У меня такая проблема. Поставил ALTLinux Desktop 4.0 на нотик. Все прекрасно, но нет зука. Перечитал форум. Сделал по аналогии. Либо при загрузка пищит как резанный, либо загружается без писка но звук работает только тогда, когда воткну наушники а потом их выйму.
Че за трабла. Неужели Линуксы перестали правильно работать с железом.

Доброго времени суток. Есть ноут, есть линукс. Надо настроить железо так, чтобы оно все работало.  Проблема в том, что драйвера на сайте производителя под лин не лежат. Хочу драйвера для: (оговорюсь - драйвера на видео и вайфай, блутуз есть. Не работает кардридер, модем и глючит звук)

Pollux:/home/cats# lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc M52 [ATI Mobility Radeon X1300]
06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
06:02.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
06:04.4 FLASH memory: ENE Technology Inc Unknown device 0551 (rev 01)

ПыСы. в ядре драйверов нет или те, что работают через 3 раза :(

Всем привет
Имею сабж в распоряжении - крутится под Debian unstable,  с последним ядром

uname -a
Linux tau-ceti 2.6.26.2 #1 Thu Aug 14 23:35:10 MSD 2008 i686 GNU/Linux

вифи-карточка:
lspci -vvv
01:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
        Subsystem: Device 1a3b:1026
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 128 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
                Vector table: BAR=0 offset=00000000
                PBA: BAR=0 offset=00000000
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [140] Virtual Channel <?>
        Kernel driver in use: ath_pci
        Kernel modules: ath_pci, ath5k

Кто знает как ее включить в режим Access Point?
вот попытка:

sva@tau-ceti:~$ sudo iwconfig ath0 mode master
Error for wireless request "Set Mode" (8B06) :
    SET failed on device ath0 ; Invalid argument.

Работает только в режиме managed другие никак не включаются
драйвера стоят - AR5007EG-Madwifi3745-AircrackPatched-HAL10.5.6.tar.gz , откопал где то на форумах убунту по идее как раз под этот чипсет, до этого ставил madwifi trunk - не помогло
Может кто сталкивался?

Доброго времени суток.
Вот собрался себе купить зверька Asus eeePC 701 (пока у нас в городе только такой :( ).
Предустановленный там тока мастдай :( У кого был опыт перехода с WinXP на линукс на данном
девайсе? Какие были грабли?
Если кто-то может подсказать более умный выбор железяки, похожей по габаритам и
за нормальные деньги, то подскажите :) лучше знать все варианты.
Заранее спасибо за ответы.

Слышал что у многих бывают проблемы с ноутами изза отсутствия дров, в основном с блютуз и вайфай.. плз посоветуйте какой ноут выбрать + дистриб для него.

Доброго времени суток!
Дайте, пожалуйста, совет или подскажите статью про то, как поднять полноценный *nix на USB Flash. Под словом "полноценны" подразумевается монтирование раздела в режиме read-write (т.с. не как LiveCD, на котором ничего нельзя изменить в настройках).
Прочел кучу статей и перепробовал много вариантов... Кроме LiveCD ничего не получалось((.
Возможно, USB-Flash нужно "переделать" в USB-HDD. Как это можно сделать для SD-карточек KingMax?
Заранее спасибо!

Добрый день, Уважаемые.

Знаю что такие темы подымаются с постоянной периодичностью, но все же

Попался под руку 4-5 летний бук RoverBook Explorer E575
на борту
Intel® Pentium® 4 2800МГц
256Мб
20Гб
DVD-ROM/CD-RW
15.1” TFT (1400x1050)
ATI M9 (Radeon 9000) Видеопамять 64Мб DDR SDRAM
Совместима с AC'97 Встроенные динамики и микрофон
Факс/Модем: Факс-модем V.90 Lan: Локальная сеть Ethernet 10Base-T/100Base-TX
«3 в 1» (SD/MMC/MS)

Нужен легкий дистрибутив, десктоп ориентированый, с обязательной подержкой русского языка.

