Добрый день
поставил slackware 12 на ноутбук fsc amillo pi 2515 на чипсете 965gm, всё работает, но отсутствует direct rendering; все нужные модули грузятся i915, dri, agp_gart, но в логах  - режим не включается;
если кто сталкивался с подобными проблемами - напишите;
С уважением Эрил

логи

Xorg.0

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux darkstar 2.6.21.5 #1 SMP Sat Apr 12 21:13:45 EEST 2008 i686
Build Date: 09 May 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 15 23:25:16 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "** Intel i810 (generic)               [i810]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
    /usr/share/fonts/TTF,
    /usr/share/fonts/OTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi/:unscaled,
    /usr/lib/X11/fonts/misc/,
    /usr/lib/X11/fonts/75dpi/:unscaled,
    /usr/lib/X11/fonts/100dpi/:unscaled,
    /usr/lib/X11/fonts/Speedo/,
    /usr/lib/X11/fonts/Type1/,
    /usr/lib/X11/fonts/TTF/,
    /usr/lib/X11/fonts/OTF/,
    /usr/lib/X11/fonts/cyrillic/,
    /usr/lib/X11/fonts/75dpi/,
    /usr/lib/X11/fonts/100dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dcd60
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.2
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 1734,1108 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2a02 card 1734,1108 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2a03 card 1734,1108 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1a:0: chip 8086,2834 card 1734,1108 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 1734,1108 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 1734,1108 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2843 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 1734,1108 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 1734,1108 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2815 card 1734,1108 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 1734,1108 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 1734,1108 rev 03 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,283e card 1734,1108 rev 03 class 0c,05,00 hdr 00
(II) PCI: 04:00:0: chip 8086,4222 card 8086,1001 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:00:0: chip 10ec,8136 card 1734,1108 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,8), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
    [0] -1    0    0x00002000 - 0x000020ff (0x100) IX
    [1] -1    0    0x00002400 - 0x000024ff (0x100) IX
    [2] -1    0    0x00002800 - 0x000028ff (0x100) IX
    [3] -1    0    0x00002c00 - 0x00002cff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
    [0] -1    0    0xf6000000 - 0xf7ffffff (0x2000000) MX
(II) Bus 2 prefetchable memory range:
    [0] -1    0    0xf0000000 - 0xf1ffffff (0x2000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
    [0] -1    0    0x00003000 - 0x000030ff (0x100) IX
    [1] -1    0    0x00003400 - 0x000034ff (0x100) IX
    [2] -1    0    0x00003800 - 0x000038ff (0x100) IX
    [3] -1    0    0x00003c00 - 0x00003cff (0x100) IX
(II) Bus 4 non-prefetchable memory range:
    [0] -1    0    0xf8000000 - 0xf9ffffff (0x2000000) MX
(II) Bus 4 prefetchable memory range:
    [0] -1    0    0xf2000000 - 0xf3ffffff (0x2000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:28:3), (0,6,7), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
    [0] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [1] -1    0    0x00004400 - 0x000044ff (0x100) IX
    [2] -1    0    0x00004800 - 0x000048ff (0x100) IX
    [3] -1    0    0x00004c00 - 0x00004cff (0x100) IX
(II) Bus 6 non-prefetchable memory range:
    [0] -1    0    0xfa000000 - 0xfbffffff (0x2000000) MX
(II) Bus 6 prefetchable memory range:
    [0] -1    0    0xf4000000 - 0xf5ffffff (0x2000000) MX
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:30:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation Mobile Integrated Graphics Controller rev 3, Mem @ 0xfc000000/20, 0xd0000000/28, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile Integrated Graphics Controller rev 3, Mem @ 0xfc100000/20
(II) Addressable bus resource ranges are
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX
    [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [5] -1    0    0x00000000 - 0x000000ff (0x100) IX
(II) Active PCI resource ranges:
    [0] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [1] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [2] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [3] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [4] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [5] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [6] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [7] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [8] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [9] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [10] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [11] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [12] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [13] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [14] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [15] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [16] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [17] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [18] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [19] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [20] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [21] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [22] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [23] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [24] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [25] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [26] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [27] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
(II) Active PCI resource ranges after removing overlaps:
    [0] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [1] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [2] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [3] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [4] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [5] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [6] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [7] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [8] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [9] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [10] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [11] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [12] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [13] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [14] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [15] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [16] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [17] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [18] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [19] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [20] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [21] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [22] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [23] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [24] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [25] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [26] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [27] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [5] -1    0    0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [5] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [6] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [7] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [8] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [9] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [10] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [11] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [12] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [13] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [15] -1    0    0x00000000 - 0x000000ff (0x100) IX
    [16] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [17] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [18] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [19] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [20] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [21] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [22] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [23] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [24] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [25] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [26] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [27] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [28] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [29] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [30] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [31] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [32] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [33] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.3.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 2.0.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.2.99.905, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ, 965GM
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 965GM found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [5] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [6] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [7] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [8] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [9] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [10] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [11] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [12] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [13] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [15] -1    0    0x00000000 - 0x000000ff (0x100) IX
