeup source leaks on device unbind
[ Upstream commit d905d06e64b0eb3da43af6186c132f5282197998 ]
Device can be unbound, so driver must also release memory for the wakeup
source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406-mfd-device-wakekup-leak-v1-3-318e14bdba0a@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yue Hu <huyue2@yulong.com>
Date: Mon May 17 18:09:00 2021 +0800
mmc: mediatek: use data instead of mrq parameter from msdc_{un}prepare_data()
[ Upstream commit 151071351bb6f3d1861e99a22c4cebadf81911a0 ]
We already have 'mrq->data' before calling these two functions, no
need to find it again via 'mrq->data' internally. Also remove local
data variable accordingly.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Link: https://lore.kernel.org/r/20210517100900.1620-1-zbestahu@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: f5de469990f1 ("mtk-sd: Prevent memory corruption from DMA map failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Victor Shih <victor.shih@genesyslogic.com.tw>
Date: Fri Jun 6 19:01:20 2025 +0800
mmc: sdhci: Add a helper function for dump register in dynamic debug mode
commit 2881ba9af073faa8ee7408a8d1e0575e50eb3f6c upstream.
Add a helper function for dump register in dynamic debug mode.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250606110121.96314-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Date: Thu Jun 5 10:07:38 2025 +0900
mtk-sd: Fix a pagefault in dma_unmap_sg() for not prepared data
commit 539d80575b810c7a5987c7ac8915e3bc99c03695 upstream.
When swiotlb buffer is full, the dma_map_sg() returns 0 to
msdc_prepare_data(), but it does not check it and sets the
MSDC_PREPARE_FLAG.
swiotlb_tbl_map_single() /* prints "swiotlb buffer is full" */
<-swiotlb_map()
<-dma_direct_map_page()
<-dma_direct_map_sg()
<-__dma_map_sg_attrs()
<-dma_map_sg_attrs()
<-dma_map_sg() /* returns 0 (pages mapped) */
<-msdc_prepare_data()
Then, the msdc_unprepare_data() checks MSDC_PREPARE_FLAG and calls
dma_unmap_sg() with unmapped pages. It causes a page fault.
To fix this problem, Do not set MSDC_PREPARE_FLAG if dma_map_sg()
fails because this is not prepared.
Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174908565814.4056588.769599127120955383.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Date: Thu Jun 12 20:26:10 2025 +0900
mtk-sd: Prevent memory corruption from DMA map failure
[ Upstream commit f5de469990f19569627ea0dd56536ff5a13beaa3 ]
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174972756982.3337526.6755001617701603082.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sergey Senozhatsky <senozhatsky@chromium.org>
Date: Wed Jun 25 14:20:37 2025 +0900
mtk-sd: reset host->mrq on prepare_data() error
[ Upstream commit ec54c0a20709ed6e56f40a8d59eee725c31a916b ]
Do not leave host with dangling ->mrq pointer if we hit
the msdc_prepare_data() error out path.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: f5de469990f1 ("mtk-sd: Prevent memory corruption from DMA map failure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250625052106.584905-1-senozhatsky@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Victor Nogueira <victor@mojatatu.com>
Date: Mon Jul 7 18:08:01 2025 -0300
net/sched: Abort __tc_modify_qdisc if parent class does not exist
[ Upstream commit ffdde7bf5a439aaa1955ebd581f5c64ab1533963 ]
Lion's patch [1] revealed an ancient bug in the qdisc API.
Whenever a user creates/modifies a qdisc specifying as a parent another
qdisc, the qdisc API will, during grafting, detect that the user is
not trying to attach to a class and reject. However grafting is
performed after qdisc_create (and thus the qdiscs' init callback) is
executed. In qdiscs that eventually call qdisc_tree_reduce_backlog
during init or change (such as fq, hhf, choke, etc), an issue
arises. For example, executing the following commands:
sudo tc qdisc add dev lo root handle a: htb default 2
sudo tc qdisc add dev lo parent a: handle beef fq
Qdiscs such as fq, hhf, choke, etc unconditionally invoke
qdisc_tree_reduce_backlog() in their control path init() or change() which
then causes a failure to find the child class; however, that does not stop
the unconditional invocation of the assumed child qdisc's qlen_notify with
a null class. All these qdiscs make the assumption that class is non-null.
The solution is ensure that qdisc_leaf() which looks up the parent
class, and is invoked prior to qdisc_create(), should return failure on
not finding the class.
In this patch, we leverage qdisc_leaf to return ERR_PTRs whenever the
parentid doesn't correspond to a class, so that we can detect it
earlier on and abort before qdisc_create is called.
[1] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/
Fixes: 5e50da01d0ce ("[NET_SCHED]: Fix endless loops (part 2): "simple" qdiscs")
Reported-by: syzbot+d8b58d7b0ad89a678a16@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68663c93.a70a0220.5d25f.0857.GAE@google.com/
Reported-by: syzbot+5eccb463fa89309d8bdc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68663c94.a70a0220.5d25f.0858.GAE@google.com/
Reported-by: syzbot+1261670bbdefc5485a06@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/686764a5.a00a0220.c7b3.0013.GAE@google.com/
Reported-by: syzbot+15b96fc3aac35468fe77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/686764a5.a00a0220.c7b3.0014.GAE@google.com/
Reported-by: syzbot+4dadc5aecf80324d5a51@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68679e81.a70a0220.29cf51.0016.GAE@google.com/
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250707210801.372995-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lion Ackermann <nnamrec@gmail.com>
Date: Mon Jun 30 15:27:30 2025 +0200
net/sched: Always pass notifications when child class becomes empty
[ Upstream commit 103406b38c600fec1fe375a77b27d87e314aea09 ]
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f981138109f ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()")
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kito Xu <veritas501@foxmail.com>
Date: Wed Jul 9 03:52:51 2025 +0000
net: appletalk: Fix device refcount leak in atrtr_create()
[ Upstream commit 711c80f7d8b163d3ecd463cd96f07230f488e750 ]
When updating an existing route entry in atrtr_create(), the old device
reference was not being released before assigning the new device,
leading to a device refcount leak. Fix this by calling dev_put() to
release the old device reference before holding the new one.
Fixes: c7f905f0f6d4 ("[ATALK]: Add missing dev_hold() to atrtr_create().")
Signed-off-by: Kito Xu <veritas501@foxmail.com>
Link: https://patch.msgid.link/tencent_E1A26771CDAB389A0396D1681A90A49E5D09@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Horman <horms@kernel.org>
Date: Tue Jun 24 17:35:12 2025 +0100
net: enetc: Correct endianness handling in _enetc_rd_reg64
[ Upstream commit 7b515f35a911fdc31fbde6531828dcd6ae9803d3 ]
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
Flagged by Sparse.
Compile tested only.
Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics")
Closes: https://lore.kernel.org/all/AM9PR04MB850500D3FC24FE23DEFCEA158879A@AM9PR04MB8505.eurprd04.prod.outlook.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250624-etnetc-le-v1-1-a73a95d96e4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Georg Kohmann <geokohma@cisco.com>
Date: Wed Oct 7 14:53:02 2020 +0200
net: ipv6: Discard next-hop MTU less than minimum link MTU
commit 4a65dff81a04f874fa6915c7f069b4dc2c4010e4 upstream.
When a ICMPV6_PKT_TOOBIG report a next-hop MTU that is less than the IPv6
minimum link MTU, the estimated path MTU is reduced to the minimum link
MTU. This behaviour breaks TAHI IPv6 Core Conformance Test v6LC4.1.6:
Packet Too Big Less than IPv6 MTU.
Referring to RFC 8201 section 4: "If a node receives a Packet Too Big
message reporting a next-hop MTU that is less than the IPv6 minimum link
MTU, it must discard it. A node must not reduce its estimate of the Path
MTU below the IPv6 minimum link MTU on receipt of a Packet Too Big
message."
Drop the path MTU update if reported MTU is less than the minimum link MTU.