Цели использования: Серфинг, Тексты, Программирование (системное и прикладное).

Допущения :
При некотором "скрипе зубами" готов полностью пересобрать систему, если это даст необходимый результат в итоге.

Предпочтения: На базе bsd и если руки не справятся, то linux

Также не откажусь от помощи (и чуткого руководства) по доводке

Здравствйте.  Я понимаю, что дело не благодарное - Ставить Фрю на ноут(Acer Aspire 3684). Но вот все же попытался.. И пытаюсь уже 3 дня.  И разочаровался довольно серъёзно. Может вы мне поможете..

Вобщем сама проблема.

Я так понимаю У меня вся проблема в ACPI.
При загрузке с ACPI:

Сетевуху(Marvell) Не определяет, пищет, что марвел, а потом пишет, что неизвестный девайс.
Вай-фай(Atheros) - Определяет, но зааттачить не может.

При загрузке без ACPI:
Сетевуху определяет, но она периодически падает и встает. С периодичность в 10 минут примерно.
Вай-фай  -Определяет, но если я пытаюсь обращаться к нему - Пишет - Девайс не отвечает по таймоуту.
(Видимо Сей девайс включаеться через ACPI)
Как-то получилось у меня 1 раз завести вай-фа(при запущеном  КДЕ это было) Но не на долго, он опять отвалился и Фря мне вывалила ошибку ТАймОута.

Чего я только не перепробовал С ACPI делать. Весь инет перерыл, разные конфиги для него пытался юзать - Ничего.

Что интересно - Есть прожект такой http://code.google.com/p/aceracpi/
Но он под Линукс :(
Есть ли возможность скомпилить его под БСД ? Как вы считаете ?

http://aceracpi.googlecode.com/svn/trunk/dsdt/acer/aspire/ - ТУт лежат готовые ACPI под модели ACER, Но я пробовал их скармливать iasl. Он выдавал кучу ошибок, при загрузке - Паника.

Есть у вас какие нибудь мысли по этому поводу ?

Буду рад любой помощи ;-)

Вкратце опишу проблема: Недавно купил себе ноутбук Toshiba на нем стояла виста я ее снес и поставил ubuntu... из проблем только неподнялся bluetooth и модем... с первой проблемой я разобрался а вот с модемом незаню что делать вот:
cpu@hell-cpu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller (rev 01)
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
0c:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0c:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0c:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
cpu@hell-cpu:~$ lsusb
Bus 007 Device 001: ID 0000:0000  
Bus 003 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 003 Device 001: ID 0000:0000  
Bus 006 Device 001: ID 0000:0000  
Bus 005 Device 001: ID 0000:0000  
Bus 004 Device 002: ID 09da:000a A4 Tech Co., Ltd
Bus 004 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 002: ID 0930:0508 Toshiba Corp.
Bus 001 Device 001: ID 0000:0000  
Помогите ПЛЗ настроить!!!
Зарание благодарен

Народ!!! Пожалуйста помогите кто чем может!!! ставлю линух Рунту на бук Acer Aspire 5310, звук прописывается, а звуку нэту убунту ставлю 7.10 тоже немае На Дебиане есть но его ставить неохотца там ваще сложно с о всем остальным!!!

Появился дома ноут, от Ровербука.
при загрузке с отключенным АЦПИ валится при тестировании wfochi0 с криками
PCI System Error on Bus/Device/Function 0001h
PCI System Error on Bus/Device/Function 0080h

Ну и потом
Ram parity error, Fatal trap 19 и все такое.

внимание вопрос. как отрубить этот фаерваер ввиду его а) ненадобностью для задач, б) из-за него не могу поставить фрю.

в биосе не отрубается. там нет такого пункта.