    [16] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [17] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [18] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [19] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [20] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [21] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [22] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [23] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [24] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [25] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [26] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [27] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [28] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [29] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [30] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [31] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [32] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [33] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
(II) resource ranges after probing:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [5] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [6] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [7] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [8] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [9] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [10] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [11] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [12] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [13] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [14] 0    0    0x000a0000 - 0x000affff (0x10000) MS
    [15] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS
    [16] 0    0    0x000b8000 - 0x000bffff (0x8000) MS
    [17] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [18] -1    0    0x00000000 - 0x000000ff (0x100) IX
    [19] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [20] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [21] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [22] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [23] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [24] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [25] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [26] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [27] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [28] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [29] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [30] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [31] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [32] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [33] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [34] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [35] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [36] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
    [37] 0    0    0x000003b0 - 0x000003bb (0xc) IS
    [38] 0    0    0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.2
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFC000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
    for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) intel(0): Output VGA using monitor section My Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT  Model: 1415  Serial#: 0
(II) intel(0): Year: 2007  Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336   greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0):  CPT
(II) intel(0):  CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e14151400000000
(II) intel(0):     22110103802115780a092d9d564f9027
(II) intel(0):     21505400000001010101010101010101
(II) intel(0):     010101010101ea1a008050200d301820
(II) intel(0):     13004bcf100000190000000f00202020
(II) intel(0):     2020202020206e050f00000000fe0043
(II) intel(0):     50540a202020202020202020000000fe
(II) intel(0):     00434c414131353457423035412000c1
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7616 kB
(II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT  Model: 1415  Serial#: 0
(II) intel(0): Year: 2007  Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336   greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0):  CPT
(II) intel(0):  CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e14151400000000
(II) intel(0):     22110103802115780a092d9d564f9027
(II) intel(0):     21505400000001010101010101010101
(II) intel(0):     010101010101ea1a008050200d301820
(II) intel(0):     13004bcf100000190000000f00202020
(II) intel(0):     2020202020206e050f00000000fe0043
(II) intel(0):     50540a202020202020202020000000fe
(II) intel(0):     00434c414131353457423035412000c1
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0    0    0xd0000000 - 0xdfffffff (0x10000000) MS
    [1] 0    0    0xfc000000 - 0xfc0fffff (0x100000) MS
    [2] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
    [3] -1    0    0x000f0000 - 0x000fffff (0x10000) MX
    [4] -1    0    0x000c0000 - 0x000effff (0x30000) MX
    [5] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX
    [6] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX
    [7] -1    0    0xf8000000 - 0xf8000fff (0x1000) MX
    [8] -1    0    0x88000000 - 0x880000ff (0x100) MX
    [9] -1    0    0xfc404000 - 0xfc4047ff (0x800) MX
    [10] -1    0    0xfc404c00 - 0xfc404fff (0x400) MX
    [11] -1    0    0xfc400000 - 0xfc403fff (0x4000) MX
    [12] -1    0    0xfc404800 - 0xfc404bff (0x400) MX
    [13] -1    0    0xfc100000 - 0xfc1fffff (0x100000) MX(B)
    [14] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX(B)
    [15] -1    0    0xfc000000 - 0xfc0fffff (0x100000) MX(B)
    [16] 0    0    0x000a0000 - 0x000affff (0x10000) MS(OprD)
    [17] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS(OprD)
    [18] 0    0    0x000b8000 - 0x000bffff (0x8000) MS(OprD)
    [19] 0    0    0x00001800 - 0x00001807 (0x8) IS
    [20] -1    0    0x0000ffff - 0x0000ffff (0x1) IX
    [21] -1    0    0x00000000 - 0x000000ff (0x100) IX
    [22] -1    0    0x00004000 - 0x000040ff (0x100) IX
    [23] -1    0    0x00001c20 - 0x00001c3f (0x20) IX
    [24] -1    0    0x000018e0 - 0x000018ff (0x20) IX
    [25] -1    0    0x000018d0 - 0x000018d3 (0x4) IX
    [26] -1    0    0x000018d8 - 0x000018df (0x8) IX
    [27] -1    0    0x000018d4 - 0x000018d7 (0x4) IX
    [28] -1    0    0x00001c00 - 0x00001c07 (0x8) IX
    [29] -1    0    0x00001810 - 0x0000181f (0x10) IX
    [30] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [31] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [32] -1    0    0x000001f0 - 0x000001f0 (0x1) IX
    [33] -1    0    0x000001f0 - 0x000001f7 (0x8) IX
    [34] -1    0    0x000018a0 - 0x000018bf (0x20) IX
    [35] -1    0    0x00001880 - 0x0000189f (0x20) IX
    [36] -1    0    0x00001860 - 0x0000187f (0x20) IX
    [37] -1    0    0x00001840 - 0x0000185f (0x20) IX
    [38] -1    0    0x00001820 - 0x0000183f (0x20) IX
    [39] -1    0    0x00001800 - 0x00001807 (0x8) IX(B)
    [40] 0    0    0x000003b0 - 0x000003bb (0xc) IS(OprU)
    [41] 0    0    0x000003c0 - 0x000003df (0x20) IS(OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
           large DRI memory manager reservation:
(II) intel(0): Allocating 4032 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00040000-0x01a2ffff: front buffer (26560 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x01a30000-0x01a3ffff: xaa scratch (64 kB)
(II) intel(0): 0x01a40000-0x01e27fff: back buffer (4000 kB)
(II) intel(0): 0x01e28000-0x0220ffff: depth buffer (4000 kB)
(II) intel(0): 0x02210000-0x0420ffff: textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) intel(0): [drm] drmOpen failed
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
        32 128x128 slots
        29 256x256 slots
        10 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a30000 (pgoffset 6704)
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00000010, display A pte
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Failed
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT  Model: 1415  Serial#: 0
(II) intel(0): Year: 2007  Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336   greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0):  CPT
(II) intel(0):  CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e14151400000000
(II) intel(0):     22110103802115780a092d9d564f9027
(II) intel(0):     21505400000001010101010101010101
(II) intel(0):     010101010101ea1a008050200d301820
(II) intel(0):     13004bcf100000190000000f00202020
(II) intel(0):     2020202020206e050f00000000fe0043
(II) intel(0):     50540a202020202020202020000000fe
(II) intel(0):     00434c414131353457423035412000c1
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT  Model: 1415  Serial#: 0
(II) intel(0): Year: 2007  Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336   greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0):  CPT
(II) intel(0):  CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e14151400000000
(II) intel(0):     22110103802115780a092d9d564f9027
(II) intel(0):     21505400000001010101010101010101
(II) intel(0):     010101010101ea1a008050200d301820
(II) intel(0):     13004bcf100000190000000f00202020
(II) intel(0):     2020202020206e050f00000000fe0043
(II) intel(0):     50540a202020202020202020000000fe
(II) intel(0):     00434c414131353457423035412000c1
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2   68.90  1280 1304 1336 1408  800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

