Author: Jiexun Wang <wangjiexun2025@gmail.com>
Date: Wed Jun 24 15:16:48 2026 +0000
af_unix: Reject SIOCATMARK on non-stream sockets
commit d119775f2bad827edc28071c061fdd4a91f889a5 upstream.
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue.
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Martyniuk <alexevgmart@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Date: Mon May 4 15:48:23 2026 +0800
agp/amd64: Fix broken error propagation in agp_amd64_probe()
commit b08472db93b1ccff84a7adec5779d47f0e9d3a30 upstream.
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source.
Fixes: a32073bffc65 ("[PATCH] x86_64: Clean and enhance up K8 northbridge access code")
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.18+
Link: https://patch.msgid.link/20260504074823.99377-1-w15303746062@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:48 2026 +0200
batman-adv: bla: annotate lasttime access with READ/WRITE_ONCE
commit 98b0fb191c878a64cbaebfe231d96d57576acf8c upstream.
The lasttime field for claim, backbone_gw, and loopdetect tracks the
jiffies value of the most recent activity and is used to detect timeouts.
These accesses are not consistently protected by a lock, so
READ_ONCE/WRITE_ONCE must be used to prevent data races caused by compiler
optimizations.
Cc: stable@kernel.org
Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:11:02 2026 +0200
batman-adv: dat: prevent false sharing between VLANs
commit 20d7658b74169f86d4ac01b9185b3eadddf71f28 upstream.
The local hash of DAT entries is supposed to be VLAN (VID) aware. But
the adding to the hash and the search in the hash were not checking the VID
information of the hash entries. The entries would therefore only be
correctly separated when batadv_hash_dat() didn't select the same buckets
for different VIDs.
Cc: stable@kernel.org
Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:51 2026 +0200
batman-adv: ensure bcast is writable before modifying TTL
commit 4cd6d3a4b96a8576f1fed8f9f9f17c2dc2978e0c upstream.
Before batman-adv is allowed to write to an skb, it either has to have its
own copy of the skb or used skb_cow() to ensure that the data part is not
shared.
The old implementation used a shared queue and created copies before
attempting to write to it. But with the new implementation, the broadcast
packet is already modified when it gets received. Potentially writing to
shared buffers in this process.
Adding a skb_cow() right before this operation avoids this and can at the
same time prepare it for the modifications required to rebroadcast the
packet.
Cc: stable@kernel.org
Fixes: 3f69339068f9 ("batman-adv: bcast: queue per interface, if needed")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:52 2026 +0200
batman-adv: fix (m|b)cast csum after decrementing TTL
commit e728bbdf32660c8f32b8f5e8d09427a2c131ad60 upstream.
The broadcast and multicast packets can be received at the same time by the
local system and forwarded to other nodes. Both are simply decrementing the
TTL at the beginning of the receive path - independent of chosen paths
(receive/forward). But such a modification of the data conflicts with the
hw csum. This is not a problem when the packet is directly forwarded but
can cause errors in the local receive path.
Such a problem can then trigger a "hw csum failure". The receiver path must
therefore ensure that the csum is fixed for each modification of the
payload before batadv_interface_rx() is reached.
Since all batman-adv packet types with a ttl have it as u8 at offset 2, a
helper can be used for all of them. But it is only used at the moment for
batadv_bcast_packet and batadv_mcast_packet because they are the only ones
which deliver the packet locally but unconditionally modify the TTL.
Cc: stable@kernel.org
Fixes: 3f69339068f9 ("batman-adv: bcast: queue per interface, if needed")
Fixes: 07afe1ba288c ("batman-adv: mcast: implement multicast packet reception and forwarding")
[ Context, Drop change for non-existing mcast handling ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:54 2026 +0200
batman-adv: frag: avoid underflow of TTL
commit 493d9d2528e1a09b090e4b37f0f553def7bd5ce9 upstream.
Packets with a TTL are using it to limit the amount of time this packet can
be forwarded. But for batadv_frag_packet, the TTL was always only reduced
but it was never evaluated. It could even underflow without any effect.
Check the TTL in batadv_frag_skb_fwd() before attempting to prepare it for
forwarding. This keeps it in sync with the not fragmented unicast packet.
Cc: stable@kernel.org
Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:53 2026 +0200
batman-adv: frag: ensure fragment is writable before modifying TTL
commit b7293c6e8c15b2db77809b25cf8389e35331b27a upstream.
Before batman-adv is allowed to write to an skb, it either has to have its
own copy of the skb or use skb_cow() to ensure that the data part is not
shared. But batadv_frag_skb_fwd() modifies the TTL even when it is shared.
Adding a skb_cow() right before this operation avoids this and can at the
same time prepare it for the modifications required to forward the
fragment.
Cc: stable@kernel.org
Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:49 2026 +0200
batman-adv: prevent ELP transmission interval underflow
commit 5e50d4b8ae3ea622122d3c6a38d7f6fe68dfddca upstream.
batadv_v_elp_start_timer() enqeues a delayed work. The time when it starts
is randomly chosen between (elp_interval - BATADV_JITTER) and
(elp_interval + BATADV_JITTER). The configured elp_interval must therefore
be larger or equal to BATADV_JITTER to avoid that it causes an underflow of
the unsigned integer. If this would happen, then a "fast" ELP interval
would turn into a "day long" delay.
At the same time, it must not be larger than the maximum value the variable
can store.
Cc: stable@kernel.org
Fixes: a10800829040 ("batman-adv: Add elp_interval hardif genl configuration")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:47 2026 +0200
batman-adv: tp_meter: add only finished tp_vars to lists
commit 15ccbf685222274f5add1387af58c2a41a95f81e upstream.
When the receiver variables (aka "session") are initialized, then they are
added to the list of sessions before the timer is set up. A RCU protected
reader could therefore find the entry and run mod_setup before
batadv_tp_init_recv() finished the timer initialization.
The same is true for batadv_tp_start(), which must first initialize the
finish_work and the test_length to avoid a similar problem.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:57 2026 +0200
batman-adv: tp_meter: annotate last_recv_time access with READ/WRITE_ONCE
commit d67c728f07fca2ee6ffdc6dd4421cf2e8691f4d1 upstream.
The last_recv_time field for batadv_tp_receiver tracks the jiffies value of
the most recent activity and is used to detect timeouts. These accesses are
not consistently protected by a lock, so READ_ONCE/WRITE_ONCE must be used
to prevent data races caused by compiler optimizations.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:44 2026 +0200
batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd
commit 33ccd52f3cc9ed46ce395199f89aa3234dc83314 upstream.
The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in
batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics.
((mss * 8) ** 2) / (cwnd * 8)
In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the
left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around
and be 0 - resulting in:
((mss * 8) ** 2) / 0
This is of course invalid and cannot be calculated. The calculation should
must be simplified to avoid this overflow:
(mss ** 2) * 8 / cwnd
It will keep the precision enhancement from the scaling (by 8) but avoid
the overflow in the divisor.
In theory, there could still be an overflow in the dividend. It is at the
moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an
imminent problem. But allowing it to use the whole u32 bit range, would
mean that it can still use up to 67 bits. To keep this calculation safe for
32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits -
or in other words: must never be larger than 16383.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:43 2026 +0200
batman-adv: tp_meter: avoid window underflow
commit 765947b81fb54b6ebb0bc1cfe55c0fa399e002b8 upstream.
In batadv_tp_avail(), win_left is calculated with 32-bit unsigned
arithmetic: win_left = win_limit - tp_vars->last_sent;
During Fast Recovery, cwnd is inflated and last_sent advances rapidly. When
Fast Recovery ends, cwnd drops abruptly back to ss_threshold. If the newly
shrunk win_limit is less than last_sent, the unsigned subtraction will
underflow, wrapping to a massive positive value. Instead of returning that
the window is full (unavailable), it returns that the sender can continue
sending.
To handle this situation, it must be checked whether the windows end
sequence number (win_limit) has to be compared with the last sent sequence
number. If it would be before the last sent sequence number, then more acks
are needed before the transmission can be started again.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:45 2026 +0200
batman-adv: tp_meter: fix fast recovery precondition
commit 2b0d08f08ed3b2174f05c43089ec65f3543a025b upstream.
The fast recovery precondition checks if the recover (initialized to
BATADV_TP_FIRST_SEQ) is bigger than the received ack. But since recover is
only updated when this check is successful, it will never enter the fast
recovery mode.
According to RFC6582 Section 3.2 step 2, the check should actually be
different:
> When the third duplicate ACK is received, the TCP sender first
> checks the value of recover to see if the Cumulative
> Acknowledgment field covers more than recover
The precondition must therefore check if recover is smaller than the
received ack - basically swapping the operands of the current check.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:59 2026 +0200
batman-adv: tp_meter: handle overlapping packets
commit cbde75c38b21f022891525078622587ad557b7c1 upstream.
If the size of the packets would change during the transmission, it could
happen that some retries of packets are overlapping. In this case, precise
comparisons of sequence numbers by the receiver would be wrong. It is then
necessary to check if the start sequence number to the end sequence number
("seqno + length") would contain a new range.
If this is the case then this is enough to accept this packet. In all other
cases, the packet still has to be dropped (and not acked).
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
[ Switch to pre-splitted tp_vars structure names ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:46 2026 +0200
batman-adv: tp_meter: handle seqno wrap-around for fast recovery detection
commit f54c85ed42a1b27a516cf2a4728f5a612b799e07 upstream.
The recover variable and the last_sent sequence number are initialized on
purpose as a really high value which will wrap-around after the first 2000
bytes. The fast recovery precondition must therefore not use simple integer
comparisons but use helpers which are aware of the sequence number
wrap-arounds.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:42 2026 +0200
batman-adv: tp_meter: initialize dec_cwnd explicitly
commit febfb1b86224489535312296ecfa3d4bf467f339 upstream.
When batadv_tp_update_cwnd() is called, dec_cwnd is increased. But dec_cwnd
is only initialixed (to 0) when a duplicate Ack was received or when cwnd
is below the ss_threshold.
Just initialize the cwnd during the initialization to avoid any potential
access of uninitialized data.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:41 2026 +0200
batman-adv: tp_meter: initialize dup_acks explicitly
commit b2b68b32a715e0328662801576974aa37b942b00 upstream.
When an ack with a sequence number equal to the last_acked is received, the
dup_acks counter is increased to decide whether fast retransmit should be
performed. Only when the sequence numbers are not equal, the dup_acks is
set to the initial value (0).
But if the initial packet would have the sequence number
BATADV_TP_FIRST_SEQ, dup_acks would not be initialized and atomic_inc would
operate on an undefined starting value. It is therefore required to have it
explicitly initialized during the start of the sender session.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:50 2026 +0200
batman-adv: tp_meter: initialize last_recv_time during init
commit 811cb00fa8cdc3f0a7f6eefc000a6888367c8c8f upstream.
The last_recv_time is the most important indicator for a receiver session
to figure out whether a session timed out or not. But this information was
only initialized after the session was added to the tp_receiver_list and
after the timer was started.