Добрый день
поставил slackware 12 на ноутбук fsc amillo pi 2515 на чипсете 965gm, всё работает, но отсутствует direct rendering; все нужные модули грузятся i915, dri, agp_gart, но в логах  - режим не включается;
если кто сталкивался с подобными проблемами - напишите;
С уважением Эрил

логи

Xorg.0

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux darkstar 2.6.21.5 #1 SMP Sat Apr 12 21:13:45 EEST 2008 i686
Build Date: 09 May 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 15 23:25:16 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "** Intel i810 (generic)               [i810]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
    /usr/share/fonts/TTF,
    /usr/share/fonts/OTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi/:unscaled,
    /usr/lib/X11/fonts/misc/,
    /usr/lib/X11/fonts/75dpi/:unscaled,
    /usr/lib/X11/fonts/100dpi/:unscaled,
    /usr/lib/X11/fonts/Speedo/,
    /usr/lib/X11/fonts/Type1/,
    /usr/lib/X11/fonts/TTF/,
    /usr/lib/X11/fonts/OTF/,
    /usr/lib/X11/fonts/cyrillic/,
    /usr/lib/X11/fonts/75dpi/,
    /usr/lib/X11/fonts/100dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dcd60
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.2
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 1734,1108 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2a02 card 1734,1108 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2a03 card 1734,1108 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1a:0: chip 8086,2834 card 1734,1108 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 1734,1108 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 1734,1108 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2843 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 1734,1108 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 1734,1108 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2815 card 1734,1108 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 1734,1108 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 1734,1108 rev 03 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,283e card 1734,1108 rev 03 class 0c,05,00 hdr 00
(II) PCI: 04:00:0: chip 8086,4222 card 8086,1001 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:00:0: chip 10ec,8136 card 1734,1108 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,8), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
    [0] -1    0    0x00002000 - 0x000020ff (0x100) IX
    [1] -1    0    0x00002400 - 0x000024ff (0x100) IX
    [2] -1    0    0x00002800 - 0x000028ff (0x100) IX
    [3] -1    0    0x00002c00 - 0x00002cff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
    [0] -1    0    0xf6000000 - 0xf7ffffff (0x2000000) MX
(II) Bus 2 prefetchable memory range:
    [0] -1    0    0xf0000000 - 0xf1ffffff (0x2000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
    [0] -1    0    0x00003000 - 0x000030ff (0x100) IX
    [1] -1    0    0x00003400 - 0x000034ff (0x100) IX
    [2] -1    0    0x00003800 - 0x000038ff (0x100) IX
    [3] -1    0    0x00003c00 - 0x00003cff (0x100) IX
(II) Bus 4 non-prefetchable memory range:
    [0] -1    0    0xf8000000 - 0xf9ffffff (0x2000000) MX
(II) Bus 4 prefetchable memory range:
    [0] -1    0    0xf2000000 - 0xf3ffffff (0x2000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:28:3), (0,6,7), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
    [0] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [1] -1    0    0x00004400 - 0x000044ff (0x100) IX
    [2] -1    0    0x00004800 - 0x000048ff (0x100) IX
    [3] -1    0    0x00004c00 - 0x00004cff (0x100) IX
(II) Bus 6 non-prefetchable memory range:
    [0] -1    0    0xfa000000 - 0xfbffffff (0x2000000) MX
(II) Bus 6 prefetchable memory range:
    [0] -1    0    0xf4000000 - 0xf5ffffff (0x2000000) MX
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:30:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation Mobile Integrated Graphics Controller rev 3, Mem @ 0xfc000000/20, 0xd0000000/28, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile Integrated Graphics Controller rev 3, Mem @ 0xfc100000/20
(II) Addressable bus resource ranges are
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX
    [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [5] -1    0    0x00000000 - 0x000000ff (0x100) IX
(II) Active PCI resource ranges:
    [0] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [1] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [2] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [3] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [4] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [5] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [6] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [7] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [8] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [9] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [10] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [11] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [12] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [13] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [14] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [15] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [16] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [17] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [18] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [19] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [20] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [21] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [22] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [23] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [24] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [25] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [26] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [27] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
(II) Active PCI resource ranges after removing overlaps:
    [0] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [1] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [2] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [3] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [4] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [5] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [6] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [7] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [8] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [9] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [10] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [11] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [12] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [13] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [14] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [15] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [16] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [17] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [18] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [19] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [20] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [21] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [22] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [23] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [24] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [25] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [26] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [27] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [5] -1    0    0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [5] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [6] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [7] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [8] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [9] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [10] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [11] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [12] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [13] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [15] -1    0    0x00000000 - 0x000000ff (0x100) IX
    [16] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [17] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [18] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [19] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [20] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [21] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [22] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [23] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [24] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [25] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [26] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [27] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [28] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [29] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [30] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [31] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [32] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [33] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.3.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 2.0.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.2.99.905, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ, 965GM
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 965GM found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [5] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [6] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [7] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [8] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [9] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [10] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [11] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [12] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [13] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [15] -1    0    0x00000000 - 0x000000ff (0x100) IX