---------------------------------------------------------------------------------------
xorg.conf

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"      # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath    "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/TTF"
    FontPath   "/usr/share/fonts/OTF"
    FontPath   "/usr/share/fonts/Type1"
    FontPath   "/usr/share/fonts/misc"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/local/"
    FontPath   "/usr/lib/X11/fonts/misc/"
    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/lib/X11/fonts/Speedo/"
    FontPath   "/usr/lib/X11/fonts/Type1/"
    FontPath   "/usr/lib/X11/fonts/TTF/"
    FontPath   "/usr/lib/X11/fonts/OTF/"
    FontPath   "/usr/lib/X11/fonts/cyrillic/"
    FontPath   "/usr/lib/X11/fonts/75dpi/"
    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier    "Keyboard1"
    Driver    "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option    "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"    "xorg"
    Option "XkbModel"    "pc105"
    Option "XkbLayout"    "us"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier    "Mouse1"
    Driver    "mouse"
    Option "Protocol"    "Auto"    # Auto detect
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"    "Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"    "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"    "9600"
#    Option "SampleRate"    "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5

#    HorizSync    30-64         # multisync
#    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-70

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier    "Standard VGA"
    VendorName    "Unknown"
    BoardName    "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam    256

#    Clocks    25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "** Intel i810 (generic)               [i810]"
    Driver      "i810"
    #VideoRam    262144
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "** Intel i810 (generic)               [i810]"
    Monitor     "My Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1600 1280
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1280 1024
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024"
        ViewPort    0 0
        Virtual     1280 800
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
    Mode 0666
EndSection