In the worst case, the timer (function) could have tried to access this
information before the actual initialization was reached. Like rest of the
variables of the tp_meter receiver session, this field has to be filled out
before any other (parallel running) context has the chance to access it.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:40 2026 +0200
batman-adv: tp_meter: keep unacked list in ascending ordered
commit 5aa8651527ea0b610e7a09fb3b8204c1398b9525 upstream.
When batadv_tp_handle_out_of_order inserts a new entry in the list of
unacked (out of order) packets, it searches from the entry with the newest
sequence number towards oldest sequence number. If an entry is found which
is older than the newly entry, the new entry has to be added after the
found one to keep the ascending order.
But for this operation list_add_tail() was used. But this function adds an
entry _before_ another one. As result, the list would contain a lot of
swapped sequence numbers. The consumer of this list
(batadv_tp_ack_unordered()) would then fail to correctly ack packets.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:58 2026 +0200
batman-adv: tp_meter: prevent parallel modifications of last_recv
commit 6dde0cfcb36e4d5b3de35b75696937478441eed4 upstream.
When last_recv is updated to store the last receive sequence number, it is
assuming that nothing is modifying in parallel while:
* check for outdated packets is done
* out of order check is performed (and packets are stored in out-of-order
queue)
* the out-of-order queue was searched for closed gaps
* sequence number for next ack is calculated
Nothing of that was actually protected. It could therefore happen that the
last_recv was updated multiple times in parallel and the final sequence
number was calculated with deltas which had no connection to the sequence
number they were added to.
Lock this whole region with the same lock which was already used to protect
the unacked (out-of-order) list.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
[ Switch to pre-splitted tp_vars structure names ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:56 2026 +0200
batman-adv: tp_meter: restrict number of unacked list entries
commit e7c775110e1858e5a7471a23a9c9658c0af9df89 upstream.
When the unacked_list is unbound, an attacker could send messages with
small lengths and appropriated seqno + gaps to force the receiver to
allocate more and more unacked_list entries. And the end either causing an
out-of-memory situation or increase the management overhead for the (large)
list that significant portions of CPU cycles are wasted in searching
through the list.
When limiting the list to a specific number, it is important to still
correctly add a new entry to the list. But if the list became larger than
the limit, the last entry of the list (with the highest seqno) must be
dropped to still allow the earlier seqnos to finish and therefore to
continue the process. Otherwise, the process might get stuck with too high
seqnos which are not handled by batadv_tp_ack_unordered().
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
[ Switch to pre-splitted tp_vars structure names ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:11:00 2026 +0200
batman-adv: tt: don't merge change entries with different VIDs
commit f08e06c2d5c3e2434e7c773f2213f4a7dce6bc1e upstream.
batadv_tt_local_event() merges/cancels events for the same client which
would conflict or be duplicates. The matching of the queued events only
compares the MAC address - the VLAN ID stored in each event is ignored.
If a MAC would now appear on multiple VID, the two ADD change events (for
VID 1 and VID 2) would be merged to a single vid event. The remote can
therefore not calculate the correct TT table and desync. A full translation
table exchange is required to recover from this state.
A check of VID is therefore necessary to avoid such wrong merges/cancels.
Cc: stable@kernel.org
Fixes: c018ad3de61a ("batman-adv: add the VLAN ID attribute to the TT entry")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri May 29 22:03:23 2026 +0200
batman-adv: tt: prevent TVLV entry number overflow
commit 99d9958fa10fb684b2a8e2c48a8d704122721420 upstream.
The helpers to prepare the buffers for the local and global TT based
replies are trying to sum up all TT entries which can be found for each
VLAN. In theory, this sum can be too big for an u16 and therefore overflow.
A too small buffer would then be allocated for the TVLV.
The too small buffer will be handled gracefully by
batadv_tt_tvlv_generate() and is not causing a buffer overflow - just a
truncated reply. But this overflow shouldn't have happened in the first and
the too small buffer should never have been allocated when an overflow was
detected.
Cc: stable@kernel.org
Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri May 29 22:02:01 2026 +0200
batman-adv: tt: reject oversized local TVLV buffers
commit 1e9fab756f8395096d5bba7be0c373c4c8f5d165 upstream.
The commit 3a359bf5c61d ("batman-adv: reject oversized global TT response
buffers") added a check to ensure that a global return buffer size can be
stored in an u16. The same buffer handling also exists for the local data
buffer but was not touched.
A similar check should be also be in place for the local TVLV buffer. It
doesn't have the similar attack surface because it is only generated from
locally discovered MAC addresses but the dynamic nature could still cause
temporarily to large buffers.
Cc: stable@kernel.org
Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:11:01 2026 +0200
batman-adv: tt: track roam count per VID
commit 12407d5f61c2653a64f2ff4b22f3c267f8420ef1 upstream.
batadv_tt_check_roam_count() is supposed to track roaming of a TT entry.
But TT entries are for a MAC + VID. The VID was completely missed and thus
leads to incorrect detection of ROAM counts when a client MAC exists in
multiple VLANs.
Cc: stable@kernel.org
Fixes: c018ad3de61a ("batman-adv: add the VLAN ID attribute to the TT entry")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:11:04 2026 +0200
batman-adv: tvlv: avoid race of cifsnotfound handler state
commit edb557b2ba38fea2c5eb710cf366c797e187218c upstream.
TVLV handlers can have the flag BATADV_TVLV_HANDLER_OGM_CIFNOTFND set to
signal that the OGM handler should be called (with NULL for data) when the
specific TVLV container was not found in the OGM. This is used by:
* DAT
* GW
* Multicast (OGM + Tracker)
The state whether the handler was executed was stored in the struct
batadv_tvlv_handler. But the TVLV processing is started without any lock.
Multiple parallel contexts processing TVLVs would therefore overwrite each
others BATADV_TVLV_HANDLER_OGM_CALLED flag in the shared
batadv_tvlv_handler.
Drop the shared BATADV_TVLV_HANDLER_OGM_CALLED flag and instead determine,
per TVLV buffer, whether a matching container was present by scanning the
packet's buffer.
Cc: stable@kernel.org
Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:11:03 2026 +0200
batman-adv: tvlv: enforce 2-byte alignment
commit 32a6799255525d6ea4da0f7e9e0e521ad9560a46 upstream.
The fields of an aggregated OGM(v2) are accessed assuming (at least) 2-byte
alignment, so a following OGM must start at an even offset. As the header
length is even, an odd tvlv_len would misalign it and trigger unaligned
accesses on strict-alignment architectures.
Such a misaligned TVLV/OGM/OGMv2 is not created by a normal participant in
the mesh. Therefore, reject such malformed packets.
Cc: stable@kernel.org
Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure")
[ Drop change for non-existing mcast handling ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Fri Jun 26 18:10:55 2026 +0200
batman-adv: v: prevent OGM aggregation on disabled hardif
commit d11c00b95b2a3b3934007fc003dccc6fdcc061ad upstream.
When an interface gets disabled, the worker is correctly disabled by
batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable().
In this process, the skb aggr_list is also freed.
But batadv_v_ogm_send_meshif() can still queue new skbs (via
batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all
cores can no longer find the RCU protected list of hard interfaces. These
queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work.
The batadv_v_ogm_iface_disable() function must block
batadv_v_ogm_queue_on_if() to avoid leak of skbs.
Cc: stable@kernel.org
Fixes: f89255a02f1d ("batman-adv: BATMAN_V: introduce per hard-iface OGMv2 queues")
[ Context ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dawei Feng <dawei.feng@seu.edu.cn>
Date: Wed Jun 3 18:53:16 2026 +0800
bpf: use kvfree() for replaced sysctl write buffer
commit 4c21b5927d4364bfe7365f2700da5fea0ed0d004 upstream.
proc_sys_call_handler() allocates its temporary sysctl buffer with
kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since
kvzalloc() may fall back to vmalloc() for large allocations, freeing
that buffer with kfree() is wrong and can corrupt memory.
Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc
allocations.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc5.
Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with
KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the
test tree also included the accompanying fix for the stale ret == 1
check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines
failslab injections to the proc_sys_call_handler() range, uses
stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to
/proc/sys/kernel/domainname from a task in the target cgroup. Under
that setup, fail-nth=1 triggered the fault:
BUG: unable to handle page fault for address: ffffeb0200024d48
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 SMP KASAN NOPTI
CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:kfree+0x6e/0x510
...
Call Trace:
<TASK>
? __cgroup_bpf_run_filter_sysctl+0x626/0xc30
__cgroup_bpf_run_filter_sysctl+0x74d/0xc30
? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10
? srso_return_thunk+0x5/0x5f
? __kvmalloc_node_noprof+0x345/0x870
? proc_sys_call_handler+0x250/0x480
? srso_return_thunk+0x5/0x5f
proc_sys_call_handler+0x3a2/0x480
? __pfx_proc_sys_call_handler+0x10/0x10
? srso_return_thunk+0x5/0x5f
? selinux_file_permission+0x39f/0x500
? srso_return_thunk+0x5/0x5f
? lock_is_held_type+0x9e/0x120
vfs_write+0x98e/0x1000
...
</TASK>
With this fix applied on top of the same test setup, rerunning the
reproducer with fail-nth=1 yields no corresponding Oops reports.
Fixes: 4508943794ef ("proc: use kvzalloc for our kernel buffer")
Cc: stable@vger.kernel.org
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://lore.kernel.org/r/20260603105317.944304-3-dawei.feng@seu.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed Jul 1 19:01:21 2026 +0300
crypto: af_alg - Set merge to zero early in af_alg_sendmsg
commit 9574b2330dbd2b5459b74d3b5e9619d39299fc6f upstream.
If an error causes af_alg_sendmsg to abort, ctx->merge may contain
a garbage value from the previous loop. This may then trigger a
crash on the next entry into af_alg_sendmsg when it attempts to do
a merge that can't be done.
Fix this by setting ctx->merge to zero near the start of the loop.
Fixes: 8ff590903d5 ("crypto: algif_skcipher - User-space interface for skcipher operations")
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Mikhail Dmitrichenko <mdmitrichenko@astralinux.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Date: Thu Jun 25 14:42:10 2026 -0400
crypto: qat - remove unused character device and IOCTLs
[ Upstream commit d237230728c567297f2f98b425d63156ab2ed17f ]
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn>
Reported-by: Bin Yu <byu@xidian.edu.cn>
Reported-by: MingYu Wang <w15303746062@163.com>
Closes: https://lore.kernel.org/all/61d6d499.ab89.19b9b7f3186.Coremail.wangzhi_xd@stu.xidian.edu.cn/
Link: https://lore.kernel.org/all/20260508034841.256794-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260508023542.256299-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260504025120.98242-1-w15303746062@163.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thorsten Blum <thorsten.blum@linux.dev>
Date: Thu Jun 25 14:42:08 2026 -0400
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
[ Upstream commit 1e26339703e2afd397037defa798682b2b93dcc0 ]
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify adf_ctl_alloc_resources(). memdup_user() returns
either -ENOMEM or -EFAULT (instead of -EIO) if an error occurs.
Remove the unnecessary device id initialization, since memdup_user()
(like copy_from_user()) immediately overwrites it.