    [16] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [17] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [18] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [19] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [20] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [21] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [22] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [23] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [24] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [25] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [26] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [27] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [28] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [29] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [30] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [31] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [32] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [33] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
(II) resource ranges after probing:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [5] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [6] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [7] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [8] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [9] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [10] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [11] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [12] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [13] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [14] 0    0    0x000a0000 - 0x000affff (0x10000) MS
    [15] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS
    [16] 0    0    0x000b8000 - 0x000bffff (0x8000) MS
    [17] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [18] -1    0    0x00000000 - 0x000000ff (0x100) IX
    [19] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [20] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [21] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [22] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [23] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [24] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [25] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [26] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [27] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [28] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [29] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [30] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [31] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [32] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [33] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [34] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [35] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [36] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
    [37] 0    0    0x000003b0 - 0x000003bb (0xc) IS
    [38] 0    0    0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.2
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFC000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
    for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) intel(0): Output VGA using monitor section My Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT  Model: 1415  Serial#: 0
(II) intel(0): Year: 2007  Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336   greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0):  CPT
(II) intel(0):  CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e14151400000000
(II) intel(0):     22110103802115780a092d9d564f9027
(II) intel(0):     21505400000001010101010101010101
(II) intel(0):     010101010101ea1a008050200d301820
(II) intel(0):     13004bcf100000190000000f00202020
(II) intel(0):     2020202020206e050f00000000fe0043
(II) intel(0):     50540a202020202020202020000000fe
(II) intel(0):     00434c414131353457423035412000c1
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7616 kB
(II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT  Model: 1415  Serial#: 0
(II) intel(0): Year: 2007  Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336   greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0):  CPT
(II) intel(0):  CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e14151400000000
(II) intel(0):     22110103802115780a092d9d564f9027
(II) intel(0):     21505400000001010101010101010101
(II) intel(0):     010101010101ea1a008050200d301820
(II) intel(0):     13004bcf100000190000000f00202020
(II) intel(0):     2020202020206e050f00000000fe0043
(II) intel(0):     50540a202020202020202020000000fe
(II) intel(0):     00434c414131353457423035412000c1
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0    0    0xd0000000 - 0xdfffffff (0x10000000) MS
    [1] 0    0    0xfc000000 - 0xfc0fffff (0x100000) MS
    [2] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [3] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [4] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [5] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [6] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [7] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [8] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [9] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [10] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [11] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [12] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [13] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [14] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [15] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [16] 0    0    0x000a0000 - 0x000affff (0x10000) MS(OprD)
    [17] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS(OprD)
    [18] 0    0    0x000b8000 - 0x000bffff (0x8000) MS(OprD)
    [19] 0    0    0x00001800 - 0x00001807 (0x8) IS
    [20] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [21] -1    0    0x00000000 - 0x000000ff (0x100) IX
    [22] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [23] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [24] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [25] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [26] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [27] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [28] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [29] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [30] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [31] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [32] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [33] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [34] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [35] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [36] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [37] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [38] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [39] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
    [40] 0    0    0x000003b0 - 0x000003bb (0xc) IS(OprU)
    [41] 0    0    0x000003c0 - 0x000003df (0x20) IS(OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
           large DRI memory manager reservation:
(II) intel(0): Allocating 4032 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00040000-0x01a2ffff: front buffer (26560 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x01a30000-0x01a3ffff: xaa scratch (64 kB)
(II) intel(0): 0x01a40000-0x01e27fff: back buffer (4000 kB)
(II) intel(0): 0x01e28000-0x0220ffff: depth buffer (4000 kB)
(II) intel(0): 0x02210000-0x0420ffff: textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) intel(0): [drm] drmOpen failed
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
        32 128x128 slots
        29 256x256 slots
        10 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a30000 (pgoffset 6704)
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00000010, display A pte
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Failed
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT  Model: 1415  Serial#: 0
(II) intel(0): Year: 2007  Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336   greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0):  CPT
(II) intel(0):  CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e14151400000000
(II) intel(0):     22110103802115780a092d9d564f9027
(II) intel(0):     21505400000001010101010101010101
(II) intel(0):     010101010101ea1a008050200d301820
(II) intel(0):     13004bcf100000190000000f00202020
(II) intel(0):     2020202020206e050f00000000fe0043
(II) intel(0):     50540a202020202020202020000000fe
(II) intel(0):     00434c414131353457423035412000c1
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT  Model: 1415  Serial#: 0
(II) intel(0): Year: 2007  Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336   greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0):  CPT
(II) intel(0):  CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e14151400000000
(II) intel(0):     22110103802115780a092d9d564f9027
(II) intel(0):     21505400000001010101010101010101
(II) intel(0):     010101010101ea1a008050200d301820
(II) intel(0):     13004bcf100000190000000f00202020
(II) intel(0):     2020202020206e050f00000000fe0043
(II) intel(0):     50540a202020202020202020000000fe
(II) intel(0):     00434c414131353457423035412000c1
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