Есть ноут Asus x50vl
FreeBSD 7.0 stable на диске

Хочу поставить фрюху на ноут, при загрузке с сидюка пишет:

da0: Attempt to query device size failed: Not Ready, Medium not present
acd0: Failure - READ_BIG_MEDIUM ERROR asc=0x02 ascq=0x00
acd0: Failure - READ_BIG_MEDIUM ERROR asc=0x02 ascq=0x00
acd0: Failure - READ_BIG_MEDIUM ERROR asc=0x02 ascq=0x00
acd0: Failure - READ_BIG_MEDIUM ERROR asc=0x02 ascq=0x00
acd0: Failure - READ_BIG_MEDIUM ERROR asc=0x02 ascq=0x00
acd0: Failure - READ_BIG_MEDIUM ERROR asc=0x02 ascq=0x00
...

Диск не битый, пытался поставить другую версию!! че за фигня?
Че делать?

Доброго времени суток.
Мучаюсь с ноутбуком уже не первый месяц.
Интересует: у кого-нибудь стоит Linux или что-нибудь unix-like на этой модели?
Проблемы при установке в зависимости от дистрибутива, но на любой вкус и цвет:
1) Ethernet (eth0: transmission timed out)
2) не видит винтов
3) не видит звук
4) не работает usb
5) не знает кто такой dvd-rw и зачем он нужен
6) wi-fi не поднимается, не смотря на наличие всех драйверов

Вобщем целый цирк, количество перепробованных дистрибутивов превышает все разумные нормы.
Тако впечатление, что девайс специально конструировался таким образом, чтобы Linux туда
никогда не стал.

Доброго времени суток. Возникла проблема, из за которой до сих пор радую форточки своим присутствием... Не могу организовать gprs через Motorola a1200e (Ming).
Мандриву только что поставил, и освоение будет намного легче, при наличии в последней инета.
Пытаюсь шагнуть в мир пингвинов....эх....
Заранее благодарен Вам за отзывы и помощь в моей проблеме.

Вопрос, есть ли возможность подключить Палм к нету через блютух с помощью SE710i и где мона взять новые дрова на телы (Если конечно это возможно)?

asus f3ke при вставке наушников не пропадает звук в динамиках.
Стоят дрова от Realtek, с потдержкой моего чипа ALC660
подскажите что делать.

модули ядра
snd_pcm_oss            67456  0
snd_mixer_oss          34176  1 snd_pcm_oss
snd_seq                74992  0
snd_seq_device         25620  1 snd_seq
snd_hda_intel         369060  2
snd_pcm               108680  2 snd_pcm_oss,snd_hda_intel
snd_timer              42632  2 snd_seq,snd_pcm
snd                    84984  11 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer

Доброго времени суток.
Возникла потребность в связке мобильника и компьютера
посредством bluetooth.
Поставил bluez*, obex*. Проблема собственно:
сканирование нормально:
Scanning ...
        00:1E:A3:E0:0F:F0       Nokia 3110c
а вот с коннектом проблемы:
[root@naquad obexfs-0.8]# hcitool cc 00:1E:A3:E0:0F:F0
[root@naquad obexfs-0.8]# echo $?
0
[root@naquad obexfs-0.8]# hcitool con
Connections:
[root@naquad obexfs-0.8]#

таким образом просто не соединяется и файлы не перебрасывает :(
Как заставить это всё работать - ума не приложу :(
В одних мануалах говорят о rfcomm в других о hidd, в третьих о sdpd, а в
четвёртых о hcid.
Где правда и как заставить это работать?
На всяк пожарный:
/etc/bluetooth/hcid.conf
options {
        autoinit yes;
        security auto;
        pairing multi;
        passkey "5412";
}
device {
        name "Naquad (Linux)";
        class 0x120104;
        pkt_type DH1,DM1,HV1;
        iscan enable; pscan enable;
        lm accept;
        lp rswitch,hold,sniff,park;
        auth enable;
        encrypt enable;
}

/etc/sysconfig/hidd:
HIDDARGS="--server"

hciconfig -a:
hci0:   Type: USB
        BD Address: 00:11:67:5A:BC:68 ACL MTU: 678:8 SCO MTU: 48:10
        UP RUNNING PSCAN
        RX bytes:18270 acl:151 sco:0 events:613 errors:0
        TX bytes:9067 acl:151 sco:0 commands:275 errors:0
        Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'Naquad (Linux)'
        Class: 0x120104
        Service Classes: Networking, Object Transfer
        Device Class: Computer, Desktop workstation
        HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x1fe
        Manufacturer: Integrated System Solution Corp. (57)

P.S. Конечная задача: побросаться файлами и поюзать интернет-соединение телефона.