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Wed Jul 9 15:07:53 2025 +0200
net: phy: microchip: limit 100M workaround to link-down events on LAN88xx
[ Upstream commit dd4360c0e8504f2f7639c7f5d07c93cfd6a98333 ]
Restrict the 100Mbit forced-mode workaround to link-down transitions
only, to prevent repeated link reset cycles in certain configurations.
The workaround was originally introduced to improve signal reliability
when switching cables between long and short distances. It temporarily
forces the PHY into 10 Mbps before returning to 100 Mbps.
However, when used with autonegotiating link partners (e.g., Intel i350),
executing this workaround on every link change can confuse the partner
and cause constant renegotiation loops. This results in repeated link
down/up transitions and the PHY never reaching a stable state.
Limit the workaround to only run during the PHY_NOLINK state. This ensures
it is triggered only once per link drop, avoiding disruptive toggling
while still preserving its intended effect.
Note: I am not able to reproduce the original issue that this workaround
addresses. I can only confirm that 100 Mbit mode works correctly in my
test setup. Based on code inspection, I assume the workaround aims to
reset some internal state machine or signal block by toggling speeds.
However, a PHY reset is already performed earlier in the function via
phy_init_hw(), which may achieve a similar effect. Without a reproducer,
I conservatively keep the workaround but restrict its conditions.
Fixes: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gustavo A. R. Silva <gustavoars@kernel.org>
Date: Tue Mar 9 23:43:45 2021 -0600
net: rose: Fix fall-through warnings for Clang
[ Upstream commit 90d181ca488f466904ea59dd5c836f766b69c71b ]
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 34a500caf48c ("rose: fix dangling neighbour pointers in rose_rt_device_down()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xiaowei Li <xiaowei.li@simcom.com>
Date: Fri Jun 20 10:27:02 2025 +0800
net: usb: qmi_wwan: add SIMCom 8230C composition
[ Upstream commit 0b39b055b5b48cbbdf5746a1ca6e3f6b0221e537 ]
Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip.
0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9071 Rev= 5.15
S: Manufacturer=SIMCOM
S: Product=SDXBAAGHA-IDP _SN:D744C4C5
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/tencent_21D781FAA4969FEACA6ABB460362B52C9409@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Fri Jul 11 05:32:07 2025 +0000
netlink: Fix rmem check in netlink_broadcast_deliver().
commit a3c4a125ec725cefb40047eb05ff9eafd57830b4 upstream.
We need to allow queuing at least one skb even when skb is
larger than sk->sk_rcvbuf.
The cited commit made a mistake while converting a condition
in netlink_broadcast_deliver().
Let's correct the rmem check for the allow-one-skb rule.
Fixes: ae8f160e7eb24 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711053208.2965945-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Fri Jul 4 05:48:18 2025 +0000
netlink: Fix wraparounds of sk->sk_rmem_alloc.
[ Upstream commit ae8f160e7eb24240a2a79fc4c815c6a0d4ee16cc ]
Netlink has this pattern in some places
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
, which has the same problem fixed by commit 5a465a0da13e ("udp:
Fix multiple wraparounds of sk->sk_rmem_alloc.").
For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition
is always false as the two operands are of int.
Then, a single socket can eat as many skb as possible until OOM
happens, and we can see multiple wraparounds of sk->sk_rmem_alloc.
Let's fix it by using atomic_add_return() and comparing the two
variables as unsigned int.
Before:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
-1668710080 0 rtnl:nl_wraparound/293 *
After:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
2147483072 0 rtnl:nl_wraparound/290 *
^
`--- INT_MAX - 576
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/cover.1750285100.git.jbaron@akamai.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250704054824.1580222-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Thu Jul 10 17:11:21 2025 -0700
netlink: make sure we allow at least one dump skb
commit a215b5723922f8099078478122f02100e489cb80 upstream.
Commit under Fixes tightened up the memory accounting for Netlink
sockets. Looks like the accounting is too strict for some existing
use cases, Marek reported issues with nl80211 / WiFi iw CLI.
To reduce number of iterations Netlink dumps try to allocate
messages based on the size of the buffer passed to previous
recvmsg() calls. If user space uses a larger buffer in recvmsg()
than sk_rcvbuf we will allocate an skb we won't be able to queue.
Make sure we always allow at least one skb to be queued.
Same workaround is already present in netlink_attachskb().
Alternative would be to cap the allocation size to
rcvbuf - rmem_alloc
but as I said, the workaround is already present in other places.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/9794af18-4905-46c6-b12c-365ea2f05858@samsung.com
Fixes: ae8f160e7eb2 ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711001121.3649033-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Thu Jun 12 14:52:50 2025 -0700
nfs: Clean up /proc/net/rpc/nfs when nfs_fs_proc_net_init() fails.
[ Upstream commit e8d6f3ab59468e230f3253efe5cb63efa35289f7 ]
syzbot reported a warning below [1] following a fault injection in
nfs_fs_proc_net_init(). [0]
When nfs_fs_proc_net_init() fails, /proc/net/rpc/nfs is not removed.
Later, rpc_proc_exit() tries to remove /proc/net/rpc, and the warning
is logged as the directory is not empty.
Let's handle the error of nfs_fs_proc_net_init() properly.
[0]:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
should_fail_ex (lib/fault-inject.c:73 lib/fault-inject.c:174)
should_failslab (mm/failslab.c:46)
kmem_cache_alloc_noprof (mm/slub.c:4178 mm/slub.c:4204)
__proc_create (fs/proc/generic.c:427)
proc_create_reg (fs/proc/generic.c:554)
proc_create_net_data (fs/proc/proc_net.c:120)
nfs_fs_proc_net_init (fs/nfs/client.c:1409)
nfs_net_init (fs/nfs/inode.c:2600)
ops_init (net/core/net_namespace.c:138)
setup_net (net/core/net_namespace.c:443)
copy_net_ns (net/core/net_namespace.c:576)
create_new_namespaces (kernel/nsproxy.c:110)
unshare_nsproxy_namespaces (kernel/nsproxy.c:218 (discriminator 4))
ksys_unshare (kernel/fork.c:3123)
__x64_sys_unshare (kernel/fork.c:3190)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
[1]:
remove_proc_entry: removing non-empty directory 'net/rpc', leaking at least 'nfs'
WARNING: CPU: 1 PID: 6120 at fs/proc/generic.c:727 remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727
Modules linked in:
CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
RIP: 0010:remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727
Code: 3c 02 00 0f 85 85 00 00 00 48 8b 93 d8 00 00 00 4d 89 f0 4c 89 e9 48 c7 c6 40 ba a2 8b 48 c7 c7 60 b9 a2 8b e8 33 81 1d ff 90 <0f> 0b 90 90 e9 5f fe ff ff e8 04 69 5e ff 90 48 b8 00 00 00 00 00
RSP: 0018:ffffc90003637b08 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88805f534140 RCX: ffffffff817a92c8
RDX: ffff88807da99e00 RSI: ffffffff817a92d5 RDI: 0000000000000001
RBP: ffff888033431ac0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff888033431a00
R13: ffff888033431ae4 R14: ffff888033184724 R15: dffffc0000000000
FS: 0000555580328500(0000) GS:ffff888124a62000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f71733743e0 CR3: 000000007f618000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sunrpc_exit_net+0x46/0x90 net/sunrpc/sunrpc_syms.c:76
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x2eb/0xab0 net/core/net_namespace.c:253
setup_net+0x2e1/0x510 net/core/net_namespace.c:457
copy_net_ns+0x2a6/0x5f0 net/core/net_namespace.c:574
create_new_namespaces+0x3ea/0xa90 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:218
ksys_unshare+0x45b/0xa40 kernel/fork.c:3121
__do_sys_unshare kernel/fork.c:3192 [inline]
__se_sys_unshare kernel/fork.c:3190 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3190
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x490 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa1a6b8e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff3a090368 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007fa1a6db5fa0 RCX: 00007fa1a6b8e929
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000080
RBP: 00007fa1a6c10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa1a6db5fa0 R14: 00007fa1a6db5fa0 R15: 0000000000000001
</TASK>
Fixes: d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs in net namespaces")
Reported-by: syzbot+a4cc4ac22daa4a71b87c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a4cc4ac22daa4a71b87c
Tested-by: syzbot+a4cc4ac22daa4a71b87c@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Trond Myklebust <trond.myklebust@hammerspace.com>
Date: Thu Jun 19 15:16:11 2025 -0400
NFSv4/flexfiles: Fix handling of NFS level errors in I/O
[ Upstream commit 38074de35b015df5623f524d6f2b49a0cd395c40 ]
Allow the flexfiles error handling to recognise NFS level errors (as
opposed to RPC level errors) and handle them separately. The main
motivator is the NFSERR_PERM errors that get returned if the NFS client
connects to the data server through a port number that is lower than
1024. In that case, the client should disconnect and retry a READ on a
different data server, or it should retry a WRITE after reconnecting.