---------------------------------------------------------------------------------------
xorg.conf

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"      # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath    "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/TTF"
    FontPath   "/usr/share/fonts/OTF"
    FontPath   "/usr/share/fonts/Type1"
    FontPath   "/usr/share/fonts/misc"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/local/"
    FontPath   "/usr/lib/X11/fonts/misc/"
    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/lib/X11/fonts/Speedo/"
    FontPath   "/usr/lib/X11/fonts/Type1/"
    FontPath   "/usr/lib/X11/fonts/TTF/"
    FontPath   "/usr/lib/X11/fonts/OTF/"
    FontPath   "/usr/lib/X11/fonts/cyrillic/"
    FontPath   "/usr/lib/X11/fonts/75dpi/"
    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier    "Keyboard1"
    Driver    "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option    "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"    "xorg"
    Option "XkbModel"    "pc105"
    Option "XkbLayout"    "us"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier    "Mouse1"
    Driver    "mouse"
    Option "Protocol"    "Auto"    # Auto detect
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"    "Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"    "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"    "9600"
#    Option "SampleRate"    "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5

#    HorizSync    30-64         # multisync
#    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-70

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier    "Standard VGA"
    VendorName    "Unknown"
    BoardName    "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam    256

#    Clocks    25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "** Intel i810 (generic)               [i810]"
    Driver      "i810"
    #VideoRam    262144
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "** Intel i810 (generic)               [i810]"
    Monitor     "My Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1600 1280
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1280 1024
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024"
        ViewPort    0 0
        Virtual     1280 800
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
    Mode 0666
EndSection

купила себе это чудо, снесли Висту, накачали дров, все установили, а с блютусом проблемы...плиз, потомгите кто чем может...

Есть ровер р4 я хочу поставить на него линукс. Если это возможно то подскажите как это сделать и какой дистрибутив выдрать. Сам поставил недавно Мандриву - понравилось.... вот решил поспрошать мож кто поможет с кпк???
Большое спосибо...

Вобщем проблема такова, поставил на древний ноутбук Linux Mandriva 2008.
Все с виду работает нормально, только не может нормально заработать сетевая карточка (соответственно встроенная).