Добрый день.. такая проблема...
Решил  сменить  винду со всеми глюками на юникс....
Поставил убунту с лайф сиди...
Все определилось коректно.. но  звука нет (
В поисках  по  инету.. форумам.. собирал  новый драйвер алсы и после  перезагрузки вообще стало писать  что  нет  звуковухи ((

вот вам lspci
00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: <access denied>

00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0
        I/O ports at 1d00 [size=256]

00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: 66MHz, fast devsel, IRQ 10
        I/O ports at 3080 [size=64]
        I/O ports at 3040 [size=64]
        I/O ports at 3000 [size=64]
        Capabilities: <access denied>

00:01.2 RAM memory: nVidia Corporation Unknown device 0541 (rev a2)
        Flags: 66MHz, fast devsel

00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
        Memory at f0600000 (32-bit, non-prefetchable) [size=512K]

00:02.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2) (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at f0886000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:02.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2) (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at f0889000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

00:04.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2) (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at f0887000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:04.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2) (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at f0889400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

00:06.0 IDE interface: nVidia Corporation Unknown device 0560 (rev a1) (prog-if 8a [Master SecP PriP])
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        I/O ports at 30c0 [size=16]
        Capabilities: <access denied>

00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
        Memory at f0880000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2) (prog-if 01 [Subtractive decode])
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        Memory behind bridge: f0500000-f05fffff
        Capabilities: <access denied>

00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        I/O ports at 30f0 [size=8]
        I/O ports at 30e4 [size=4]
        I/O ports at 30e8 [size=8]
        I/O ports at 30e0 [size=4]
        I/O ports at 30d0 [size=16]
        Memory at f0884000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>

00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at f0888000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at 30f8 [size=8]
        Memory at f0889c00 (32-bit, non-prefetchable) [size=256]
        Memory at f0889800 (32-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>

00:0b.0 PCI bridge: nVidia Corporation Unknown device 0562 (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: cc000000-ceffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: <access denied>

00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: f0200000-f03fffff
        Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
        Capabilities: <access denied>

00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        Memory behind bridge: f0400000-f04fffff
        Capabilities: <access denied>

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel
        Capabilities: <access denied>

01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at f0500000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>

01:04.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at f0500800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

01:04.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at f0500c00 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

01:04.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at f0501000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

01:04.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at f0501400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

02:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M G (rev a1) (prog-if 00 [VGA])
        Subsystem: Acer Incorporated [ALI] Unknown device 0126
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
        I/O ports at 4000 [size=128]
        Capabilities: <access denied>

05:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
        Subsystem: AMBIT Microsystem Corp. Unknown device 0428
        Flags: fast devsel, IRQ 18
        Memory at f0400000 (64-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: <access denied>

Собственно обьясняю ситуацию =)

Решил с ноута сделать нормальный калькулятор со звуком ;) (шутка)

Обновил БИОС до версии 7.6(кардинальных изменений ненаблюдал)
В ноуте замечен баг. Когда загружаешь Фрюху с режимом enable ACPI то на проверке СиДюка(при работе с СД иногда вылетают ошибки типа Инкорект Аутпут/Инпут) всё нах виснит(
Посему гружусь в режиме disable ACPI
Ещё проблема... когда Флешку или иной ЮСБ девайс вставлять то всё тож нафиг виснит (данный феномен пока не могу понять).

Ну эт как бы в прошлом... можно закрыть глаза. Если загружатся в Безопасном режиме то всё вроде нормально работает(только флешку фиг распознаёт))

Ладно... теперь собственно самая большая проблема.
Пытаюсь поставить звук (звуковуха ESS Maestro2)
Загрузил sound
#kldload sound
в итоге при расмотрении устройств dmesg Фрюха дрова подобрать не смогла. ТОгда сам подгрузил snd_maestro и при выводе устройств Фрюха звуковуху приняло. тость:
pcm0: <ESS maestro...> irq 11 port 0x1000-0x10ff ...

Вооот...
спаял я потом этот драйвер вместе с ядром, так и оставил.

Дальше... запускаю КДЕ и вижу... (тоесть слышу) звука нет.
Думал всё по дефолту стоит по нулям... выставлял на максимум.. тоже тишина.
При запуски Ноатуна попытка проиграть песенку мр3, но счётчик стои... хотя вроде как бы плей активирован.

Зато если вставить обычный АудиоСД то через cdcontrol ноут музыку проигрывает.