No functional changes intended other than returning the more idiomatic
error code -EFAULT.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: d237230728c5 ("crypto: qat - remove unused character device and IOCTLs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu Jun 25 14:42:09 2026 -0400
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
[ Upstream commit 5ce9891ea928208a915411ce8227f8c3e37e5ad9 ]
Returning values through arguments is confusing and that has
upset the compiler with the recent change to memdup_user:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:308:26: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized]
308 | ctl_data->device_id);
| ^~
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:294:39: note: ‘ctl_data’ was declared here
294 | struct adf_user_cfg_ctl_data *ctl_data;
| ^~~~~~~~
In function ‘adf_ctl_ioctl_dev_stop’,
inlined from ‘adf_ctl_ioctl’ at ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:386:9:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:273:48: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized]
273 | ret = adf_ctl_is_device_in_use(ctl_data->device_id);
| ~~~~~~~~^~~~~~~~~~~
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:261:39: note: ‘ctl_data’ was declared here
261 | struct adf_user_cfg_ctl_data *ctl_data;
| ^~~~~~~~
In function ‘adf_ctl_ioctl_dev_config’,
inlined from ‘adf_ctl_ioctl’ at ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:382:9:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:192:54: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized]
192 | accel_dev = adf_devmgr_get_dev_by_id(ctl_data->device_id);
| ~~~~~~~~^~~~~~~~~~~
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:185:39: note: ‘ctl_data’ was declared here
185 | struct adf_user_cfg_ctl_data *ctl_data;
| ^~~~~~~~
Fix this by returning the pointer directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: d237230728c5 ("crypto: qat - remove unused character device and IOCTLs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Date: Mon Feb 10 13:16:22 2025 -0600
dlm: prevent NPD when writing a positive value to event_done
commit 8e2bad543eca5c25cd02cbc63d72557934d45f13 upstream.
do_uevent returns the value written to event_done. In case it is a
positive value, new_lockspace would undo all the work, and lockspace
would not be set. __dlm_new_lockspace, however, would treat that
positive value as a success due to commit 8511a2728ab8 ("dlm: fix use
count with multiple joins").
Down the line, device_create_lockspace would pass that NULL lockspace to
dlm_find_lockspace_local, leading to a NULL pointer dereference.
Treating such positive values as successes prevents the problem. Given
this has been broken for so long, this is unlikely to break userspace
expectations.
Fixes: 8511a2728ab8 ("dlm: fix use count with multiple joins")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Nazar Kalashnikov <nazarkalashnikov0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bagas Sanjaya <bagasdotme@gmail.com>
Date: Thu Jun 25 14:42:07 2026 -0400
Documentation: ioctl-number: Extend "Include File" column width
[ Upstream commit 15afd5def819e4df2a29cef6fcfa6ae7ba167c0f ]
Extend width of "Include File" column to fit full path to
papr-physical-attestation.h in later commit.
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250714015711.14525-3-bagasdotme@gmail.com
Stable-dep-of: d237230728c5 ("crypto: qat - remove unused character device and IOCTLs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dexuan Cui <decui@microsoft.com>
Date: Tue Jun 16 21:48:01 2026 -0400
Drivers: hv: vmbus: Improve the logic of reserving fb_mmio on Gen2 VMs
[ Upstream commit 016a25e4b0df4d77e7c258edee4aaf982e4ee809 ]
If vmbus_reserve_fb() in the kdump/kexec kernel fails to properly reserve
the framebuffer MMIO range (which is below 4GB) due to a Gen2 VM's
screen.lfb_base being zero [1], there is an MMIO conflict between the
drivers hyperv-drm and pci-hyperv: when the driver pci-hyperv's
hv_allocate_config_window() calls vmbus_allocate_mmio() to get an
MMIO range, typically it gets a 32-bit MMIO range that overlaps with the
framebuffer MMIO range, and later hv_pci_enter_d0() fails with an
error message "PCI Pass-through VSP failed D0 Entry with status" since
the host thinks that PCI devices must not use MMIO space that the
host has assigned to the framebuffer.
This is especially an issue if pci-hyperv is built-in and hyperv-drm is
built as a module. Consequently, the kdump/kexec kernel fails to detect
PCI devices via pci-hyperv, and may fail to mount the root file system,
which may reside in a NVMe disk. The issue described here has existed
for SR-IOV VF NICs since day one of the pci-hyperv driver, and has been
worked around on x64 when possible. With the recent introduction of
ARM64 VMs that boot from NVMe, there is no workaround, so we need a
formal fix.
On Gen2 VMs, if the screen.lfb_base is 0 in the kdump/kexec kernel [1],
fall back to the low MMIO base, which should be equal to the framebuffer
MMIO base [2] (the statement is true according to my testing on x64
Windows Server 2016, and on x64 and ARM64 Windows Server 2025 and on
Azure. I checked with the Hyper-V team and they said the statement should
continue to be true for Gen2 VMs). In the first kernel, screen.lfb_base
is not 0; if the user specifies a very high resolution, it's not enough
to only reserve 8MB: let's always reserve half of the space below 4GB,
but cap the reservation to 128MB, which is the required framebuffer size
of the highest resolution 7680*4320 supported by Hyper-V.
While at it, fix the comparison "end > VTPM_BASE_ADDRESS" by changing
the > to >=. Here the 'end' is an inclusive end (typically, it's
0xFFFF_FFFF for the low MMIO range).
Note: vmbus_reserve_fb() now also reserves an MMIO range at the beginning
of the low MMIO range on CVMs, which have no framebuffers (the
'screen.lfb_base' in vmbus_reserve_fb() is 0 for CVMs), just in case the
host might treat the beginning of the low MMIO range specially [3]. BTW,
the OpenHCL kernel is not affected by the change, because that kernel
boots with DeviceTree rather than ACPI (so vmbus_reserve_fb() won't run
there), and there is no framebuffer device for that kernel.
Note: normally Gen1 VMs don't have the MMIO conflict issue because the
framebuffer MMIO range (which is hardcoded to base=4GB-128MB and
size=64MB for Gen1 VMs by the host) is always reported via the legacy PCI
graphics device's BAR, so the kdump/kexec kernel can reserve the 64MB
MMIO range; however, if the VM is configured to use a very high resolution
and the required framebuffer size exceeds 64MB (AFAIK, in practice, this
isn't a typical configuration by users), the hyperv-drm driver may need to
allocate an MMIO range above 4GB and change the framebuffer MMIO location
to the allocated MMIO range -- in this case, there can still be issues [4]
which can't be easily fixed: any possible affected Gen1 users would have
to use a resolution whose framebuffer size is <= 64MB, or switch to Gen2
VMs.
[1] https://lore.kernel.org/all/SA1PR21MB692176C1BC53BFC9EAE5CF8EBF51A@SA1PR21MB6921.namprd21.prod.outlook.com/
[2] https://lore.kernel.org/all/SA1PR21MB69218F955B62DFF62E3E88D2BF222@SA1PR21MB6921.namprd21.prod.outlook.com/
[3] https://lore.kernel.org/all/SN6PR02MB415726B17D5A6027CD1717E8D4342@SN6PR02MB4157.namprd02.prod.outlook.com/
[4] https://lore.kernel.org/all/SA1PR21MB69213486F821CA5A2C793C81BF342@SA1PR21MB6921.namprd21.prod.outlook.com/
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
CC: stable@vger.kernel.org
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Harry Wentland <harry.wentland@amd.com>
Date: Tue May 12 15:24:22 2026 -0400
drm/amd/display: Bound VBIOS record-chain walk loops
[ Upstream commit ff287df16a1a58aca78b08d1f3ee09fc44da0351 ]
[Why & How]
All record-chain walk loops in bios_parser.c and bios_parser2.c use
for(;;) and only terminate on a 0xFF record_type sentinel or zero
record_size. A malformed VBIOS image missing the terminator record
causes unbounded iteration at probe time, potentially hundreds of
thousands of iterations with record_size=1. In the final iterations
near the BIOS image boundary, struct casts beyond the 2-byte header
validated by GET_IMAGE can also read out of bounds.
Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256)
iterations. The atombios.h defines up to 22 distinct record types
and atomfirmware.h has 13. Assuming an average of less than 10
records per type (which is reasonable since most are connector-
based) 256 is a generous upper bound.
Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Assisted-by: Copilot:claude-opus-4.6 Mythos
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maíra Canal <mcanal@igalia.com>
Date: Tue Jun 2 14:50:15 2026 -0300
drm/v3d: Skip CSD when it has zeroed workgroups
[ Upstream commit 7f93fad5ea0affc9e1505dd0f7596c0fdb496213 ]
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader.
Cc: stable@vger.kernel.org
Fixes: d223f98f0209 ("drm/v3d: Add support for compute shader dispatch.")
Suggested-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260602-v3d-fix-indirect-csd-v4-2-654309e32bc0@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maíra Canal <mcanal@igalia.com>
Date: Tue Aug 26 11:18:59 2025 -0300
drm/v3d: Store the active job inside the queue's state
[ Upstream commit 0d3768826d38c0ac740f8b45cd13346630535f2b ]
Instead of storing the queue's active job in four different variables,
store the active job inside the queue's state. This way, it's possible
to access all active jobs using an index based in `enum v3d_queue`.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20250826-v3d-queue-lock-v3-2-979efc43e490@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Stable-dep-of: 7f93fad5ea0a ("drm/v3d: Skip CSD when it has zeroed workgroups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Bommarito <michael.bommarito@gmail.com>
Date: Wed Apr 22 11:58:44 2026 -0400
exfat: fix potential use-after-free in exfat_find_dir_entry()
commit 3f5f8ee9917cc2b9076ac533492d8a200edcabb8 upstream.
In exfat_find_dir_entry(), the buffer_head obtained from
exfat_get_dentry() is released with brelse(bh) before the fall-through
TYPE_EXTEND branch reads the directory entry through ep (which points
into bh->b_data):
brelse(bh);
if (entry_type == TYPE_EXTEND) {
...
len = exfat_extract_uni_name(ep, entry_uniname);
...
}
After brelse() drops our reference, nothing guarantees that the
underlying page backing bh->b_data remains valid for the subsequent
exfat_extract_uni_name() read. This is the same pattern fixed in
commit fc961522ddbd ("exfat: Fix potential use after free in
exfat_load_upcase_table()").
Move brelse(bh) so it runs after ep is no longer dereferenced on
each branch.
Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y
+ CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image
(long filename with same-hash collisions forcing the TYPE_EXTEND path).
With a debug-only invalidate_bdev() inserted between brelse(bh) and
the ep read to make the stale-deref window deterministic, the
unpatched kernel faults:
BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0
BUG: unable to handle page fault for address: ffff88801a5fa0c2
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0
With this patch applied, the same instrumented harness completes
cleanly under the same sanitizer stack. I have not reproduced a
crash on an uninstrumented kernel under ordinary reclaim; the
instrumented A/B establishes the lifetime violation and that the
patch closes it, not an unaided triggerability claim.
Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yuto Ohnuki <ytohnuki@amazon.com>
Date: Tue Jun 30 17:39:24 2026 +0100
ext4: add bounds check for inline data length in ext4_read_inline_page
[ Upstream commit 356227096eb66e41b23caf7045e6304877322edf ]
ext4_read_inline_page() does not validate that the inline data length
fits within a page before copying data. If the inline size exceeds
PAGE_SIZE due to filesystem corruption, this could lead to a kernel
memory write beyond the page boundary.
Add a bounds check after computing len, returning -EFSCORRUPTED if the
value exceeds PAGE_SIZE.
The upstream commit replaced a BUG_ON(len > PAGE_SIZE) in
ext4_read_inline_folio(). In 6.1 and earlier, the function is still named
ext4_read_inline_page() and the BUG_ON was never present, so this patch
adds the bounds check directly.
Fixes: 46c7f254543d ("ext4: add read support for inline data")
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Cen <rollkingzzc@gmail.com>
Date: Mon Jun 15 15:19:54 2026 +0800
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
commit c4810ada31e80cbe4011467c4f3b1e93f94134f3 upstream.
f2fs_acl_count() only validates the aggregate ACL xattr length. A
malformed ACL can still place ACL_USER or ACL_GROUP in a slot that only
contains struct f2fs_acl_entry_short bytes, and f2fs_acl_from_disk()
then reads entry->e_id before verifying that a full entry fits.
Require a short entry before reading e_tag and e_perm, and require a
full entry before reading e_id for ACL_USER and ACL_GROUP. Return
-EFSCORRUPTED from these new truncated-entry checks, while keeping the
pre-existing -EINVAL paths unchanged.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in __f2fs_get_acl+0x6fb/0x7e0
RIP: 0033:0x7f4b835ea7aa
The buggy address belongs to the object at ffff888114589960 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 8-byte
region [ffff888114589960, ffff888114589968)
Read of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
__f2fs_get_acl+0x6fb/0x7e0 (fs/f2fs/acl.c:169)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x224/0x430 (?:?)
kasan_report+0xe0/0x110 (?:?)
__f2fs_get_acl+0x5/0x7e0 (fs/f2fs/acl.c:169)
__get_acl+0x281/0x380 (?:?)
vfs_get_acl+0x10b/0x190 (?:?)
do_get_acl+0x2a/0x410 (?:?)
do_get_acl+0x9/0x410 (?:?)
do_getxattr+0xe8/0x260 (?:?)
filename_getxattr+0xd1/0x140 (?:?)
do_getname+0x2d/0x2d0 (?:?)
path_getxattrat+0x16c/0x200 (?:?)
lock_release+0xc8/0x290 (?:?)
cgroup_update_frozen+0x9d/0x320 (?:?)
lockdep_hardirqs_on_prepare+0xea/0x1a0 (?:?)
trace_hardirqs_on+0x1a/0x170 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Cc: stable@kernel.org
Fixes: af48b85b8cd3 ("f2fs: add xattr and acl functionalities")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ian Bridges <icb@fastmail.org>
Date: Wed Jun 24 23:13:12 2026 -0500
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
commit 7f08fc10fa3d3366dc3af723970bd03d7d6d10e3 upstream.
info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_modelist() to re-point consoles, but that
only handles consoles mapped to the framebuffer. With fbcon unbound there
are none, so info->var is left describing a mode that is no longer in the
list.
A later console takeover runs var_to_display(), where fb_match_mode()
returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it
to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.
Keep the current mode in the list in fb_new_modelist(), the same way
fb_set_var() does.
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steffen Persvold <spersvold@gmail.com>
Date: Fri Jun 12 18:40:41 2026 +0200
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
commit d894c48a57d78206e4df9c90d4acfaf39394806a upstream.
The 1920x1080@60 modedb entry has one too many initializers before
its sync field: a stray "0" occupies the sync slot, which shifts the
remaining values by one field. The entry therefore decodes as
sync = 0, vmode = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT (0x3,
i.e. FB_VMODE_INTERLACED | FB_VMODE_DOUBLE), and flag =
FB_VMODE_NONINTERLACED, instead of the intended sync = positive H/V,
vmode = non-interlaced.
fb_find_mode() then returns a 1920x1080 mode flagged as interlaced +
doublescan with active-low syncs. Drivers that honour var->vmode and
var->sync when programming display timing enable doublescan and the
wrong sync polarity, corrupting the output.
Drop the stray initializer so sync and vmode hold their intended
values (positive H/V sync, non-interlaced), matching the adjacent
1920x1200 entry.
Fixes: c8902258b2b8 ("fbdev: modedb: Add 1920x1080 at 60 Hz video mode")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wentao Liang <vulab@iscas.ac.cn>
Date: Wed Apr 8 15:45:34 2026 +0000
fpga: region: fix use-after-free in child_regions_with_firmware()
commit 54f3c5643ec523a04b6ec0e7c19eb10f5ebebdd3 upstream.
Move of_node_put(child_region) after the error print to avoid accessing
freed memory when pr_err() references child_region.
Fixes: 0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
[ Yilun: Fix the Fixes tag ]
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260408154534.404327-1-vulab@iscas.ac.cn
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Tue Jun 16 21:00:23 2026 +0200
fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios
[ Upstream commit 4e3d1b2c48ca6c55f1e9ca7f8dccc76f120f276c ]
FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios
can contain uninitialized data.
Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already
in the page cache and not wait for data from the FUSE daemon, treat
!uptodate folios as if they weren't present.
This only has security impact on systems that don't enable automatic
zero-initialization of all page allocations via
CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.
Cc: stable@kernel.org
Fixes: 2d45ba381a74 ("fuse: add retrieve request")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20260519-fuse-retrieve-uptodate-v1-1-a7a1912a37f9@google.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
[adjusted for stable: page instead of folio]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joanne Koong <joannelkoong@gmail.com>
Date: Tue Jun 23 15:52:40 2026 -0400
fuse: re-lock request before replacing page cache folio
[ Upstream commit a078484921052d0badd827fcc2770b5cfc1d4120 ]
fuse_try_move_folio() unlocks the request on entry but does not
re-lock it on the success path. This means fuse_chan_abort() can end the
request and free the fuse_io_args (eg fuse_readpages_end()) while the
subsequent copy chain logic after fuse_try_move_folio() accesses the
fuse_io_args, leading to use-after-free issues.
Fix this by calling lock_request() before replace_page_cache_folio().
This ensures the request is locked on the success path which will
prevent the fuse_io_args from being freed while the later copying logic
runs, and also ensures that the ap->folios[i]->mapping is never null
since ap->folios[i] will always point to the newfolio after
replace_page_cache_folio().
Fixes: ce534fb05292 ("fuse: allow splice to move pages")
Cc: stable@vger.kernel.org
Reported-by: Lei Lu <llfamsec@gmail.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fan Wu <fanwu01@zju.edu.cn>
Date: Wed Jun 17 02:05:18 2026 +0000
hdlc_ppp: sync per-proto timers before freeing hdlc state
commit c78a4e41ab5ead6193ad8a2dd92e8906bae659fa upstream.
Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp
registers a timer via timer_setup(). That struct ppp is the
hdlc->state allocation, which detach_hdlc_protocol() frees with kfree()
in both teardown paths: unregister_hdlc_device() and the re-attach inside
attach_hdlc_protocol().
The ppp proto never registered a .detach callback, so
detach_hdlc_protocol() performs no timer synchronization before the
kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(),
is partial (it does not wait for a running callback) and only runs on the
->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A
ppp_timer callback already executing (blocked on ppp->lock) survives the
kfree and then dereferences proto->state / ppp->lock in freed memory,
leading to a use-after-free.
Fix this by adding a .detach helper that calls timer_shutdown_sync() on
every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev)
before kfree(hdlc->state), so timer_shutdown_sync()
now runs on both free paths.
timer_shutdown_sync() is used instead of timer_delete_sync() because the
keepalive path re-arms the timer through add_timer()/mod_timer() and
shutdown blocks any re-activation during teardown.
Initialize the per-protocol timers in ppp_ioctl() when the protocol is
attached, and remove the now-redundant timer_setup() from ppp_start(), so
that the timers are initialized exactly once at attach time and
ppp_timer_release() never operates on uninitialized timer_list
structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so
struct ppp's protos[i].timer is uninitialized garbage until the first
timer_setup(); without this init-at-attach, attaching the PPP protocol
without ever bringing the device up would leave timer_shutdown_sync()
operating on uninitialized memory in .detach. Moving the init out of
ppp_start() (which only runs on NETDEV_UP) into the attach path makes the
initialization unconditional and avoids initializing the same timer_list
twice.
This bug was found by static analysis.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260617020518.116319-1-fanwu01@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thorsten Blum <thorsten.blum@linux.dev>
Date: Tue Jun 16 13:35:50 2026 -0400
hv: utils: handle and propagate errors in kvp_register
[ Upstream commit 3fcf923302a8f5c0dc3af3d2ca2657cb5fae4297 ]
Make kvp_register() return an error code instead of silently ignoring
failures, and propagate the error from kvp_handle_handshake() instead of
returning success.
This propagates both kzalloc_obj() and hvutil_transport_send() failures
to kvp_handle_handshake() and thus to kvp_on_msg().
Fixes: 245ba56a52a3 ("Staging: hv: Implement key/value pair (KVP)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Weiming Shi <bestswngs@gmail.com>
Date: Wed Apr 15 01:23:39 2026 +0800
i2c: stub: Reject I2C block transfers with invalid length
commit 6036b5067a8199ba7a2dc7b377d4b9dd276d5f9e upstream.
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
Fixes: 4710317891e4 ("i2c-stub: Implement I2C block support")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Antoniu Miclaus <antoniu.miclaus@analog.com>
Date: Fri Jun 19 17:34:43 2026 +0300
iio: light: bh1780: fix PM runtime leak on error path
commit dd72e6c3cdea05cad24e99710939086f7a113fb5 upstream.
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails.
Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ moved both pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend() before the error check instead of just pm_runtime_put_autosuspend() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Elizaveta Tereshkina <etereshkina@astralinux.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Jun 8 15:59:18 2026 +0000
ip6_vti: set netns_immutable on the fallback device.
[ Upstream commit d289d5307762d1838aaece22c6b6fcad9e8865f9 ]
john1988 and Noam Rathaus reported that vti6_init_net() does not set the
netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).
Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)
correctly set this flag during their fallback device initialization to
prevent them from being moved to another network namespace.
Fixes: 61220ab34948 ("vti6: Enable namespace changing")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260608155918.787644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Salvatore Bonaccorso: Backport for version without 0c493da86374 ("net:
rename netns_local to netns_immutable") in v6.15-rc1 and without
05c1280a2bcf ("netdev_features: convert NETIF_F_NETNS_LOCAL to
dev->netns_local") in v6.12-rc1 and use NETIF_F_NETNS_LOCAL device
feature.]
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qingshuang Fu <fuqingshuang@kylinos.cn>
Date: Thu Jun 18 10:13:52 2026 +0800
irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove
commit 37738fdf2ab1e504d1c63ce5bc0aeb6452d8f057 upstream.
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe and sets up chained
handlers using irq_set_chained_handler_and_data(). However, on driver
removal, the generic chips are not freed and the chained handlers are
not removed.