В "Настройка сети и Интернета" предлагает выбрать сетевой интерфейс для настройки. Там только один.
Silicon Integrated Systems [sis] sis900 PCI Fast Ethernet
соответственно выбираю его и нажимаю далее. И тут сообщение от drakconnect "Невозможно найти сетевой интерфейс для выбранного устройства (используя драйвер sis900)" и тютю.

Вторая проблема в том что я первый раз поставил линукс вообще, и если у когото будут варианты лечения этой проблемы, распишите пожалуйста подробнее :)

Есть ноутбук и есть GPRS,которая идет через ноут.Мне нужно,чтобы не вытаскивая симку из  GPRS отсылать Cмс)

Привет. Возник вопрос.
Есть ноутбук ASUS X51RL. Внутри встроенная карточка Atheros AR5006X. Я поставил Gentoo Linux (ядро 2.6.23-r8)на ноут и пытаюсь настроить wifi интерфейс. Взял самый новый драйвер с www.madwifi.org и устанавливал четко по инструкции (make && make install && modprobe ath_pci). Сборка и установка прошли успешно. Драйвер загрузился без ошибок, но интерфейса ath0 не появилось((
После перезагрузки посмотрел в dmesg: wifi%d: unable to attach hardware: revision isn't supported (HAL status 13) // пишу по памяти, так что возможны незначительные несовпаддения
Если кто знает как это лечится пишите.

Всем доброго времени суток!
Есть ноут FujitsuSiemens AMILO M1425, встроенный win-модем на базе чипсета SmartLink, ОС: Mandriva 2007 Spring, ALTLinux 4.0 Desktop. Драйвер для модема (slmodem) установлен, опрос модема выполняется. Через kppp настроено 2 соединения.
Проблема: при установке соединения появляется сообщение "нет несущей", в окне терминала наблюдаю отклик на команду инициализации модема, после команды набора номера сразу появляется NO CARRIER, ERROR

Кто знает, что можно сделать? Заранее благодарю

Как завести встроенные в ноут модем:

00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)

в slmodem-2.9.10 объявленна поддержка только:
- Intel ICH0,ICH2, ICH3, ICH4

пробую собрать: make проходит без ошибок. make install выдает
следующее

make[4]: *** [/usr/src/slmodem-2.9.10/drivers/st7554.o] Ошибка 1
make[3]: *** [_module_/usr/src/slmodem-2.9.10/drivers] Ошибка 2
make[3]: Leaving directory `/usr/src/linux-2.6.13'
make[2]: *** [all] Ошибка 2
make[2]: Leaving directory `/usr/src/slmodem-2.9.10/drivers'
make[1]: *** [all] Ошибка 2
make[1]: Leaving directory `/usr/src/slmodem-2.9.10/drivers'
make: *** [drivers] Ошибка 2

Slackware 10.2, 2.6.16.11

Попытался установить Suse 10.2 на Amilo Xa 1256, столкнулся со следующими проблемами:
1. Не работает модем(HDAUDIO with SmartCP - по данным Win).
2. Не работает WiFi(Sis163u - по данным Win). Есть ли нативные драйвера или сразу копать в сторону ndiswrapper?
3. Функциональные кнопки: регулятор громкости забиндил в настройках гнома, при нажатии появляется окошко с громкостью, но эффекта никакого, похоже что регулируется громкость какого-то не того канала, где это можно настроить?
4. Функциональные кнопки: как настроить управление яркостью подсветки матрицы?
5. В Win есть поддержка кнопки полного выключения вентилятора с понижением частоты проца и видеокарты. Есть ли аналог в Linux?
Буду рад любым советам.

Вопрос, есть ли возможность подключить Палм к нету через блютух с помощью SE710i и где мона взять новые дрова на телы (Если конечно это возможно)?