вот собственно и вся ситуация...
помогите инвалиду интелектуального труда)
я незнаю куда уже копать... где и в чём я опять провтыкал...

Здравствйте.  Я понимаю, что дело не благодарное - Ставить Фрю на ноут(Acer Aspire 3684). Но вот все же попытался.. И пытаюсь уже 3 дня.  И разочаровался довольно серъёзно. Может вы мне поможете..

Вобщем сама проблема.

Я так понимаю У меня вся проблема в ACPI.
При загрузке с ACPI:

Сетевуху(Marvell) Не определяет, пищет, что марвел, а потом пишет, что неизвестный девайс.
Вай-фай(Atheros) - Определяет, но зааттачить не может.

При загрузке без ACPI:
Сетевуху определяет, но она периодически падает и встает. С периодичность в 10 минут примерно.
Вай-фай  -Определяет, но если я пытаюсь обращаться к нему - Пишет - Девайс не отвечает по таймоуту.
(Видимо Сей девайс включаеться через ACPI)
Как-то получилось у меня 1 раз завести вай-фа(при запущеном  КДЕ это было) Но не на долго, он опять отвалился и Фря мне вывалила ошибку ТАймОута.

Чего я только не перепробовал С ACPI делать. Весь инет перерыл, разные конфиги для него пытался юзать - Ничего.

Что интересно - Есть прожект такой http://code.google.com/p/aceracpi/
Но он под Линукс :(
Есть ли возможность скомпилить его под БСД ? Как вы считаете ?

http://aceracpi.googlecode.com/svn/trunk/dsdt/acer/aspire/ - ТУт лежат готовые ACPI под модели ACER, Но я пробовал их скармливать iasl. Он выдавал кучу ошибок, при загрузке - Паника.

Есть у вас какие нибудь мысли по этому поводу ?

Буду рад любой помощи ;-)

Здраствуйте. Помогите разобраться пожалуста с проблемой. Заключается в следующем: на ноуте стоит PC-BSD в ней я настроил телефон nokia, как gprs модем, подключение проходит, но страницы в броузере не открываются и адреса не пингуются. Подскажите кто знает((

Привет. Возник вопрос.
Есть ноутбук ASUS X51RL. Внутри встроенная карточка Atheros AR5006X. Я поставил Gentoo Linux (ядро 2.6.23-r8)на ноут и пытаюсь настроить wifi интерфейс. Взял самый новый драйвер с www.madwifi.org и устанавливал четко по инструкции (make && make install && modprobe ath_pci). Сборка и установка прошли успешно. Драйвер загрузился без ошибок, но интерфейса ath0 не появилось((
После перезагрузки посмотрел в dmesg: wifi%d: unable to attach hardware: revision isn't supported (HAL status 13) // пишу по памяти, так что возможны незначительные несовпаддения
Если кто знает как это лечится пишите.

Здраствуйте, у меня возникла проблема с настройкой wifi, чипсет realtek rtl8187b. Пробовал так:
ndiscvt -i .inf -s .sys -o ndis_driver_data.h
kldload ndis
но так почему-то не получается (( Подскажите как можно еще попробовать. Заранее спасибо  

Помогите настроить Моторолу А1200е Для выхода в интернет с телефона. Оператор МТС.

Проблема FreeBSD 5.1 & HP Compaq nx7400.
1 - Система грузится только с отключенным ACPI. Как бы вылечить
2 - X-ы не находят видеоадаптер. Как настроить (где драйвер взять или какой из комплекта подходит)?

Доброе время суток всем!
На ноутбуке Asus F5N напрочь нет звука, что только уже не делал:
1.Обновлял ядро до 2,6,24
2. Обновлял Alsa до версии 1,0,16.
При этом alsaconf видит звуковую карту и загружает модуль - snd-hda-intel, а звука как не было так и нет. В микшере естественно звук включен и прибавлен.
Но Windows проверял звук есть, так что проблем с железом нет.
В чем еще может быть проблема и как ее решить?
Заранее спасибо.
lspci
00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
00:01.2 RAM memory: nVidia Corporation Unknown device 0541 (rev a2)
00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
00:02.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2)
00:02.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2)
00:04.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2)
00:04.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2)
00:06.0 IDE interface: nVidia Corporation Unknown device 0560 (rev a1)
00:07.0 Audio device: nVidia Corporation Unknown device 055c (rev a1)
00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation Unknown device 0533 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
05:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01)

lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 004: ID 174f:6a31
Bus 003 Device 003: ID 0bda:0116 Realtek Semiconductor Corp.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
Bus 001 Device 001: ID 0000:0000

Есть желание установить linux на коммуникатор RoverPC S5. Может ли кто-нибудь рассказать как это сделать (дистрибутив+инструкция по установке)?