The generic chips remain on the global gc_list and may later be accessed by
generic interrupt chip suspend, resume, or shutdown callbacks after the
driver has been removed, potentially resulting in a use-after-free and
kernel crash.
The chained handlers that were installed in probe for peripheral and
syswake interrupts are also left dangling, which can lead to spurious
interrupts accessing freed memory.
Fix these issues by:
- Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the
core code automatically removes generic chips when irq_domain_remove()
is called
- Clearing all chained handlers with NULL in pdc_intc_remove()
Fixes: b6ef9161e43a ("irq-imgpdc: add ImgTec PDC irqchip driver")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260618021352.661773-1-fffsqian@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jarkko Sakkinen <jarkko@kernel.org>
Date: Mon Jun 1 23:11:54 2026 +0300
KEYS: fix overflow in keyctl_pkey_params_get_2()
commit cb481e59ea6cae3b7796ac1d7a22b6b24c3f3c0b upstream.
The length for the internal output buffer is calculated incorrectly, which
can result overflow when a too small buffer is provided.
Fix the bug by allocating internal output with the size of the maximum
length of the cryptographic primitive instead of caller provided size.
Link: https://lore.kernel.org/keyrings/20260531024914.3712130-1-jarkko@kernel.org/
Cc: stable@vger.kernel.org # v4.20+
Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Reported-by: Alessandro Groppo <ale.grpp@gmail.com>
Tested-by: Alessandro Groppo <ale.grpp@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shaomin Chen <eeesssooo020@gmail.com>
Date: Wed Jun 10 13:10:05 2026 +0300
keys: Pin request_key_auth payload in instantiate paths
commit fd15b457a86939c38aa12116adabd8ff686c5e51 upstream.
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.]
Cc: stable@vger.kernel.org # v5.10+
Fixes: b5f545c880a2 ("[PATCH] keys: Permit running process to instantiate keys")
Reported-by: Shaomin Chen <eeesssooo020@gmail.com>
Closes: https://lore.kernel.org/r/20260519144403.436694-1-eeesssooo020@gmail.com
Signed-off-by: Shaomin Chen <eeesssooo020@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yijia Wang <wangyijia.yeah@bytedance.com>
Date: Sat Jun 27 11:22:59 2026 +0800
kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported
[ Upstream commit 78c09c0f4df89fabdcfb3e5e53d3196cf67f64ef ]
On platform where SVE is supported but there are less than 2 VLs available
the signal SVE change test should be skipped instead of failing.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Yijia Wang <wangyijia.yeah@bytedance.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gil Portnoy <dddhkts1@gmail.com>
Date: Thu Jun 25 12:25:13 2026 -0400
ksmbd: reject non-VALID session in compound request branch
[ Upstream commit 609ca17d869d04ba249e32cdcbf13c0b1c66f43c ]
smb2_check_user_session() takes a shortcut for any operation that is not
the first in a COMPOUND request: it reuses work->sess (the session bound by
the first operation) and validates only the SessionId, then returns
"valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a
SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation
value) skips even the id comparison. The standalone path
(ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does
enforce the VALID state; the compound branch bypasses all of it.
A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes
a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL
(->user is assigned later, by ntlm_authenticate()). Used as operation 1 of
a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX,
\\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and
reaches ksmbd_ipc_tree_connect_request(), which dereferences
user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704)
-> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd
worker for all clients.
Reject any non-first compound operation that lands on a session which is
not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path
enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session,
but it is never carried as a non-first compound operation, so multi-leg
authentication is unaffected by this check.
Fixes: 5005bcb42191 ("ksmbd: validate session id and tree id in the compound request")
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ashutosh Desai <ashutoshdesai993@gmail.com>
Date: Fri May 1 13:35:32 2026 -0700
KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path
commit 78ee2d50185a037b3d2452a97f3dad69c3f7f389 upstream.
In sev_dbg_crypt(), the per-iteration transfer length is bounded by
the source page offset (PAGE_SIZE - s_off) but not by the destination
page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt
path (__sev_dbg_encrypt_user) performs a read-modify-write using a
single-page intermediate buffer (dst_tpage):
1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16)
before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE,
the PSP writes beyond the end of the 4096-byte dst_tpage allocation.
2. The subsequent memcpy()/copy_from_user() into
page_address(dst_tpage) + (d_off & 15) of 'len' bytes overflows
by up to 15 bytes under the same condition.
Trigger example: s_off = 0, d_off = 1, debug.len = PAGE_SIZE -
the PSP is instructed to write round_up(4097, 16) = 4112 bytes to
a 4096-byte buffer.
Fix by also bounding len by (PAGE_SIZE - d_off), the same check that
sev_send_update_data() already performs for its single-page guest
region.
==================================================================
BUG: KASAN: slab-use-after-free in sev_dbg_crypt+0x993/0xd10 [kvm_amd]
Write of size 4095 at addr ff110062293bb009 by task sev_dbg_test/228214
CPU: 96 UID: 0 PID: 228214 Comm: sev_dbg_test Tainted: G U W 7.0.0-smp--5ce9b0c48211-dbg #156 PREEMPTLAZY
Tainted: [U]=USER, [W]=WARN
Hardware name: Google Astoria/astoria, BIOS 0.20250817.1-0 08/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0x54/0x70
print_report+0xbc/0x260
kasan_report+0xa2/0xd0
kasan_check_range+0x25f/0x2c0
__asan_memcpy+0x40/0x70
sev_dbg_crypt+0x993/0xd10 [kvm_amd]
sev_mem_enc_ioctl+0x33c/0x450 [kvm_amd]
kvm_vm_ioctl+0x65d/0x6d0 [kvm]
__se_sys_ioctl+0xb2/0x100
do_syscall_64+0xe8/0x870
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7fe72b6a0 pfn:0x62293bb
memcg:ff11000112827d82
flags: 0x1400000000000000(node=1|zone=1)
raw: 1400000000000000 0000000000000000 dead000000000122 0000000000000000
raw: 00000007fe72b6a0 0000000000000000 00000001ffffffff ff11000112827d82
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ff110062293bbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff110062293bbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ff110062293bc000: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ff110062293bc080: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ff110062293bc100: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
Fixes: 24f41fb23a39 ("KVM: SVM: Add support for SEV DEBUG_DECRYPT command")
Fixes: 7d1594f5d94b ("KVM: SVM: Add support for SEV DEBUG_ENCRYPT command")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
[sean: add sample KASAN splat, Fixes, and stable@]
Link: https://patch.msgid.link/20260501203537.2120074-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Jun 26 19:46:19 2026 +0200
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
commit ef057cbf825e03b63f6edf5980f96abf3c53089d upstream.
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization.
Fixes: 9eba50f8d7fc ("KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Alexander Bulekov <bkov@amazon.com>
Cc: Fred Griffoul <fgriffo@amazon.co.uk>
Cc: Alexander Graf <graf@amazon.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Filippo Sironi <sironi@amazon.de>
Cc: Ivan Orlov <iorlov@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Sat Jul 4 13:39:41 2026 +0200
Linux 5.15.211
Link: https://lore.kernel.org/r/20260702155109.196223802@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Tue May 26 20:37:26 2026 +0200
mac802154: llsec: add skb_cow_data() before in-place crypto
commit 84a04eb5b210643bd67aab81ff805d32f62aa865 upstream.
llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(),
llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform
in-place cryptographic transformations on skb data. They build a
scatterlist with sg_init_one() pointing into the skb's linear data area
and then pass the same scatterlist as both src and dst to the crypto API
(e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt).
On the RX path, __ieee802154_rx_handle_packet() clones the received skb
before handing it to each subscriber via ieee802154_subif_frame(). The
cloned skb shares the same underlying data buffer via reference
counting. When llsec_do_decrypt() subsequently modifies this shared
buffer in place, it corrupts data that other clones -- potentially
belonging to other sockets or subsystems -- still reference.
On the TX path, similar data sharing can occur when an skb's head has
been cloned (skb_cloned() returns true).
The fix is to call skb_cow_data() before performing any in-place crypto
operation. skb_cow_data() ensures that the skb's data area is not
shared: if the skb head is cloned or the data spans multiple fragments,
it copies the data into a private buffer that can be safely modified in
place. This is the same pattern used by:
- ESP (net/ipv4/esp4.c, net/ipv6/esp6.c)
- MACsec (drivers/net/macsec.c)
- WireGuard (drivers/net/wireguard/receive.c)
- TIPC (net/tipc/crypto.c)
Without this guard, in-place crypto on shared skb data leads to:
- Silent data corruption of other skb clones
- Use-after-free when the crypto API scatterwalk writes through a
page that has already been freed by another clone's kfree_skb()
- Kernel crashes under concurrent 802.15.4 traffic with security
enabled (KASAN/KMSAN reports slab-use-after-free)
Found by 0sec (https://0sec.ai) using automated source analysis.
Fixes: 4c14a2fb5d14 ("mac802154: add llsec decryption method")
Fixes: 03556e4d0dbb ("mac802154: add llsec encryption method")
Cc: stable@vger.kernel.org
Reported-by: Doruk Tan Ozturk <doruk@0sec.ai>
Closes: https://lore.kernel.org/linux-wpan/20260525161806.96158-1-doruk@0sec.ai/
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Closes: <link to your mail on lore>
Link: https://lore.kernel.org/20260526183726.56100-1-doruk@0sec.ai
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ruslan Valiyev <linuxoid@gmail.com>
Date: Tue Mar 17 17:05:44 2026 +0000
media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si
commit 7d8bf3d8f91073f4db347ed3aa6302b56107499c upstream.
syzbot reported a general protection fault in
vidtv_psi_ts_psi_write_into [1].
vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does
not check for this before dereferencing the returned pointer to access
the continuity counter. This leads to a general protection fault when
accessing a near-NULL address.
The root cause is that vidtv_mux_pid_ctx_init() does not check the
return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs.
If the allocation fails, the PID context is never created, but init
returns success. The subsequent vidtv_mux_push_si() call then gets
NULL from vidtv_mux_get_pid_ctx() and crashes.
Fix both the root cause (add error check in vidtv_mux_pid_ctx_init
for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for
all vidtv_mux_get_pid_ctx() calls.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events vidtv_mux_tick
RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197
Call Trace:
<TASK>
vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline]
vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231
vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196
vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408
Fixes: f90cf6079bf67 ("media: vidtv: add a bridge driver")
Cc: stable@vger.kernel.org
Reported-by: syzbot+814c351d094f4f1a1b86@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=814c351d094f4f1a1b86
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Wed May 6 23:42:27 2026 +0100
MIPS: DEC: Prevent initial console buffer from landing in XKPHYS
commit 7fb13fd35110ebe95eb053faf79d018f51144d85 upstream.
In 64-bit configurations calling the initial console output handler from
a kernel thread other than the initial one will result in a situation
where the stack has been placed in the XKPHYS 64-bit memory segment and
consequently so has been the buffer allocated there that is used as the
argument corresponding to the `%s' output conversion specifier for the
firmware's printf() entry point.