Постаивл хФце, запускается, но окошки не удается перетаскивать, сворачивать/разворачивать.
Набор пакетов такой
# pkg_info|grep xfce
libxfce4util-4.2.3.2nb2 Xfce basic library
libxfce4gui-4.2.3nb4 Xfce widget library
libxfce4mcs-4.2.3nb2 Xfce settings management library
xfce4-mcs-manager-4.2.3nb4 Xfce settings manager
xfce4-mcs-plugins-4.2.3nb4 Xfce settings manager plugins
xfce4-wm-4.2.3.2nb4 Xfce window manager
xfce4-panel-4.2.3nb4 Xfce panel
xfce4-desktop-4.2.3nb4 Xfce desktop background manager
xfce4-mixer-4.2.3nb4 Xfce mixer plugin
xfce4-icon-theme-4.2.3nb1 Xfce icon themes
xfce4-iconbox-4.2.3nb4 Xfce icon displayer
xfce4-print-4.2.3nb4 Xfce print dialog
xfce4-appfinder-4.2.3nb3 Xfce application finder
xfce4-fm-4.2.3nb4 Xfce filemanager
xfce4-systray-4.2.3nb3 Xfce systray plugin
xfce4-calendar-4.2.3nb4 Xfce calendar
xfce4-wm-themes-4.2.3nb3 Xfce window manager themes
xfce4-gtk2-engine-2.2.8nb4 Xfce GTK2 themes
xfce4-session-4.2.3nb4 Xfce session manager
xfce4-toys-4.2.3nb3 Xfce toys
xfce4-trigger-launcher-4.2.3nb3 Xfce trigger-launcher
xfce4-utils-4.2.3nb6 Xfce utilities
xfce4-4.2.3.2nb3 Xfce

После старта хФце запускал в терминале xfwm4, но он выдал ошибку...
No fonts found; this probably means that the fontconfig
library is not correctly configured. You may need to
edit the fonts.conf configuration file. More information
about fontconfig can be found in the fontconfig(3) manual
page and on http://fontconfig.org

Почему не работает?

Доброго времени суток.
Возникла потребность в связке мобильника и компьютера
посредством bluetooth.
Поставил bluez*, obex*. Проблема собственно:
сканирование нормально:
Scanning ...
        00:1E:A3:E0:0F:F0       Nokia 3110c
а вот с коннектом проблемы:
[root@naquad obexfs-0.8]# hcitool cc 00:1E:A3:E0:0F:F0
[root@naquad obexfs-0.8]# echo $?
0
[root@naquad obexfs-0.8]# hcitool con
Connections:
[root@naquad obexfs-0.8]#

таким образом просто не соединяется и файлы не перебрасывает :(
Как заставить это всё работать - ума не приложу :(
В одних мануалах говорят о rfcomm в других о hidd, в третьих о sdpd, а в
четвёртых о hcid.
Где правда и как заставить это работать?
На всяк пожарный:
/etc/bluetooth/hcid.conf
options {
        autoinit yes;
        security auto;
        pairing multi;
        passkey "5412";
}
device {
        name "Naquad (Linux)";
        class 0x120104;
        pkt_type DH1,DM1,HV1;
        iscan enable; pscan enable;
        lm accept;
        lp rswitch,hold,sniff,park;
        auth enable;
        encrypt enable;
}

/etc/sysconfig/hidd:
HIDDARGS="--server"

hciconfig -a:
hci0:   Type: USB
        BD Address: 00:11:67:5A:BC:68 ACL MTU: 678:8 SCO MTU: 48:10
        UP RUNNING PSCAN
        RX bytes:18270 acl:151 sco:0 events:613 errors:0
        TX bytes:9067 acl:151 sco:0 commands:275 errors:0
        Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'Naquad (Linux)'
        Class: 0x120104
        Service Classes: Networking, Object Transfer
        Device Class: Computer, Desktop workstation
        HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x1fe
        Manufacturer: Integrated System Solution Corp. (57)

P.S. Конечная задача: побросаться файлами и поюзать интернет-соединение телефона.

Добрый день, вопрос такой :
Купил себе ноут HP Compaq 6720s. С ним в комплектации нет ни одного диска, машинка оборудована Windows Vista. На официальном сайте дрова вроде то же только для висты и для ХР. Есть где нибудь дрова для линукса?