Ситуация значит в следующем:
Есть ноутбук с WiFi адаптером Intel(R) PRO/Wireless 2200BG
Есть точка доступа ZyXEL Zy B-420
Есть хаб на 8 портов
Есть сеть 192.168.10.0/24 и в ней сидит 3 машинки + сервак (192.168.10.1 соответственно)
Как выше писалось сервак Linu Mandriva 2007
Есть выход в инет с помощью pptp и маскарадинга

Все отлично работает когда соединено по провадам. И инет одновременно на всех машинах юзается и локалка видна.

А вот когд ноутбук снимаю с провода и конекчу по радио ... то тут пошли интересности:
в момент работы ноута на внешку (к примеру аська, апекс, и прочие приложения которые держат установленные соединения) локальная сетка не видна, и кроме 192.168.10.1 (сервак) ничего не видно, даже ту же самую точку доступа (192.168.10.10).

Когда обрубаю все соединения на внешку, то начинает пробиваться локалка, сначало с потерями (судя по пингам) потом вполне прилично и стабильно работает.*

точка роутится
лезу на неё
wifi> ip route status
Dest            FF Len Device     Gateway         Metric stat Timer  Use
192.168.10.0    00 24  enet1      192.168.10.10     1    001b 0      124
default         00 0   enet1      192.168.10.1      2    001b 0      0

тоесть, если правильно понимаю все запросы будут направлеы сразу на сервачек ...
не долго думаю делаю так

wifi> ip ping 192.168.10.5 (одна из машин в сети)
Resolving 192.168.10.5... 192.168.10.5
      sent      rcvd  rate    rtt     avg    mdev     max     min
         1         1  100      10      10       0      10      10
         2         2  100       0       9       3      10       0
         3         3  100       0       8       5      10       0

при этом слушая порт на сервачке
# tcpdump -i eth0 host 192.168.10.5
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
21:46:17.169000 arp who-has wifi.home.loc tell pc.home.loc

ага, увидел, а в случае если начинаю пинговать 192.168.10.5 с ноута по воздуху получаю:
Обмен пакетами с 192.168.10.5 по 32 байт

Превышен интервал ожидания для запроса.
Превышен интервал ожидания для запроса.
.... и т.д.

в это время на сервачке:
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
21:48:31.622334 arp who-has pc.home.loc tell 192.168.10.246
21:48:36.770605 arp who-has pc.home.loc tell 192.168.10.246
21:48:41.923721 arp who-has pc.home.loc tell 192.168.10.246

подскажите пжалуста где собака зарыта? буду весьма признателен. вторые сутки об стенку...
сильно не пинать, чайник за рулём))
хотел прошивку поменять для точки но кроме стандартной залитой более ничего не обнаружил.
на работе в радиосети ноут работает безотказо.
очень сильно грешу на точку и руки.
-----
* "потом вполне прилично и стабильно работает" - имел ввиду такие ньюансы, в обоих случаях бывают ситуации когда сеть теряется и происходит переподключение к ней ... не часто но бывает, и тоже не может не радвать (

Привет всем. Возникла проблемка небольшая, решить пока невыходит. Нужна ваша помщ.
Ситуация : У меня ACER Aspire5710z. Работал до этого на другом ноуте там проблем этих не было.
Проблема: Устанавливаю fedoraCore6, все вроде бы ничего, еслибы не два но. В ноуте стоит
Видуха ATI Radeon HD2300 и Wi-Fi Сетевуха Atheros ни то на то, ни на другое не могу найти дров
Киньте плс елси кто знает пару ссылок от куда можно скачать

Купил ноут acer aspire 5315 (051G08Mi) поставил на него Ubuntu 7.10 и не могу завести звук.
По лазил по инету, народ говорит что нужно поставить alsa 1.0.15 и в /etc/modprobe.d/alsa-base прописать options snd-hda-intel model=acer.
Все вроде нормально собралось, в микшере появились каналы, но только вот звука как небыло так и нет.

Приобрёл ACER TM 5520G встроенная сетевая Marvell Yukon 88E8071, на сайте марвелл последний драйвер mykbsd60x86-8.14.9.3, только бубен, не хочет с ним сетевуха подниматся, ядро не компилится с device myk запуск модулем kldload ./if_myk.ko не помогает, кто столкнулся с данной проблемой и смог решить пожалста подскажите куда копать, все возможные темы тут на форумах уже прочёл и попробовал, не катит. Гугл не помог...