This 64-bit address will then be truncated by 32-bit firmware, resulting
in an attempt to access the wrong memory location, which in turn will
cause all kinds of unpredictable behaviour, such as a kernel crash:
Console: colour dummy device 160x64
Calibrating delay loop... 49.36 BogoMIPS (lpj=192512)
pid_max: default: 32768 minimum: 301
CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800
Oops[#1]:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121
$ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0
$ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073
$ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473
$12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000
$16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240
$20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b
$24 : ffffffffffffffbf 000000000203bd00
$28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800
Hi : 0000000000000000
Lo : 0000000000000aa8
epc : ffffffffbfc08364 0xffffffffbfc08364
ra : ffffffffbfc08800 0xffffffffbfc08800
Status: 140120e2 KX SX UX KERNEL EXL
Cause : 00000008 (ExcCode 02)
BadVA : 000000000203bd00
PrId : 00000430 (R4000SC)
Modules linked in:
Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d
80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38
0000000000000000 000000000203bd00 0000000000000000 0000000000000000
0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000002500000000 0000000000000000 0000000000000000 802c1a7400000000
0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172
6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320
806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000
...
Call Trace:
Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8)
>>
In this case the pointer in $4 was truncated from 0x980000000203bd00 to
0x000000000203bd00.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started.
Fix the issue by making the buffer static and initdata, and therefore
placed in the CKSEG0 32-bit compatibility segment, observing that the
console output handler is called with the console lock held, implying
no need for this code to be reentrant. Add an assertion to verify the
buffer actually has been placed in a compatibility segment.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Abel Vesa <abelvesa@kernel.org>
Date: Tue Jun 16 15:53:01 2026 -0400
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
[ Upstream commit 9bde43a0e2f469961e18d0a3496a9a74379c22bf ]
dma_set_mask_and_coherent only updates the mask to which the device
dma_mask pointer points to. Add a dma_mask to the channel ctx and set
the device dma_mask to point to that, otherwise the dma_set_mask will
return an error and the dma_set_coherent_mask will be skipped too.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 5401fb4fe10f ("misc: fastrpc: Fix NULL pointer dereference in rpmsg callback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Date: Tue Jun 16 15:53:02 2026 -0400
misc: fastrpc: Fix NULL pointer dereference in rpmsg callback
[ Upstream commit 5401fb4fe10fac6134c308495df18ed74aebb9c4 ]
A NULL pointer dereference was observed on Hawi at boot when the DSP
sends a glink message before fastrpc_rpmsg_probe() has completed
initialization:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178
pc : _raw_spin_lock_irqsave+0x34/0x8c
lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
...
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
qcom_glink_native_rx+0x538/0x6a4
qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]
The faulting address 0x178 corresponds to the lock variable inside
struct fastrpc_channel_ctx, confirming that cctx is NULL when
fastrpc_rpmsg_callback() attempts to take the spinlock.
There are two issues here. First, dev_set_drvdata() is called before
spin_lock_init() and idr_init(), leaving a window where the callback
can retrieve a valid cctx pointer but operate on an uninitialized
spinlock. Second, the rpmsg channel becomes live as soon as the driver
is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata()
is called at all, resulting in dev_get_drvdata() returning NULL.
Fix both issues by moving all cctx initialization ahead of
dev_set_drvdata() so the structure is fully initialized before it
becomes visible to the callback, and add a NULL check in
fastrpc_rpmsg_callback() as a guard against any remaining window.
Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260530204528.116920-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paolo Abeni <pabeni@redhat.com>
Date: Tue Jun 16 12:30:39 2026 -0400
mptcp: fix missing wakeups in edge scenarios
[ Upstream commit 9d8d28738f24b75616d6ca7a27cb4aed88520343 ]
The mptcp_recvmsg() can fill MPTCP socket receive queue via
mptcp_move_skbs(), but currently does not try to wakeup any listener,
because the same process is going to check the receive queue soon.
When multiple threads are reading from the same fd, the above can
cause stall. Add the missing wakeup.
Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-1-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pedro Tammela <pctammela@mojatatu.com>
Date: Thu Jun 18 11:55:04 2026 +0800
net/sched: act_pedit: check static offsets a priori
[ Upstream commit e1201bc781c28766720e78a5e099ffa568be4d74 ]
Static key offsets should always be on 32 bit boundaries. Validate them on
create/update time for static offsets and move the datapath validation
for runtime offsets only.
iproute2 already errors out if a given offset and data size cannot be
packed to a 32 bit boundary. This change will make sure users which
create/update pedit instances directly via netlink also error out,
instead of finding out when packets are traversing.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit e1201bc781c28766720e78a5e099ffa568be4d74)
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pedro Tammela <pctammela@mojatatu.com>
Date: Thu Jun 18 11:55:10 2026 +0800
net/sched: act_pedit: free pedit keys on bail from offset check
[ Upstream commit 1b483d9f5805c7e3d628d4995e97f4311fcb82eb ]
Ido Schimmel reports a memleak on a syzkaller instance:
BUG: memory leak
unreferenced object 0xffff88803d45e400 (size 1024):
comm "syz-executor292", pid 563, jiffies 4295025223 (age 51.781s)
hex dump (first 32 bytes):
28 bd 70 00 fb db df 25 02 00 14 1f ff 02 00 02 (.p....%........
00 32 00 00 1f 00 00 00 ac 14 14 3e 08 00 07 00 .2.........>....
backtrace:
[<ffffffff81bd0f2c>] kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
[<ffffffff81bd0f2c>] slab_post_alloc_hook mm/slab.h:772 [inline]
[<ffffffff81bd0f2c>] slab_alloc_node mm/slub.c:3452 [inline]
[<ffffffff81bd0f2c>] __kmem_cache_alloc_node+0x25c/0x320 mm/slub.c:3491
[<ffffffff81a865d9>] __do_kmalloc_node mm/slab_common.c:966 [inline]
[<ffffffff81a865d9>] __kmalloc+0x59/0x1a0 mm/slab_common.c:980
[<ffffffff83aa85c3>] kmalloc include/linux/slab.h:584 [inline]
[<ffffffff83aa85c3>] tcf_pedit_init+0x793/0x1ae0 net/sched/act_pedit.c:245
[<ffffffff83a90623>] tcf_action_init_1+0x453/0x6e0 net/sched/act_api.c:1394
[<ffffffff83a90e58>] tcf_action_init+0x5a8/0x950 net/sched/act_api.c:1459
[<ffffffff83a96258>] tcf_action_add+0x118/0x4e0 net/sched/act_api.c:1985
[<ffffffff83a96997>] tc_ctl_action+0x377/0x490 net/sched/act_api.c:2044
[<ffffffff83920a8d>] rtnetlink_rcv_msg+0x46d/0xd70 net/core/rtnetlink.c:6395
[<ffffffff83b24305>] netlink_rcv_skb+0x185/0x490 net/netlink/af_netlink.c:2575
[<ffffffff83901806>] rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6413
[<ffffffff83b21cae>] netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
[<ffffffff83b21cae>] netlink_unicast+0x5be/0x8a0 net/netlink/af_netlink.c:1365
[<ffffffff83b2293f>] netlink_sendmsg+0x9af/0xed0 net/netlink/af_netlink.c:1942
[<ffffffff8380c39f>] sock_sendmsg_nosec net/socket.c:724 [inline]
[<ffffffff8380c39f>] sock_sendmsg net/socket.c:747 [inline]
[<ffffffff8380c39f>] ____sys_sendmsg+0x3ef/0xaa0 net/socket.c:2503
[<ffffffff838156d2>] ___sys_sendmsg+0x122/0x1c0 net/socket.c:2557
[<ffffffff8381594f>] __sys_sendmsg+0x11f/0x200 net/socket.c:2586
[<ffffffff83815ab0>] __do_sys_sendmsg net/socket.c:2595 [inline]
[<ffffffff83815ab0>] __se_sys_sendmsg net/socket.c:2593 [inline]
[<ffffffff83815ab0>] __x64_sys_sendmsg+0x80/0xc0 net/socket.c:2593
The recently added static offset check missed a free to the key buffer when
bailing out on error.
Fixes: e1201bc781c2 ("net/sched: act_pedit: check static offsets a priori")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230425144725.669262-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pedro Tammela <pctammela@mojatatu.com>
Date: Thu Jun 18 11:55:06 2026 +0800
net/sched: act_pedit: rate limit datapath messages
[ Upstream commit e3c9673e2f6e1b3aa4bb87c570336e10f364c28a ]
Unbounded info messages in the pedit datapath can flood the printk
ring buffer quite easily depending on the action created.
As these messages are informational, usually printing some, not all,
is enough to bring attention to the real issue.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit e3c9673e2f6e1b3aa4bb87c570336e10f364c28a)
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Date: Thu Jun 18 11:55:08 2026 +0800
net/sched: fix pedit partial COW leading to page cache corruption
[ Upstream commit 899ee91156e57784090c5565e4f31bd7dbffbc5a ]
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Reported-by: Han Guidong <2045gemini@gmail.com>
Reported-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Han Guidong <2045gemini@gmail.com>
Tested-by: Han Guidong <2045gemini@gmail.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com
[rename include file from linux/unaligned.h to asm/unaligned.h]
Conflicts:
include/net/tc_act/tc_pedit.h
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Santosh Kalluri <santosh.kalluri129@gmail.com>
Date: Wed Jun 17 10:49:18 2026 -0400
net: phonet: free phonet_device after RCU grace period
[ Upstream commit 71de0177b28da751f407581a4515cf4d762f6296 ]
phonet_device_destroy() removes a phonet_device from the per-net device
list with list_del_rcu(), but frees it immediately. RCU readers walking
the same list can still hold a pointer to the object after it has been
removed, leading to a slab-use-after-free.
Use kfree_rcu(), matching the lifetime rule already used by
phonet_address_del() for the same object type.
Fixes: eeb74a9d45f7 ("Phonet: convert devices list to RCU")
Cc: stable@vger.kernel.org
Signed-off-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Weiming Shi <bestswngs@gmail.com>
Date: Thu May 14 05:25:12 2026 -0700
net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()
commit d00c953a8f69921f484b629801766da68f27f658 upstream.
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260514122511.3083479-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dominik Woźniak <stalion@gmail.com>
Date: Thu May 21 17:46:56 2026 +0200
nfsd: check get_user() return when reading princhashlen
commit e186fa1c057f5eccb22afb1e83e34c0627085868 upstream.
In __cld_pipe_inprogress_downcall(), the get_user() that reads
princhashlen from the userspace cld_msg_v2 buffer does not check its
return value. A failing copy leaves princhashlen with uninitialised
stack contents, which are then used to drive memdup_user() and stored
as princhash.len on the resulting reclaim record. The other get_user()
calls in this function all check the return; only this one is missed,
which is most likely a copy-paste oversight from when v2 upcalls were
introduced.
Mirror the existing pattern used a few lines above for namelen.
namecopy is declared with __free(kfree) so the early return cleans up
the already-allocated buffer automatically.