установил, сконфигурировал, пересобрал, запустил...
Звук есть, но отвратительный.

Судя по тому что я слышу - буфер DMA вычитывается гораздо быстрее чем нужно.
Идет очень короткий звук с заметно завышеннойтональностью, короткая пауза тишины, и вся опять, с начала. (за секунду проходит несколько таких периодов)

Снова собрал GENERIC, загрузился, подгрузил snd_ich - все тоже самое.

Думал что проблема с timecounter - по слухам FreeBSD не отслеживает динамические изменения частоты TSC, но замена на i8254 никак не повлияла

Не могу понять где копать. Скажите если есть хоть какие-то идеи.

root@dimen# uname -sr
FreeBSD 6.0-RELEASE

root@dimen# kldstat
Id Refs Address    Size     Name
1   15 0xc0400000 387bec   kernel
2   16 0xc0788000 5683c    acpi.ko
3    1 0xc1468000 2000     msdosfs_iconv.ko
4    2 0xc146a000 3000     libiconv.ko
5    1 0xc1746000 4000     logo_saver.ko
6    2 0xc1758000 15000    linux.ko
7    1 0xc17f6000 2000     rtc.ko
8    1 0xc18a3000 2000     cd9660_iconv.ko

root@dimen# dmesg |grep pcm
pcm0: <Intel ICH4 (82801DB)> port 0xe000-0xe0ff,0xe100-0xe13f at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC650 AC97 Codec>

root@dimen# pciconf -lv
[skip]
pcm0@pci0:31:5: class=0x040100 card=0x18931043 chip=0x24c58086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
[skip]

root@dimen# cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Intel ICH4 (82801DB)> at io 0xe000, 0xe100 irq 17 bufsz 16384  (1p/1r/4v channels duplex default)

root@dimen# mixer
Mixer vol      is currently set to 100:100
Mixer pcm      is currently set to 100:100
Mixer speaker  is currently set to  80:80
Mixer line     is currently set to   0:0
Mixer mic      is currently set to   0:0
Mixer cd       is currently set to   0:0
Mixer rec      is currently set to   0:0
Mixer ogain    is currently set to   0:0
Mixer line1    is currently set to   0:0
Mixer phin     is currently set to   0:0
Mixer phout    is currently set to   0:0
Mixer video    is currently set to   0:0
Recording source: vol

PS - Win XP ставит другой кодек (реалтековский) но я не нашел разницы в исходниках ядра BSD по обработке этих кодеков :-)

Доброго времени суток. Возникла проблема, из за которой до сих пор радую форточки своим присутствием... Не могу организовать gprs через Motorola a1200e (Ming).
Мандриву только что поставил, и освоение будет намного легче, при наличии в последней инета.
Пытаюсь шагнуть в мир пингвинов....эх....
Заранее благодарен Вам за отзывы и помощь в моей проблеме.

Здрасте. Я занимаюсь установкой пингвина на свой кпк. Устанавливаю Фамилиар. Максимум чего я добился: 10% при запуске haret.exe появляется толстая зелёная полоска и кпк намертво повисает. 90% появляется много тоненьких полосочек(~6шт) и повисает. Подскажите пожалуйста, что означают эти полосочки(я читал на handhelds.org что это мол уровни инциализации...непонял). А также дайте пару ссылок на сайты, этим занимающимся(не мёртвые) заранее благодарен. :о)

Приобрёл ACER TM 5520G встроенная сетевая Marvell Yukon 88E8071, на сайте марвелл последний драйвер mykbsd60x86-8.14.9.3, только бубен, не хочет с ним сетевуха подниматся, ядро не компилится с device myk запуск модулем kldload ./if_myk.ko не помогает, кто столкнулся с данной проблемой и смог решить пожалста подскажите куда копать, все возможные темы тут на форумах уже прочёл и попробовал, не катит. Гугл не помог...

День добрый всемогущий алл.

Хотелось бы узнать есть возможность утановки Linux на HTC TyTN, если да то скиньте ссылки на прошивки.

Заранее спасибо.