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Mon Jun 30 10:36:43 2025 +0200
nui: Fix dma_mapping_error() check
[ Upstream commit 561aa0e22b70a5e7246b73d62a824b3aef3fc375 ]
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f352 ("niu: Fix to check for dma mapping errors.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rob Herring <robh@kernel.org>
Date: Thu Feb 9 15:35:01 2023 -0600
of: Add of_property_present() helper
[ Upstream commit 9cbad37ce8122de32a1529e394b468bc101c9e7f ]
Add an of_property_present() function similar to
fwnode_property_present(). of_property_read_bool() could be used
directly, but it is cleaner to not use it on non-boolean properties.
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/all/20230215215547.691573-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 171eb6f71e9e ("ASoC: meson: meson-card-utils: use of_property_present() for DT parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Walle <michael@walle.cc>
Date: Tue Jan 18 18:35:03 2022 +0100
of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
[ Upstream commit 2ca42c3ad9ed875b136065b010753a4caaaa1d38 ]
We can get rid of all the empty stubs because all these functions call
of_property_read_variable_u{8,16,32,64}_array() which already have an
empty stub if CONFIG_OF is not defined.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220118173504.2867523-3-michael@walle.cc
Stable-dep-of: 171eb6f71e9e ("ASoC: meson: meson-card-utils: use of_property_present() for DT parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Mon Apr 21 16:15:19 2025 -0700
ovl: Check for NULL d_inode() in ovl_dentry_upper()
[ Upstream commit 8a39f1c870e9d6fbac5638f3a42a6a6363829c49 ]
In ovl_path_type() and ovl_is_metacopy_dentry() GCC notices that it is
possible for OVL_E() to return NULL (which implies that d_inode(dentry)
may be NULL). This would result in out of bounds reads via container_of(),
seen with GCC 15's -Warray-bounds -fdiagnostics-details. For example:
In file included from arch/x86/include/generated/asm/rwonce.h:1,
from include/linux/compiler.h:339,
from include/linux/export.h:5,
from include/linux/linkage.h:7,
from include/linux/fs.h:5,
from fs/overlayfs/util.c:7:
In function 'ovl_upperdentry_dereference',
inlined from 'ovl_dentry_upper' at ../fs/overlayfs/util.c:305:9,
inlined from 'ovl_path_type' at ../fs/overlayfs/util.c:216:6:
include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'struct inode[7486503276667837]' [-Werror=array-bounds=]
44 | #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:50:9: note: in expansion of macro '__READ_ONCE'
50 | __READ_ONCE(x); \
| ^~~~~~~~~~~
fs/overlayfs/ovl_entry.h:195:16: note: in expansion of macro 'READ_ONCE'
195 | return READ_ONCE(oi->__upperdentry);
| ^~~~~~~~~
'ovl_path_type': event 1
185 | return inode ? OVL_I(inode)->oe : NULL;
'ovl_path_type': event 2
Avoid this by allowing ovl_dentry_upper() to return NULL if d_inode() is
NULL, as that means the problematic dereferencing can never be reached.
Note that this fixes the over-eager compiler warning in an effort to
being able to enable -Warray-bounds globally. There is no known
behavioral bug here.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Date: Thu Jun 12 11:14:48 2025 +0200
pinctrl: qcom: msm: mark certain pins as invalid for interrupts
commit 93712205ce2f1fb047739494c0399a26ea4f0890 upstream.
On some platforms, the UFS-reset pin has no interrupt logic in TLMM but
is nevertheless registered as a GPIO in the kernel. This enables the
user-space to trigger a BUG() in the pinctrl-msm driver by running, for
example: `gpiomon -c 0 113` on RB2.
The exact culprit is requesting pins whose intr_detection_width setting
is not 1 or 2 for interrupts. This hits a BUG() in
msm_gpio_irq_set_type(). Potentially crashing the kernel due to an
invalid request from user-space is not optimal, so let's go through the
pins and mark those that would fail the check as invalid for the irq chip
as we should not even register them as available irqs.
This function can be extended if we determine that there are more
corner-cases like this.
Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612091448.41546-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Thompson <davthompson@nvidia.com>
Date: Fri Jun 13 21:46:08 2025 +0000
platform/mellanox: mlxbf-tmfifo: fix vring_desc.len assignment
[ Upstream commit 109f4d29dade8ae5b4ac6325af9d1bc24b4230f8 ]
Fix warnings reported by sparse, related to incorrect type:
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types)
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/
Fixes: 78034cbece79 ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Madhavan Srinivasan <maddy@linux.ibm.com>
Date: Sat May 17 19:52:37 2025 +0530
powerpc: Fix struct termio related ioctl macros
[ Upstream commit ab107276607af90b13a5994997e19b7b9731e251 ]
Since termio interface is now obsolete, include/uapi/asm/ioctls.h
has some constant macros referring to "struct termio", this caused
build failure at userspace.
In file included from /usr/include/asm/ioctl.h:12,
from /usr/include/asm/ioctls.h:5,
from tst-ioctls.c:3:
tst-ioctls.c: In function 'get_TCGETA':
tst-ioctls.c:12:10: error: invalid application of 'sizeof' to incomplete type 'struct termio'
12 | return TCGETA;
| ^~~~~~
Even though termios.h provides "struct termio", trying to juggle definitions around to
make it compile could introduce regressions. So better to open code it.
Reported-by: Tulio Magno <tuliom@ascii.art.br>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Closes: https://lore.kernel.org/linuxppc-dev/8734dji5wl.fsf@ascii.art.br/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250517142237.156665-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric W. Biederman <ebiederm@xmission.com>
Date: Thu Feb 20 11:17:28 2020 -0600
proc: Clear the pieces of proc_inode that proc_evict_inode cares about
[ Upstream commit 71448011ea2a1cd36d8f5cbdab0ed716c454d565 ]
This just keeps everything tidier, and allows for using flags like
SLAB_TYPESAFE_BY_RCU where slabs are not always cleared before reuse.
I don't see reuse without reinitializing happening with the proc_inode
but I had a false alarm while reworking flushing of proc dentries and
indoes when a process dies that caused me to tidy this up.
The code is a little easier to follow and reason about this
way so I figured the changes might as well be kept.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Stable-dep-of: b969f9614885 ("fix proc_sys_compare() handling of in-lookup dentries")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Date: Fri Jul 4 19:27:27 2025 +0200
pwm: mediatek: Ensure to disable clocks in error path
commit 505b730ede7f5c4083ff212aa955155b5b92e574 upstream.
After enabling the clocks each error path must disable the clocks again.
One of them failed to do so. Unify the error paths to use goto to make it
harder for future changes to add a similar bug.
