>[оверквотинг удален]
>>>
>>
>>Cisco 6500/sup32
>>Cisco 6500/sup720
>>Cisco 7600/sup32
>>Cisco 7600/sup720
>>Cisco 7600/rsp720
>>Cisco ME6524
>
>И как такое сделать ?

User-Based Rate Limiting (UBRL) on the Cisco Catalyst 6500 Supervisor Engine 32 and Cisco Catalyst 6500 Series Supervisor Engine 720 with Cisco IOS Software Only
User-Based Rate Limiting functionality is supported only on the Cisco Catalyst 6500 Supervisor Engine 32 and Cisco Catalyst 6500 Series Supervisor Engine 720 and is a microflow policing function which provides a means to rate limit many source or destination IP addresses to an individual rate. This configuration requires only two ACLs and can support a large number of users. Only supported in Cisco IOS Software, the example below demonstrates UBRL by rate limiting traffic from each user in a user-group to 1 Mbps each, going to the subnet 192.168.0.0/16:

Access-list 101 permit ip any 192.168.0.0 0.0.255.255

Class-map 1Mbps-rate

Match access-group 101

Policy-map Outbound

Class 1Mbps-rate

Police flow mask src-only 1000000 ...

Int gig 3/1

Service-policy input Outbound

подробности на Cisco.com по ключевому слову Configuring UBRL