Fixes: 6ee95d1c8991 ("nfsd: add support for upcall version 2")
Cc: stable@vger.kernel.org
Signed-off-by: Dominik Woźniak <stalion@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jeff Layton <jlayton@kernel.org>
Date: Thu May 21 13:51:43 2026 -0400
nfsd: fix posix_acl leak on SETACL decode failure
commit 0853ac544c590880d797b04daa33fcb72b6be0e1 upstream.
nfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() each
call nfs_stream_decode_acl() twice, first for NFS_ACL and then for
NFS_DFACL. Each successful call transfers ownership of a freshly
allocated posix_acl into argp->acl_access or argp->acl_default. If
the first call succeeds but the second fails, the decoder returns
false and argp->acl_access is left dangling.
ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat and
ACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle.
Both only call fh_put() and have no knowledge of the ACL fields on
argp. The posix_acl_release() pairs sat at the out: labels inside
nfsacld_proc_setacl() and nfsd3_proc_setacl(), but svc_process()
skips pc_func when pc_decode returns false, so that cleanup is
unreachable on decode failure:
svc_process_common()
pc_decode() /* decode_setaclargs: false */
/* pc_func skipped */
pc_release() /* fh_put only -- ACLs leaked */
The orphaned posix_acl is leaked for the lifetime of the server.
Fix by adding nfsaclsvc_release_setacl() and nfs3svc_release_setacl(),
which release both argp->acl_access and argp->acl_default in addition
to fh_put(), and wiring them as pc_release for their respective SETACL
procedures. pc_release runs on every path svc_process() takes after
decode, including decode failure, so the posix_acl_release() pairs are
removed from the proc functions' out: labels to keep ownership in one
place. This matches the existing release_getacl() pattern used by
the sibling GETACL procedures.
Fixes: a257cdd0e217 ("[PATCH] NFSD: Add server support for NFSv3 ACLs.")
Cc: stable@vger.kernel.org
Assisted-by: kres:claude-opus-4-7
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guannan Wang <wgnbuaa@gmail.com>
Date: Thu May 21 16:03:32 2026 +0800
NFSD: Fix SECINFO_NO_NAME decode error cleanup
commit 9e18e83b8846a5c3fe13fc8a464b4865d33996c6 upstream.
nfsd4_decode_secinfo_no_name() currently initializes sin_exp after
decoding sin_style. If the XDR stream is truncated, the decoder returns
nfserr_bad_xdr before sin_exp is initialized.
Since commit 3fdc54646234 ("NFSD: Reduce amount of struct
nfsd4_compoundargs that needs clearing"), the inline iops array is not
cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore
leave sin_exp holding stale union contents from a previous operation.
The error response path still invokes nfsd4_secinfo_no_name_release(),
which calls exp_put() on a non-NULL sin_exp.
Initialize sin_exp before the first failable decode step, matching
nfsd4_decode_secinfo().
Fixes: 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing")
Cc: stable@vger.kernel.org
Signed-off-by: Guannan Wang <wgnbuaa@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Bommarito <michael.bommarito@gmail.com>
Date: Wed May 27 12:30:35 2026 -0400
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
commit 41fe0f7b84f0cb822ae10ab08592996a592b2a25 upstream.
nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a
netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately
calls strrchr(buf, '.') to locate the port separator. Both decodes
use xdr_stream_decode_string_dup(), and the current code checks only
"nlen < 0" / "rlen < 0" before dereferencing the returned string.
When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline()
returns 0 and xdr_stream_decode_string_dup() falls through to its
"*str = NULL; return ret" tail, leaving buf NULL with a return value
of 0. The "< 0" check does not catch this, and the next line is
strrchr(NULL, '.'), a kernel NULL pointer dereference reachable from
any pNFS-flexfile client mounted against a malicious or compromised
metadata server.
Reject the zero-length cases explicitly so the decoder fails with
-EBADMSG (treated as a malformed GETDEVICEINFO body) instead of
panicking the client.
Cc: stable@vger.kernel.org
Fixes: 6b7f3cf96364 ("nfs41: pull decode_ds_addr from file layout to generic pnfs")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Date: Wed Jun 10 12:31:01 2026 +0200
ntfs3: reject direct userspace writes to reserved $LX* xattrs
commit 5b08dccecf825cbf905f348bc6ccb497507e28e2 upstream.
NTFS3 uses $LXUID, $LXGID, $LXMOD and $LXDEV as internal WSL
permission metadata and reloads them into i_uid, i_gid and i_mode
from ntfs_get_wsl_perm().
Because the empty-prefix xattr handler also lets file owners call
setxattr() on these names directly, an unprivileged writer on a
writable ntfs3 mount can plant root ownership and S_ISUID on their own
file and gain euid 0 after inode reload.
Reject direct userspace writes to the reserved $LX* names. Internal
ntfs3 metadata updates are unchanged because ntfs_save_wsl_perm()
writes them via ntfs_set_ea() directly.
Signed-off-by: Zhen Yan <sdjasjbuaa@gmail.com>
[almaz.alexandrovich@paragon-software.com: added an additional check for non privileged users]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhang Cen <rollkingzzc@gmail.com>
Date: Sun May 24 19:12:48 2026 +0800
ocfs2: reject oversized group bitmap descriptors
commit 9bd541e09dffff27e5bec0f9f45b0228173a5375 upstream.
ocfs2_validate_gd_parent() only bounds bg_bits against the parent
allocator's chain geometry. A malicious descriptor can still claim a
bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in
the group descriptor block, so later bitmap scans and bit updates can run
past bg_bitmap.
Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent
allocator type and reject descriptors whose bg_size or bg_bits exceed that
capacity. Keep the existing chain geometry check so both the on-disk
bitmap layout and the allocator metadata must agree before the descriptor
is used.
Validation reproduced this kernel report:
KASAN use-after-free in _find_next_bit+0x7f/0xc0
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xd0/0x630 (?:?)
_find_next_bit+0x7f/0xc0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x188/0x2f0 (?:?)
kasan_report+0xe4/0x120 (?:?)
ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375)
ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457)
ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86)
ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786)
ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886)
get_page_from_freelist+0x70e/0x2370 (?:?)
lock_release+0xc6/0x290 (?:?)
do_raw_spin_unlock+0x9a/0x100 (?:?)
kasan_unpoison+0x27/0x60 (?:?)
__bfs+0x147/0x240 (?:?)
get_page_from_freelist+0x83d/0x2370 (?:?)
ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96)
sched_domains_numa_masks_clear+0x70/0xd0 (?:?)
check_irq_usage+0xe8/0xb70 (?:?)
__ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497)
check_path+0x24/0x50 (?:?)
rcu_is_watching+0x20/0x50 (?:?)
check_prev_add+0xfd/0xd00 (?:?)
ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?)
__folio_batch_add_and_move+0x1f5/0x3d0 (?:?)
ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?)
filemap_add_folio+0x105/0x1f0 (?:?)
ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043)
ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?)
down_write+0xf5/0x180 (?:?)
ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?)
__mark_inode_dirty+0x758/0x9a0 (?:?)
inode_to_bdi+0x41/0x90 (?:?)
balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?)
generic_perform_write+0x252/0x440 (?:?)
mnt_put_write_access_file+0x16/0x70 (?:?)
file_update_time_flags+0xe4/0x200 (?:?)
ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?)
lock_acquire+0x184/0x2f0 (?:?)
ksys_write+0xd2/0x170 (?:?)
apparmor_file_permission+0xf5/0x310 (?:?)
read_zero+0x8d/0x140 (?:?)
lock_is_held_type+0x8f/0x100 (?:?)
Link: https://lore.kernel.org/20260524111248.1429884-1-rollkingzzc@gmail.com
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Wed Jun 17 10:49:16 2026 -0400
phonet: Pass ifindex to fill_addr().
[ Upstream commit 08a9572be36819b5d9011604edfa5db6c5062a7a ]
We will convert addr_doit() and getaddr_dumpit() to RCU, both
of which call fill_addr().
The former will call phonet_address_notify() outside of RCU
due to GFP_KERNEL, so dev will not be available in fill_addr().
Let's pass ifindex directly to fill_addr().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 71de0177b28d ("net: phonet: free phonet_device after RCU grace period")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Wed Jun 17 10:49:17 2026 -0400
phonet: Pass net and ifindex to phonet_address_notify().
[ Upstream commit 68ed5c38b512b734caf3da1f87db4a99fcfe3002 ]
Currently, phonet_address_notify() fetches netns and ifindex from dev.
Once addr_doit() is converted to RCU, phonet_address_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to phonet_address_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 71de0177b28d ("net: phonet: free phonet_device after RCU grace period")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wentao Liang <vulab@iscas.ac.cn>
Date: Mon May 18 13:10:36 2026 +0000
pNFS: Fix use-after-free in pnfs_update_layout()
commit 13e198a90ca4050f4bee8a3f23680389a6563ccc upstream.
When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(),
the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds,
pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(),
which still references 'lo'. This results in a use-after-free when the
tracepoint accesses lo's fields.
Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo).
Fixes: 2c8d5fc37fe2 ("pNFS: Stricter ordering of layoutget and layoutreturn")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wentao Liang <vulab@iscas.ac.cn>
Date: Tue Apr 7 07:30:25 2026 +0000
power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init()
commit 8eec545cde69e46e9a1d2b7d915ce4f5df85b3bd upstream.
Move of_node_put(dn) after the of_match_node() call, which still needs
the node pointer. The node reference is correctly released after use.
Fixes: e2f471efe1d6 ("power: reset: linkstation-poweroff: prepare for new devices")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260407073025.271865-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lord Ulf Henrik Holmberg <henrik.holmberg@defensify.se>
Date: Sat May 9 10:40:11 2026 +0200
RDMA/bnxt_re: zero shared page before exposing to userspace
commit f6b079629becfa977f9c51fe53ad2e6dcc55ef44 upstream.
bnxt_re_alloc_ucontext() allocates uctx->shpg via
__get_free_page(GFP_KERNEL). The buddy allocator does not zero pages
without __GFP_ZERO, so the page contains stale kernel data from
whatever object most recently freed it.
The page is then mapped into userspace via vm_insert_page() under
BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes
4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside
bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed
to userspace unsanitised, leaking kernel memory contents.
Any user with access to /dev/infiniband/uverbsX on a host with a
bnxt_re device (typically rdma group membership) can read this data
via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT.
Other shared pages in the same file already use get_zeroed_page()
correctly:
drivers/infiniband/hw/bnxt_re/ib_verbs.c
srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL);
cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL);
uctx->shpg is the only outlier. Bring it in line with the existing
convention by switching to get_zeroed_page().
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Lord Ulf Henrik Holmberg <henrik.holmberg@defensify.se>
Link: https://patch.msgid.link/20260509084011.11971-1-pomzm67@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: André Draszik <andre.draszik@linaro.org>
Date: Fri Jan 9 08:38:38 2026 +0000
regulator: core: fix locking in regulator_resolve_supply() error path
commit 497330b203d2c59c5ff3fa4c34d14494d7203bc3 upstream.
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference.
Fixes: 36a1f1b6ddc6 ("regulator: core: Fix memory leak in regulator_resolve_supply()")
Fixes: 8e5356a73604 ("regulator: core: Clear the supply pointer if enabling fails")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-2-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nazar Kalashnikov <nazarkalashnikov0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Petr Machata <petrm@nvidia.com>
Date: Thu Jun 25 14:31:52 2026 +0200
Revert "ptp: add testptp mask test"
This reverts commit 8510559c0fa1e228b18fcf77cfbcf5b970793a8a, which is
commit 26285e689c6cd2cf3849568c83b2ebe53f467143 upstream.