Fixes: 7ca59947b5fc ("pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172728.626815-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
[ukleinek: backported to 5.15.y]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Leon Romanovsky <leon@kernel.org>
Date: Tue Jun 30 13:18:52 2020 +0300
RDMA/core: Create and destroy counters in the ib_core
[ Upstream commit 3b023e1b680a56e84c22d43486875a5aa4c78afe ]
Move allocation and destruction of counters under ib_core responsibility
Link: https://lore.kernel.org/r/20200630101855.368895-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: acd245b1e33f ("RDMA/mlx5: Fix CC counters query for MPV")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Weihang Li <liweihang@huawei.com>
Date: Fri May 28 17:37:32 2021 +0800
RDMA/core: Use refcount_t instead of atomic_t on refcount of iwcm_id_private
[ Upstream commit 60dff56d77292062789232f68354f567e1ccf1d2 ]
The refcount_t API will WARN on underflow and overflow of a reference
counter, and avoid use-after-free risks.
Link: https://lore.kernel.org/r/1622194663-2383-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 6883b680e703 ("RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Date: Sat May 10 19:10:36 2025 +0900
RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
[ Upstream commit 6883b680e703c6b2efddb4e7a8d891ce1803d06b ]
The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last
deref") simplified cm_id resource management by freeing cm_id once all
references to the cm_id were removed. The references are removed either
upon completion of iw_cm event handlers or when the application destroys
the cm_id. This commit introduced the use-after-free condition where
cm_id_private object could still be in use by event handler works during
the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a
use-after-free related to destroying CM IDs") addressed this use-after-
free by flushing all pending works at the cm_id destruction.
However, still another use-after-free possibility remained. It happens
with the work objects allocated for each cm_id_priv within
alloc_work_entries() during cm_id creation, and subsequently freed in
dealloc_work_entries() once all references to the cm_id are removed.
If the cm_id's last reference is decremented in the event handler work,
the work object for the work itself gets removed, and causes the use-
after-free BUG below:
BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250
Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091
CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Workqueue: 0x0 (iw_cm_wq)
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x90
print_report+0x174/0x554
? __virt_addr_valid+0x208/0x430
? __pwq_activate_work+0x1ff/0x250
kasan_report+0xae/0x170
? __pwq_activate_work+0x1ff/0x250
__pwq_activate_work+0x1ff/0x250
pwq_dec_nr_in_flight+0x8c5/0xfb0
process_one_work+0xc11/0x1460
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5ef/0xfd0
? __pfx_worker_thread+0x10/0x10
kthread+0x3b0/0x770
? __pfx_kthread+0x10/0x10
? rcu_is_watching+0x11/0xb0
? _raw_spin_unlock_irq+0x24/0x50
? rcu_is_watching+0x11/0xb0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 147416:
kasan_save_stack+0x2c/0x50
kasan_save_track+0x10/0x30
__kasan_kmalloc+0xa6/0xb0
alloc_work_entries+0xa9/0x260 [iw_cm]
iw_cm_connect+0x23/0x4a0 [iw_cm]
rdma_connect_locked+0xbfd/0x1920 [rdma_cm]
nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma]
cma_cm_event_handler+0xae/0x320 [rdma_cm]
cma_work_handler+0x106/0x1b0 [rdma_cm]
process_one_work+0x84f/0x1460
worker_thread+0x5ef/0xfd0
kthread+0x3b0/0x770
ret_from_fork+0x30/0x70
ret_from_fork_asm+0x1a/0x30
Freed by task 147091:
kasan_save_stack+0x2c/0x50
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kfree+0x13a/0x4b0
dealloc_work_entries+0x125/0x1f0 [iw_cm]
iwcm_deref_id+0x6f/0xa0 [iw_cm]
cm_work_handler+0x136/0x1ba0 [iw_cm]
process_one_work+0x84f/0x1460
worker_thread+0x5ef/0xfd0
kthread+0x3b0/0x770
ret_from_fork+0x30/0x70
ret_from_fork_asm+0x1a/0x30
Last potentially related work creation:
kasan_save_stack+0x2c/0x50
kasan_record_aux_stack+0xa3/0xb0
__queue_work+0x2ff/0x1390
queue_work_on+0x67/0xc0
cm_event_handler+0x46a/0x820 [iw_cm]
siw_cm_upcall+0x330/0x650 [siw]
siw_cm_work_handler+0x6b9/0x2b20 [siw]
process_one_work+0x84f/0x1460
worker_thread+0x5ef/0xfd0
kthread+0x3b0/0x770
ret_from_fork+0x30/0x70
ret_from_fork_asm+0x1a/0x30
This BUG is reproducible by repeating the blktests test case nvme/061
for the rdma transport and the siw driver.
To avoid the use-after-free of cm_id_private work objects, ensure that
the last reference to the cm_id is decremented not in the event handler
works, but in the cm_id destruction context. For that purpose, move
iwcm_deref_id() call from destroy_cm_id() to the callers of
destroy_cm_id(). In iw_destroy_cm_id(), call iwcm_deref_id() after
flushing the pending works.
During the fix work, I noticed that iw_destroy_cm_id() is called from
cm_work_handler() and process_event() context. However, the comment of
iw_destroy_cm_id() notes that the function "cannot be called by the
event thread". Drop the false comment.
Closes: https://lore.kernel.org/linux-rdma/r5676e754sv35aq7cdsqrlnvyhiq5zktteaurl7vmfih35efko@z6lay7uypy3c/
Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://patch.msgid.link/20250510101036.1756439-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrisious Haddad <phaddad@nvidia.com>
Date: Mon Jun 16 12:14:53 2025 +0300
RDMA/mlx5: Fix CC counters query for MPV
[ Upstream commit acd245b1e33fc4b9d0f2e3372021d632f7ee0652 ]
In case, CC counters are querying for the second port use the correct
core device for the query instead of always using the master core device.
Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/9cace74dcf106116118bebfa9146d40d4166c6b0.1750064969.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrisious Haddad <phaddad@nvidia.com>
Date: Sat Jul 12 04:37:18 2025 -0400
RDMA/mlx5: Fix vport loopback for MPV device
[ Upstream commit a9a9e68954f29b1e197663f76289db4879fd51bb ]
Always enable vport loopback for both MPV devices on driver start.
Previously in some cases related to MPV RoCE, packets weren't correctly
executing loopback check at vport in FW, since it was disabled.
Due to complexity of identifying such cases for MPV always enable vport
loopback for both GVMIs when binding the slave to the master port.
Fixes: 0042f9e458a5 ("RDMA/mlx5: Enable vport loopback when user context or QP mandate")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/d4298f5ebb2197459e9e7221c51ecd6a34699847.1750064969.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Zhang <markzhang@nvidia.com>
Date: Tue Jun 17 11:13:55 2025 +0300
RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert
[ Upstream commit 8edab8a72d67742f87e9dc2e2b0cdfddda5dc29a ]
The obj_event may be loaded immediately after inserted, then if the
list_head is not initialized then we may get a poisonous pointer. This
fixes the crash below:
mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced)
mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056
mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0
mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps
IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000
[0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E)
[last unloaded: mst_pci]
CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G OE K 5.10.134-13.1.an8.aarch64 #1
Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023
pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--)
pc : dispatch_event_fd+0x68/0x300 [mlx5_ib]
lr : devx_event_notifier+0xcc/0x228 [mlx5_ib]
sp : ffff80001005bcf0
x29: ffff80001005bcf0 x28: 0000000000000001
x27: ffff244e0740a1d8 x26: ffff244e0740a1d0
x25: ffffda56beff5ae0 x24: ffffda56bf911618
x23: ffff244e0596a480 x22: ffff244e0596a480
x21: ffff244d8312ad90 x20: ffff244e0596a480
x19: fffffffffffffff0 x18: 0000000000000000
x17: 0000000000000000 x16: ffffda56be66d620
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000040 x10: ffffda56bfcafb50
x9 : ffffda5655c25f2c x8 : 0000000000000010
x7 : 0000000000000000 x6 : ffff24545a2e24b8
x5 : 0000000000000003 x4 : ffff80001005bd28
x3 : 0000000000000000 x2 : 0000000000000000
x1 : ffff244e0596a480 x0 : ffff244d8312ad90
Call trace:
dispatch_event_fd+0x68/0x300 [mlx5_ib]
devx_event_notifier+0xcc/0x228 [mlx5_ib]
atomic_notifier_call_chain+0x58/0x80
mlx5_eq_async_int+0x148/0x2b0 [mlx5_core]
atomic_notifier_call_chain+0x58/0x80
irq_int_handler+0x20/0x30 [mlx5_core]
__handle_irq_event_percpu+0x60/0x220
handle_irq_event_percpu+0x3c/0x90
handle_irq_event+0x58/0x158
handle_fasteoi_irq+0xfc/0x188
generic_handle_irq+0x34/0x48
...
Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://patch.msgid.link/r/3ce7f20e0d1a03dc7de6e57494ec4b8eaf1f05c2.1750147949.git.leon@kernel.org
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jerome Neanne <jneanne@baylibre.com>
Date: Thu Sep 29 15:25:25 2022 +0200
regulator: gpio: Add input_supply support in gpio_regulator_config
[ Upstream commit adfdfcbdbd32b356323a3db6d3a683270051a7e6 ]
This is simillar as fixed-regulator.
Used to extract regulator parent from the device tree.
Without that property used, the parent regulator can be shut down (if not an always on).
Thus leading to inappropriate behavior:
On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20220929132526.29427-2-jneanne@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: c9764fd88bc7 ("regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Thu Jul 3 16:05:49 2025 +0530
regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods
[ Upstream commit c9764fd88bc744592b0604ccb6b6fc1a5f76b4e3 ]
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable.
Cc: stable@vger.kernel.org # 5.0
Fixes: d6cd33ad7102 ("regulator: gpio: Convert to use descriptors")
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Jul 3 12:54:55 2025 +0200
Revert "ACPI: battery: negate current when discharging"
commit de1675de39aa945bad5937d1fde4df3682670639 upstream.
Revert commit 234f71555019 ("ACPI: battery: negate current when
discharging") breaks not one but several userspace implementations
of battery monitoring: Steam and MangoHud. Perhaps it breaks more,
but those are the two that have been tested.
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Closes: https://lore.kernel.org/linux-acpi/87C1B2AF-D430-4568-B620-14B941A8ABA4@linux.dev/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ulf Hansson <ulf.hansson@linaro.org>
Date: Tue Jun 24 13:09:32 2025 +0200
Revert "mmc: sdhci: Disable SD card clock before changing parameters"
commit dcc3bcfc5b50c625b475dcc25d167b6b947a6637 upstream.
It has turned out the trying to strictly conform to the SDHCI specification
is causing problems. Let's revert and start over.
This reverts commit fb3bbc46c94f261b6156ee863c1b06c84cf157dc.
Cc: Erick Shepherd <erick.shepherd@ni.com>
Cc: stable@vger.kernel.org
Fixes: fb3bbc46c94f ("mmc: sdhci: Disable SD card clock before changing parameters")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Jonathan Liu <net147@gmail.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Closes: https://bugs.debian.org/1108065
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250624110932.176925-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kohei Enju <enjuk@amazon.com>
Date: Sun Jun 29 12:06:31 2025 +0900
rose: fix dangling neighbour pointers in rose_rt_device_down()
[ Upstream commit 34a500caf48c47d5171f4aa1f237da39b07c6157 ]
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
Reported-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e04e2c007ba2c80476cb
Tested-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629030833.6680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Howells <dhowells@redhat.com>
Date: Tue Jul 8 22:15:04 2025 +0100
rxrpc: Fix oops due to non-existence of prealloc backlog struct
commit 880a88f318cf1d2a0f4c0a7ff7b07e2062b434a4 upstream.
If an AF_RXRPC service socket is opened and bound, but calls are
preallocated, then rxrpc_alloc_incoming_call() will oops because the
rxrpc_backlog struct doesn't get allocated until the first preallocation is
made.
Fix this by returning NULL from rxrpc_alloc_incoming_call() if there is no
backlog struct. This will cause the incoming call to be aborted.
Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Suggested-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250708211506.2699012-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Wed Jan 22 19:54:27 2025 -0700
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
commit 3b8b80e993766dc96d1a1c01c62f5d15fafc79b9 upstream.
GCC changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, there are certain
places in the s390 code that use their own CFLAGS without a '-std='
value, which break with this dialect change because of the kernel's own
definitions of bool, false, and true conflicting with the C23 reserved
keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add '-std=gnu11' to the decompressor and purgatory CFLAGS to eliminate
these errors and make the C standard version of these areas match the
rest of the kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250122-s390-fix-std-for-gcc-15-v1-1-8b00cadee083@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Wed Jun 18 09:17:37 2025 +0200
scsi: qla4xxx: Fix missing DMA mapping error in qla4xxx_alloc_pdu()
[ Upstream commit 00f452a1b084efbe8dcb60a29860527944a002a1 ]
dma_map_XXX() can fail and should be tested for errors with
dma_mapping_error().
Fixes: b3a271a94d00 ("[SCSI] qla4xxx: support iscsiadm session mgmt")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250618071742.21822-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bart Van Assche <bvanassche@acm.org>
Date: Mon Jul 7 13:26:05 2025 -0400
scsi: ufs: core: Fix spelling of a sysfs attribute name
[ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ]
Change "resourse" into "resource" in the name of a sysfs attribute.
Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: James Clark <james.clark@linaro.org>
Date: Fri Jun 27 11:21:37 2025 +0100
spi: spi-fsl-dspi: Clear completion counter before initiating transfer
[ Upstream commit fa60c094c19b97e103d653f528f8d9c178b6a5f5 ]
In target mode, extra interrupts can be received between the end of a
transfer and halting the module if the host continues sending more data.
If the interrupt from this occurs after the reinit_completion() then the
completion counter is left at a non-zero value. The next unrelated
transfer initiated by userspace will then complete immediately without
waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering
values are cleared. This is done after clearing the FIFOs and the
status register but before the transfer is initiated, so no interrupts
should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Wed Mar 18 02:15:59 2020 +0200
spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path
[ Upstream commit 826b3a6a34619b934cdc33eeb961fcb99ce92c09 ]
Interrupts are not necessary for DMA functionality, since the completion
event is provided by the DMA driver.
But if the driver fails to request the IRQ defined in the device tree,
it will call dspi_poll which would make the driver hang waiting for data
to become available in the RX FIFO.
Fixes: c55be3059159 ("spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200318001603.9650-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: fa60c094c19b ("spi: spi-fsl-dspi: Clear completion counter before initiating transfer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Thu Mar 5 00:00:37 2020 +0200
spi: spi-fsl-dspi: Rename fifo_{read,write} and {tx,cmd}_fifo_write
[ Upstream commit 547248fbed23f3cd2f6a5937b44fad60993640c4 ]
These function names are very generic and it is easy to get confused.
Rename them after the hardware register that they are accessing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-6-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: fa60c094c19b ("spi: spi-fsl-dspi: Clear completion counter before initiating transfer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Mon Jun 9 14:13:14 2025 -0700
staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
commit a55bc4ffc06d8c965a7d6f0a01ed0ed41380df28 upstream.
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with older versions of clang (15 through 17) show an
instance of -Wframe-larger-than (which breaks the build with
CONFIG_WERROR=y):
drivers/staging/rtl8723bs/core/rtw_security.c:1287:5: error: stack frame size (2208) exceeds limit (2048) in 'rtw_aes_decrypt' [-Werror,-Wframe-larger-than]
1287 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
| ^
This comes from aes_decipher() being inlined in rtw_aes_decrypt().
Running the same build with CONFIG_FRAME_WARN=128 shows aes_cipher()
also uses a decent amount of stack, just under the limit of 2048:
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1952) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
-Rpass-analysis=stack-frame-layout only shows one large structure on the
stack, which is the ctx variable inlined from aes128k128d(). A good
number of the other variables come from the additional checks of
fortified string routines, which are present in memset(), which both
aes_cipher() and aes_decipher() use to initialize some temporary
buffers. In this case, since the size is known at compile time, these
additional checks should not result in any code generation changes but
allmodconfig has several sanitizers enabled, which may make it harder
for the compiler to eliminate the compile time checks and the variables
that come about from them.
The memset() calls are just initializing these buffers to zero, so use
'= {}' instead, which is used all over the kernel and does the exact
same thing as memset() without the fortify checks, which drops the stack
usage of these functions by a few hundred kilobytes.
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1584) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
drivers/staging/rtl8723bs/core/rtw_security.c:1271:5: warning: stack frame size (1456) exceeds limit (128) in 'rtw_aes_decrypt' [-Wframe-larger-than]
1271 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
| ^
Cc: stable@vger.kernel.org
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250609-rtl8723bs-fix-clang-arm64-wflt-v1-1-e2accba43def@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Wed Jul 2 01:43:40 2025 +0000
tipc: Fix use-after-free in tipc_conn_close().
[ Upstream commit 667eeab4999e981c96b447a4df5f20bdf5c26f13 ]
syzbot reported a null-ptr-deref in tipc_conn_close() during netns
dismantle. [0]
tipc_topsrv_stop() iterates tipc_net(net)->topsrv->conn_idr and calls
tipc_conn_close() for each tipc_conn.
The problem is that tipc_conn_close() is called after releasing the
IDR lock.
At the same time, there might be tipc_conn_recv_work() running and it
could call tipc_conn_close() for the same tipc_conn and release its
last ->kref.
Once we release the IDR lock in tipc_topsrv_stop(), there is no
guarantee that the tipc_conn is alive.
Let's hold the ref before releasing the lock and put the ref after
tipc_conn_close() in tipc_topsrv_stop().
[0]:
BUG: KASAN: use-after-free in tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165
Read of size 8 at addr ffff888099305a08 by task kworker/u4:3/435
CPU: 0 PID: 435 Comm: kworker/u4:3 Not tainted 4.19.204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1fc/0x2ef lib/dump_stack.c:118
print_address_description.cold+0x54/0x219 mm/kasan/report.c:256
kasan_report_error.cold+0x8a/0x1b9 mm/kasan/report.c:354
kasan_report mm/kasan/report.c:412 [inline]
__asan_report_load8_noabort+0x88/0x90 mm/kasan/report.c:433
tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165
tipc_topsrv_stop net/tipc/topsrv.c:701 [inline]
tipc_topsrv_exit_net+0x27b/0x5c0 net/tipc/topsrv.c:722
ops_exit_list+0xa5/0x150 net/core/net_namespace.c:153
cleanup_net+0x3b4/0x8b0 net/core/net_namespace.c:553
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Allocated by task 23:
kmem_cache_alloc_trace+0x12f/0x380 mm/slab.c:3625
kmalloc include/linux/slab.h:515 [inline]
kzalloc include/linux/slab.h:709 [inline]
tipc_conn_alloc+0x43/0x4f0 net/tipc/topsrv.c:192
tipc_topsrv_accept+0x1b5/0x280 net/tipc/topsrv.c:470
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Freed by task 23:
__cache_free mm/slab.c:3503 [inline]
kfree+0xcc/0x210 mm/slab.c:3822
tipc_conn_kref_release net/tipc/topsrv.c:150 [inline]
kref_put include/linux/kref.h:70 [inline]
conn_put+0x2cd/0x3a0 net/tipc/topsrv.c:155
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff888099305a00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 8 bytes inside of
512-byte region [ffff888099305a00, ffff888099305c00)
The buggy address belongs to the page:
page:ffffea000264c140 count:1 mapcount:0 mapping:ffff88813bff0940 index:0x0
flags: 0xfff00000000100(slab)
raw: 00fff00000000100 ffffea00028b6b88 ffffea0002cd2b08 ffff88813bff0940
raw: 0000000000000000 ffff888099305000 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure")
Reported-by: syzbot+d333febcf8f4bc5f6110@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=27169a847a70550d17be
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250702014350.692213-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Lewalski <jakub.lewalski@nokia.com>
Date: Mon Mar 31 18:06:19 2025 +0200
tty: serial: uartlite: register uart driver in init
[ Upstream commit 6bd697b5fc39fd24e2aa418c7b7d14469f550a93 ]
When two instances of uart devices are probing, a concurrency race can
occur. If one thread calls uart_register_driver function, which first
allocates and assigns memory to 'uart_state' member of uart_driver
structure, the other instance can bypass uart driver registration and
call ulite_assign. This calls uart_add_one_port, which expects the uart
driver to be fully initialized. This leads to a kernel panic due to a
null pointer dereference:
[ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8
[ 8.156982] #PF: supervisor write access in kernel mode
[ 8.156984] #PF: error_code(0x0002) - not-present page
[ 8.156986] PGD 0 P4D 0
...
[ 8.180668] RIP: 0010:mutex_lock+0x19/0x30
[ 8.188624] Call Trace:
[ 8.188629] ? __die_body.cold+0x1a/0x1f
[ 8.195260] ? page_fault_oops+0x15c/0x290
[ 8.209183] ? __irq_resolve_mapping+0x47/0x80
[ 8.209187] ? exc_page_fault+0x64/0x140
[ 8.209190] ? asm_exc_page_fault+0x22/0x30
[ 8.209196] ? mutex_lock+0x19/0x30
[ 8.223116] uart_add_one_port+0x60/0x440
[ 8.223122] ? proc_tty_register_driver+0x43/0x50
[ 8.223126] ? tty_register_driver+0x1ca/0x1e0
[ 8.246250] ulite_probe+0x357/0x4b0 [uartlite]
To prevent it, move uart driver registration in to init function. This
will ensure that uart_driver is always registered when probe function
is called.
Signed-off-by: Jakub Lewalski <jakub.lewalski@nokia.com>
Signed-off-by: Elodie Decerle <elodie.decerle@nokia.com>
Link: https://lore.kernel.org/r/20250331160732.2042-1-elodie.decerle@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tiwei Bie <tiwei.btw@antgroup.com>
Date: Fri Jun 6 20:44:25 2025 +0800
um: ubd: Add missing error check in start_io_thread()
[ Upstream commit c55c7a85e02a7bfee20a3ffebdff7cbeb41613ef ]
The subsequent call to os_set_fd_block() overwrites the previous
return value. OR the two return values together to fix it.
Fixes: f88f0bdfc32f ("um: UBD Improvements")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250606124428.148164-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Fri Mar 21 18:49:49 2025 +0200
usb: Add checks for snprintf() calls in usb_alloc_dev()
[ Upstream commit 82fe5107fa3d21d6c3fba091c9dbc50495588630 ]
When creating a device path in the driver the snprintf() takes
up to 16 characters long argument along with the additional up to
12 characters for the signed integer (as it can't see the actual limits)
and tries to pack this into 16 bytes array. GCC complains about that
when build with `make W=1`:
drivers/usb/core/usb.c:705:25: note: ‘snprintf’ output between 3 and 28 bytes into a destination of size 16
Since everything works until now, let's just check for the potential
buffer overflow and bail out. It is most likely a never happen situation,
but at least it makes GCC happy.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250321164949.423957-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robert Hodaszi <robert.hodaszi@digi.com>
Date: Thu Apr 3 16:40:04 2025 +0200
usb: cdc-wdm: avoid setting WDM_READ for ZLP-s
[ Upstream commit 387602d8a75574fafb451b7a8215e78dfd67ee63 ]
Don't set WDM_READ flag in wdm_in_callback() for ZLP-s, otherwise when
userspace tries to poll for available data, it might - incorrectly -
believe there is something available, and when it tries to non-blocking
read it, it might get stuck in the read loop.