The reverted commit extends the selftest to test timestamp event queue mask
manipulation in testptp. It exercises masks PTP_MASK_CLEAR_ALL and
PTP_MASK_EN_SINGLE, introduced in commit c5a445b1e934 ("ptp: support event
queue reader channel masks"), which is not on this stable branch. The test
case thus cannot be built against this tree's own UAPI headers.
The reverted commit was introduced to resolve a missing dependency of
commit bef3a83a9a67 ("testptp: Add option to open PHC in readonly mode"),
which is 76868642e427 upstream. The only conflict between the two is the
getopt string, and there is otherwise no direct dependency between the two.
This patch therefore reverts the cited commit, with hand-resolving the
getopt string to include 'r' (as introduced by c6dc458227a3), but not
'F' (introduced by c1c50689799d).
Reported-by: Yong Wang <yongwang@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Petr Machata <petrm@nvidia.com>
Date: Thu Jun 25 14:31:51 2026 +0200
Revert "selftest/ptp: update ptp selftest to exercise the gettimex options"
This reverts commit 6b32d042aa8255e964ebed860e24adccb204fcbc, which is
commit 3d07b691ee707c00afaf365440975e81bb96cd9b upstream.
The cited commit allows testptp to set a configurable clock_id. That is
done via a PTP_SYS_OFFSET_EXTENDED ioctl call, whose argument is struct
ptp_sys_offset_extended, where the clock_id is set. However, this Linux
version does not support the ptp_sys_offset_extended.clockid field, and
the test case cannot be built against this tree's own UAPI headers.
The reverted commit was introduced to resolve a missing dependency of
commit bef3a83a9a67 ("testptp: Add option to open PHC in readonly mode"),
which is 76868642e427 upstream. My suspicion is that the only conflict
between the two is the getopt string, and there is otherwise no direct
dependency between the two.
This patch therefore reverts the cited commit, with hand-resolving the
getopt string to include 'r' (as introduced by c6dc458227a3), but not
'y' (introduced by 06954f715deb).
Reported-by: Yong Wang <yongwang@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bjoern Doebel <doebel@amazon.de>
Date: Tue Jun 30 06:03:21 2026 +0000
ring-buffer: Remove ring_buffer_read_prepare_sync()
[ Upstream commit 119a5d573622ae90ba730d18acfae9bb75d77b9a ]
When the ring buffer was first introduced, reading the non-consuming
"trace" file required disabling the writing of the ring buffer. To make
sure the writing was fully disabled before iterating the buffer with a
non-consuming read, it would set the disable flag of the buffer and then
call an RCU synchronization to make sure all the buffers were
synchronized.
The function ring_buffer_read_start() originally would initialize the
iterator and call an RCU synchronization, but this was for each individual
per CPU buffer where this would get called many times on a machine with
many CPUs before the trace file could be read. The commit 72c9ddfd4c5bf
("ring-buffer: Make non-consuming read less expensive with lots of cpus.")
separated ring_buffer_read_start into ring_buffer_read_prepare(),
ring_buffer_read_sync() and then ring_buffer_read_start() to allow each of
the per CPU buffers to be prepared, call the read_buffer_read_sync() once,
and then the ring_buffer_read_start() for each of the CPUs which made
things much faster.
The commit 1039221cc278 ("ring-buffer: Do not disable recording when there
is an iterator") removed the requirement of disabling the recording of the
ring buffer in order to iterate it, but it did not remove the
synchronization that was happening that was required to wait for all the
buffers to have no more writers. It's now OK for the buffers to have
writers and no synchronization is needed.
Remove the synchronization and put back the interface for the ring buffer
iterator back before commit 72c9ddfd4c5bf was applied.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250630180440.3eabb514@batman.local.home
Reported-by: David Howells <dhowells@redhat.com>
Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator")
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Assisted-by: Kiro:claude-opus-4.8
[doebel@amazon.de: move patch section using guard() macro into a
separate block to address declaration after statement warning.]
Signed-off-by: Bjoern Doebel <doebel@amazon.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Wed Jun 17 09:58:18 2026 +0200
tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done
commit bda3348872a2ef0d19f2df6aa8cb5025adce2f20 upstream.
tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to
crypto_aead_decrypt(req) without taking a reference on the netns, unlike
the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously
(e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs
tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the
meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the
per-netns tipc_crypto, and the completion then reads it:
tipc_aead_decrypt_done() dereferences aead->crypto->stats and
aead->crypto->net, and tipc_crypto_rcv_complete() dereferences
aead->crypto->aead[] and the node table -- reading freed memory.
Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO):
BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999)
Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51
Workqueue: events_unbound
Call Trace:
tipc_aead_decrypt_done (net/tipc/crypto.c:999)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 169:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
tipc_crypto_start (net/tipc/crypto.c:1502)
tipc_init_net (net/tipc/core.c:72)
ops_init (net/core/net_namespace.c:137)
setup_net (net/core/net_namespace.c:446)
copy_net_ns (net/core/net_namespace.c:579)
create_new_namespaces (kernel/nsproxy.c:132)
__x64_sys_unshare (kernel/fork.c:3316)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Freed by task 8:
kfree (mm/slub.c:6566)
tipc_exit_net (net/tipc/core.c:119)
cleanup_net (net/core/net_namespace.c:704)
process_one_work (kernel/workqueue.c:3314)
kthread (kernel/kthread.c:436)
This is the same class of bug that commit e279024617134 ("net/tipc: fix
slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt
side. The encrypt path takes maybe_get_net(aead->crypto->net) before
crypto_aead_encrypt() and drops it with put_net() on the synchronous
return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY
return keeps the reference for the async callback to release. The decrypt
path was left without the equivalent guard.
Mirror the encrypt-side fix on the decrypt path: take a net reference
before crypto_aead_decrypt() (failing with -ENODEV and the matching
bearer put if it cannot be acquired), keep it across the
-EINPROGRESS/-EBUSY async return, and drop it with put_net() on the
synchronous success/error return and at the end of
tipc_aead_decrypt_done().
Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is
flooded with crafted encrypted frames from an unknown peer (driving the
cluster-key decrypt path) while the bearer's netns is repeatedly torn
down. The completion must run asynchronously to outlive
tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts
synchronously, so the async path was exercised via cryptd offload. The
unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the
unpatched upstream path; tipc_aead_decrypt() still lacks
maybe_get_net(aead->crypto->net), so the completion can outlive the free
on any config where crypto_aead_decrypt() goes async.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617075818.37431-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yi Yang <yiyang13@huawei.com>
Date: Thu Jun 4 06:07:34 2026 +0000
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
commit a287620312dc6dcb9a093417a0e589bf30fcf38a upstream.
A KASAN null-ptr-deref was observed in vcs_notifier():
BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130
Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {}
The issue is a race condition in vcs_write(). When the console_lock is
temporarily dropped (to copy data from userspace), the vc_data pointer
obtained from vcs_vc() may become stale. After re-acquiring the lock,
vcs_vc() is called again to re-validate the pointer. If the vc has been
deallocated in the meantime, vcs_vc() returns NULL, and the while loop
breaks (with written > 0). However, after the loop, vcs_scr_updated(vc)
is still called with the now-NULL vc pointer, leading to a null pointer
dereference in the notifier chain (vcs_notifier dereferences param->vc).
Fix this by adding a NULL check for vc before calling vcs_scr_updated().
Fixes: 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260604060734.2914976-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiacheng Shi <billsjc@sjtu.edu.cn>
Date: Sun Dec 12 01:16:00 2021 -0800
vfio/iommu_type1: replace kfree with kvfree
[ Upstream commit 2bed2ced40c97b8540ff38df0149e8ecb2bf4c65 ]
Variables allocated by kvzalloc should not be freed by kfree.
Because they may be allocated by vmalloc.
So we replace kfree with kvfree here.
Fixes: d6a4c185660c ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn>
Link: https://lore.kernel.org/r/20211212091600.2560-1-billsjc@sjtu.edu.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miklos Szeredi <mszeredi@redhat.com>
Date: Thu May 28 10:58:24 2026 +0200
virtiofs: fix UAF on submount umount
commit 06b41351779e9289e8785694ade9042ae85e41ea upstream.
iput() called from fuse_release_end() can Oops if the super block has
already been destroyed. Normally this is prevented by waiting for
num_waiting to go down to zero before commencing with super block shutdown.
This only works, however, for the last submount instance, as the wait
counter is per connection, not per superblock.
Revert to using synchronous release requests for the auto_submounts case,
which is virtiofs only at this time.
Reported-by: Aurélien Bombo <abombo@microsoft.com>
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Greg Kurz <gkurz@redhat.com>
Closes: https://github.com/kata-containers/kata-containers/issues/12589
Fixes: 26e5c67deb2e ("fuse: fix livelock in synchronous file put from fuseblk workers")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <gkurz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Date: Mon Apr 20 13:01:29 2026 +0200
wifi: ath11k: fix warning when unbinding
commit 8b7a26b6681922a38cd5a7829ace61f8e54df9b7 upstream.
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath11k_pci),
and we get:
WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90
Call Trace:
free_large_kmalloc
ath11k_dp_free
ath11k_core_deinit
ath11k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420110130.509670-1-jtornosm@redhat.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zenm Chen <zenmchen@gmail.com>
Date: Tue Apr 7 23:44:30 2026 +0800
wifi: mt76: mt76x2u: Add support for ELECOM WDC-867SU3S
commit f4ce0664e9f0387873b181777891741c33e19465 upstream.
Add the ID 056e:400a to the table to support an additional MT7612U
adapter: ELECOM WDC-867SU3S.
Compile tested only.
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260407154430.9184-1-zenmchen@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Sat Apr 25 22:32:58 2026 +0300
wifi: rtlwifi: rtl8821ae: Fix C2H bit location in RX descriptor
commit 83d38df6929118c3f996b9e3351c2d5014073d87 upstream.
Bit 28 of double word 2 in the RX descriptor indicates if the packet is
a normal 802.11 frame, or a message from the wifi firmware to the
driver (Card 2 Host).
Commit f5678bfe1cdc ("rtlwifi: rtl8821ae: Replace local bit manipulation
macros") mistakenly made the driver look for this bit in double word 1,
causing packet loss and Bluetooth coexistence problems.
Fixes: f5678bfe1cdc ("rtlwifi: rtl8821ae: Replace local bit manipulation macros")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/04da7398-cedb-425a-a810-5772ab10139d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mathias Nyman <mathias.nyman@linux.intel.com>
Date: Tue Jun 23 20:49:38 2026 -0700
xhci: fix memory leak regression when freeing xhci vdev devices depth first
commit edcbe06453ddfde21f6aa763f7cab655f26133cc upstream
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb03376151b ("usb: xhci: Fix slot_id resource race conflict")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Suggested-by: David Wang <00107082@163.com>
Cc: stable@vger.kernel.org
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>