For example this is what glib does for non-blocking read (briefly):
1. poll()
2. if poll returns with non-zero, starts a read data loop:
a. loop on poll() (EINTR disabled)
b. if revents was set, reads data
I. if read returns with EINTR or EAGAIN, goto 2.a.
II. otherwise return with data
So if ZLP sets WDM_READ (#1), we expect data, and try to read it (#2).
But as that was a ZLP, and we are doing non-blocking read, wdm_read()
returns with EAGAIN (#2.b.I), so loop again, and try to read again
(#2.a.).
With glib, we might stuck in this loop forever, as EINTR is disabled
(#2.a).
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250403144004.3889125-1-robert.hodaszi@digi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuen-Han Tsai <khtsai@google.com>
Date: Tue Jun 17 13:07:12 2025 +0800
usb: gadget: u_serial: Fix race condition in TTY wakeup
commit c529c3730bd09115684644e26bf01ecbd7e2c2c9 upstream.
A race condition occurs when gs_start_io() calls either gs_start_rx() or
gs_start_tx(), as those functions briefly drop the port_lock for
usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear
port.tty and port_usb, respectively.
Use the null-safe TTY Port helper function to wake up TTY.
Example
CPU1: CPU2:
gserial_connect() // lock
gs_close() // await lock
gs_start_rx() // unlock
usb_ep_queue()
gs_close() // lock, reset port.tty and unlock
gs_start_rx() // lock
tty_wakeup() // NPE
Fixes: 35f95fd7f234 ("TTY: usb/u_serial, use tty from tty_port")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/linux-usb/20240116141801.396398-1-khtsai@google.com/
Link: https://lore.kernel.org/r/20250617050844.1848232-2-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chen Yufeng <chenyufeng@iie.ac.cn>
Date: Tue Apr 15 14:58:57 2025 +0800
usb: potential integer overflow in usbg_make_tpg()
[ Upstream commit 153874010354d050f62f8ae25cbb960c17633dc5 ]
The variable tpgt in usbg_make_tpg() is defined as unsigned long and is
assigned to tpgt->tport_tpgt, which is defined as u16. This may cause an
integer overflow when tpgt is greater than USHRT_MAX (65535). I
haven't tried to trigger it myself, but it is possible to trigger it
by calling usbg_make_tpg() with a large value for tpgt.
I modified the type of tpgt to match tpgt->tport_tpgt and adjusted the
relevant code accordingly.
This patch is similar to commit 59c816c1f24d ("vhost/scsi: potential
memory corruption").
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://lore.kernel.org/r/20250415065857.1619-1-chenyufeng@iie.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: RD Babiera <rdbabiera@google.com>
Date: Wed Jun 18 22:49:42 2025 +0000
usb: typec: altmodes/displayport: do not index invalid pin_assignments
commit af4db5a35a4ef7a68046883bfd12468007db38f1 upstream.
A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250618224943.3263103-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrei Kuchynski <akuchynski@chromium.org>
Date: Tue Jun 24 13:32:46 2025 +0000
usb: typec: displayport: Fix potential deadlock
commit 099cf1fbb8afc3771f408109f62bdec66f85160e upstream.
The deadlock can occur due to a recursive lock acquisition of
`cros_typec_altmode_data::mutex`.
The call chain is as follows:
1. cros_typec_altmode_work() acquires the mutex
2. typec_altmode_vdm() -> dp_altmode_vdm() ->
3. typec_altmode_exit() -> cros_typec_altmode_exit()
4. cros_typec_altmode_exit() attempts to acquire the mutex again
To prevent this, defer the `typec_altmode_exit()` call by scheduling
it rather than calling it directly from within the mutex-protected
context.
Cc: stable <stable@kernel.org>
Fixes: b4b38ffb38c9 ("usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250624133246.3936737-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jos Wang <joswang@lenovo.com>
Date: Sun Feb 9 15:19:26 2025 +0800
usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode
[ Upstream commit b4b38ffb38c91afd4dc387608db26f6fc34ed40b ]
Although some Type-C DRD devices that do not support the DP Sink
function (such as Huawei Mate 40Pro), the Source Port initiates
Enter Mode CMD, but the device responds to Enter Mode ACK, the
Source port then initiates DP Status Update CMD, and the device
responds to DP Status Update NAK.
As PD2.0 spec ("6.4.4.3.4 Enter Mode Command")，A DR_Swap Message
Shall Not be sent during Modal Operation between the Port Partners.
At this time, the source port initiates DR_Swap message through the
"echo device > /sys/class/typec/port0/data_role" command to switch
the data role from host to device. The device will initiate a Hard
Reset for recovery, resulting in the failure of data role swap.
Therefore, when DP Status Update NAK is received, Exit Mode CMD is
initiated to exit the currently entered DP altmode.
Signed-off-by: Jos Wang <joswang@lenovo.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250209071926.69625-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: George Kennedy <george.kennedy@oracle.com>
Date: Mon Nov 28 15:18:25 2022 -0500
VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF
[ Upstream commit 1a726cb47fd204109c767409fa9ca15a96328f14 ]
The call to get_user_pages_fast() in vmci_host_setup_notify() can return
NULL context->notify_page causing a GPF. To avoid GPF check if
context->notify_page == NULL and return error if so.
general protection fault, probably for non-canonical address
0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x0005088000000300-
0x0005088000000307]
CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1
Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014
RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0
Call Trace:
<TASK>
vmci_host_unlocked_ioctl+0x362/0x1f40
__x64_sys_ioctl+0x1a1/0x230
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1bd6406fb5f3 ("VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notify")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wupeng Ma <mawupeng1@huawei.com>
Date: Sat May 10 11:30:40 2025 +0800
VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notify
[ Upstream commit 1bd6406fb5f36c2bb1e96e27d4c3e9f4d09edde4 ]
During our test, it is found that a warning can be trigger in try_grab_folio
as follow:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1678 at mm/gup.c:147 try_grab_folio+0x106/0x130
Modules linked in:
CPU: 0 UID: 0 PID: 1678 Comm: syz.3.31 Not tainted 6.15.0-rc5 #163 PREEMPT(undef)
RIP: 0010:try_grab_folio+0x106/0x130
Call Trace:
<TASK>
follow_huge_pmd+0x240/0x8e0
follow_pmd_mask.constprop.0.isra.0+0x40b/0x5c0
follow_pud_mask.constprop.0.isra.0+0x14a/0x170
follow_page_mask+0x1c2/0x1f0
__get_user_pages+0x176/0x950
__gup_longterm_locked+0x15b/0x1060
? gup_fast+0x120/0x1f0
gup_fast_fallback+0x17e/0x230
get_user_pages_fast+0x5f/0x80
vmci_host_unlocked_ioctl+0x21c/0xf80
RIP: 0033:0x54d2cd
---[ end trace 0000000000000000 ]---
Digging into the source, context->notify_page may init by get_user_pages_fast
and can be seen in vmci_ctx_unset_notify which will try to put_page. However
get_user_pages_fast is not finished here and lead to following
try_grab_folio warning. The race condition is shown as follow:
cpu0 cpu1
vmci_host_do_set_notify
vmci_host_setup_notify
get_user_pages_fast(uva, 1, FOLL_WRITE, &context->notify_page);
lockless_pages_from_mm
gup_pgd_range
gup_huge_pmd // update &context->notify_page
vmci_host_do_set_notify
vmci_ctx_unset_notify
notify_page = context->notify_page;
if (notify_page)
put_page(notify_page); // page is freed
__gup_longterm_locked
__get_user_pages
follow_trans_huge_pmd
try_grab_folio // warn here
To slove this, use local variable page to make notify_page can be seen
after finish get_user_pages_fast.
Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs")
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/e91da589-ad57-3969-d979-879bbd10dddd@huawei.com/
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Link: https://lore.kernel.org/r/20250510033040.901582-1-mawupeng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefano Garzarella <sgarzare@redhat.com>
Date: Mon Jun 23 12:00:53 2025 +0200
vsock/uapi: fix linux/vm_sockets.h userspace compilation errors
[ Upstream commit 22bbc1dcd0d6785fb390c41f0dd5b5e218d23bdd ]
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: HarshaVardhana S A <harshavardhana.sa@broadcom.com>
Date: Tue Jul 1 14:22:54 2025 +0200
vsock/vmci: Clear the vmci transport packet properly when initializing it
commit 223e2288f4b8c262a864e2c03964ffac91744cd5 upstream.
In vmci_transport_packet_init memset the vmci_transport_packet before
populating the fields to avoid any uninitialised data being left in the
structure.
Cc: Bryan Tan <bryan-bt.tan@broadcom.com>
Cc: Vishnu Dasa <vishnu.dasa@broadcom.com>
Cc: Broadcom internal kernel review list
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: virtualization@lists.linux.dev
Cc: netdev@vger.kernel.org
Cc: stable <stable@kernel.org>
Signed-off-by: HarshaVardhana S A <harshavardhana.sa@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250701122254.2397440-1-gregkh@linuxfoundation.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nicolas Pitre <npitre@baylibre.com>
Date: Tue Jun 10 21:41:44 2025 -0400
vt: add missing notification when switching back to text mode
[ Upstream commit ff78538e07fa284ce08cbbcb0730daa91ed16722 ]
Programs using poll() on /dev/vcsa to be notified when VT changes occur
were missing one case: the switch from gfx to text mode.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Tue Jun 17 11:45:29 2025 +0200
wifi: ath6kl: remove WARN on bad firmware input
[ Upstream commit e7417421d89358da071fd2930f91e67c7128fbff ]
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too.
Reported-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Tested-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250617114529.031a677a348e.I58bf1eb4ac16a82c546725ff010f3f0d2b0cca49@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Mon Jun 16 17:18:38 2025 +0200
wifi: mac80211: drop invalid source address OCB frames
[ Upstream commit d1b1a5eb27c4948e8811cf4dbb05aaf3eb10700c ]
In OCB, don't accept frames from invalid source addresses
(and in particular don't try to create stations for them),
drop the frames instead.
Reported-by: syzbot+8b512026a7ec10dcbdd9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6788d2d9.050a0220.20d369.0028.GAE@google.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: syzbot+8b512026a7ec10dcbdd9@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20250616171838.7433379cab5d.I47444d63c72a0bd58d2e2b67bb99e1fea37eec6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Date: Sat Jun 21 22:32:09 2025 +1000
wifi: mac80211: fix beacon interval calculation overflow
[ Upstream commit 7a3750ff0f2e8fee338a9c168f429f6c37f0e820 ]
As we are converting from TU to usecs, a beacon interval of
100*1024 usecs will lead to integer wrapping. To fix change
to use a u32.
Fixes: 057d5f4ba1e4 ("mac80211: sync dtim_count to TSF")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250621123209.511796-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniil Dulov <d.dulov@aladdin.ru>
Date: Thu Jun 26 14:46:19 2025 +0300
wifi: zd1211rw: Fix potential NULL pointer dereference in zd_mac_tx_to_dev()
[ Upstream commit 74b1ec9f5d627d2bdd5e5b6f3f81c23317657023 ]
There is a potential NULL pointer dereference in zd_mac_tx_to_dev(). For
example, the following is possible:
T0 T1
zd_mac_tx_to_dev()
/* len == skb_queue_len(q) */
while (len > ZD_MAC_MAX_ACK_WAITERS) {
filter_ack()
spin_lock_irqsave(&q->lock, flags);
/* position == skb_queue_len(q) */
for (i=1; i<position; i++)
skb = __skb_dequeue(q)
if (mac->type == NL80211_IFTYPE_AP)
skb = __skb_dequeue(q);
spin_unlock_irqrestore(&q->lock, flags);
skb_dequeue() -> NULL
Since there is a small gap between checking skb queue length and skb being
unconditionally dequeued in zd_mac_tx_to_dev(), skb_dequeue() can return NULL.
Then the pointer is passed to zd_mac_tx_status() where it is dereferenced.
In order to avoid potential NULL pointer dereference due to situations like
above, check if skb is not NULL before passing it to zd_mac_tx_status().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 459c51ad6e1f ("zd1211rw: port to mac80211")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20250626114619.172631-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yazen Ghannam <yazen.ghannam@amd.com>
Date: Tue Jun 24 14:15:59 2025 +0000
x86/mce/amd: Fix threshold limit reset
commit 5f6e3b720694ad771911f637a51930f511427ce1 upstream.
The MCA threshold limit must be reset after servicing the interrupt.
Currently, the restart function doesn't have an explicit check for this. It
makes some assumptions based on the current limit and what's in the registers.
These assumptions don't always hold, so the limit won't be reset in some
cases.
Make the reset condition explicit. Either an interrupt/overflow has occurred
or the bank is being initialized.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-4-236dd74f645f@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yazen Ghannam <yazen.ghannam@amd.com>
Date: Tue Jun 24 14:15:56 2025 +0000
x86/mce: Don't remove sysfs if thresholding sysfs init fails
commit 4c113a5b28bfd589e2010b5fc8867578b0135ed7 upstream.
Currently, the MCE subsystem sysfs interface will be removed if the
thresholding sysfs interface fails to be created. A common failure is due to
new MCA bank types that are not recognized and don't have a short name set.
The MCA thresholding feature is optional and should not break the common MCE
sysfs interface. Also, new MCA bank types are occasionally introduced, and
updates will be needed to recognize them. But likewise, this should not break
the common sysfs interface.
Keep the MCE sysfs interface regardless of the status of the thresholding
sysfs interface.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-1-236dd74f645f@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: JP Kobryn <inwardvessel@gmail.com>
Date: Fri Jun 27 10:49:35 2025 -0700
x86/mce: Make sure CMCI banks are cleared during shutdown on Intel
commit 30ad231a5029bfa16e46ce868497b1a5cdd3c24d upstream.
CMCI banks are not cleared during shutdown on Intel CPUs. As a side effect,
when a kexec is performed, CPUs coming back online are unable to
rediscover/claim these occupied banks which breaks MCE reporting.
Clear the CPU ownership during shutdown via cmci_clear() so the banks can
be reclaimed and MCE reporting will become functional once more.
[ bp: Massage commit message. ]
Reported-by: Aijay Adams <aijay@meta.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250627174935.95194-1-inwardvessel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Wed Jul 2 10:32:04 2025 +0200
x86/mm: Disable hugetlb page table sharing on 32-bit
commit 76303ee8d54bff6d9a6d55997acd88a6c2ba63cf upstream.
Only select ARCH_WANT_HUGE_PMD_SHARE on 64-bit x86.
Page table sharing requires at least three levels because it involves
shared references to PMD tables; 32-bit x86 has either two-level paging
(without PAE) or three-level paging (with PAE), but even with
three-level paging, having a dedicated PGD entry for hugetlb is only
barely possible (because the PGD only has four entries), and it seems
unlikely anyone's actually using PMD sharing on 32-bit.
Having ARCH_WANT_HUGE_PMD_SHARE enabled on non-PAE 32-bit X86 (which
has 2-level paging) became particularly problematic after commit
59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count"),
since that changes `struct ptdesc` such that the `pt_mm` (for PGDs) and
the `pt_share_count` (for PMDs) share the same union storage - and with
2-level paging, PMDs are PGDs.
(For comparison, arm64 also gates ARCH_WANT_HUGE_PMD_SHARE on the
configuration of page tables such that it is never enabled with 2-level
paging.)
Closes: https://lore.kernel.org/r/srhpjxlqfna67blvma5frmy3aa@altlinux.org
Fixes: cfe28c5d63d8 ("x86: mm: Remove x86 version of huge_pmd_share.")
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Vitaly Chikunov <vt@altlinux.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250702-x86-2level-hugetlb-v2-1-1a98096edf92%40google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>