Приобрёл ACER TM 5520G встроенная сетевая Marvell Yukon 88E8071, на сайте марвелл последний драйвер mykbsd60x86-8.14.9.3, только бубен, не хочет с ним сетевуха подниматся, ядро не компилится с device myk запуск модулем kldload ./if_myk.ko не помогает, кто столкнулся с данной проблемой и смог решить пожалста подскажите куда копать, все возможные темы тут на форумах уже прочёл и попробовал, не катит. Гугл не помог...

Всем привет!
Купил ноут Acer 5620g Extensa (Intel965/CoreDuo.1,5Ghz.2Mb/1Gb/AtiRadeonHD2400XT256Mb...)- на нем предустановлена Vista - решил снести и настроить под себя как привк (резервные копии сделал). При загрузке с установочного диска FreeBSD, после выбора варианта загрузки, стреляется без коментариев.
Пробовал разные версии, варианты загрузки и LiveCD-Frenzy - результат тот же. Пробовал ставить SuSE10 - не видит CDROM. От безысходности пробовал MacOSX, WinXP и Win2003Server - не видят жесткого диска. Из всего многообразия работает только LiveCD-Knoppix. C виндами и SuSE понятно - нужны дрова - под винду даже нашел. Подскажите как поставить FreeBSD.

Доброго времени суток всем.
Ситуация: ноутбук DELL INSPIRON 1501 с процессором AMD 64 Athlonx2  и видюхой от ATI Radeon Xpress 1150, операционная система OpenSUSE 10.3(пробовал варианты 32 и 64 разряда). Проблемы с запуском 3D. Каталист 7.12 не помогает(кстати, на Xpress 1150 под винь отдельно дрова есть, а под линух - нема).
Суть вопроса: руки кривеньки? головка слаба? или действительно проблема и как ее можно решить.

П.С.  пока в линуксах новичек, поэтому помощь очень нужна, сам вряд ли осилю

Всем доброго времени суток. Имеет место следующая проблема:

Есть машинка FreeBSD 6.2 release и PocketPC FS LOOX 550c
Погуглив, нашёл статью про подключение через модуль uppc.ko
Поправил исходник, как было сказано здесь:
http://icf.bofh.ru/~programist/SynCE-HOWTO/SynCE-HOWTO4.html
В итоге при включении Покета получаю:

ucom0: failed to set configuration, err=STALLED
device_attach: ucom0 attach returned 6

разумеется, /dev/ucom0 отсутствует

Загружены модули:
1   21 0xc0400000 6f6544   kernel
2    1 0xc0af7000 6c74     snd_ich.ko
3    2 0xc0afe000 68e48    sound.ko
4    1 0xc0b67000 8ea4     aio.ko
5    1 0xc0b70000 80b0     bridge.ko
6    1 0xc0b79000 1d278    kqemu.ko
7    1 0xc0b97000 c1fc     fuse.ko
8    1 0xc0ba4000 34674    if_myk.ko
9    2 0xc0bd9000 24d8     libmbpool.ko
10    1 0xc0bdc000 59f20    acpi.ko
12    4 0xc62df000 3000     ucom.ko
13    1 0xc5994000 3000     uppc.ko
14    1 0xc589b000 3000     uvisor.ko
15    1 0xc63d4000 4000     uplcom.ko

Ткните, где почитать! Яндекс и Гугль уже изшерстил весь! В гугле нашёл только 3 ссылки на форумы, где советовали погуглить :) Здесь тоже ничего не нашёл :(

Доброго времени суток. Есть ноут, есть линукс. Надо настроить железо так, чтобы оно все работало.  Проблема в том, что драйвера на сайте производителя под лин не лежат. Хочу драйвера для: (оговорюсь - драйвера на видео и вайфай, блутуз есть. Не работает кардридер, модем и глючит звук)

Pollux:/home/cats# lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc M52 [ATI Mobility Radeon X1300]
06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
06:02.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
06:04.4 FLASH memory: ENE Technology Inc Unknown device 0551 (rev 01)

ПыСы. в ядре драйверов нет или те, что работают через 3 раза :(

Собственно сабж.

Вопрос, если да, то какие тонкости при заказе/получении были?

Добрый день, вопрос такой :
Купил себе ноут HP Compaq 6720s. С ним в комплектации нет ни одного диска, машинка оборудована Windows Vista. На официальном сайте дрова вроде то же только для висты и для ХР. Есть где нибудь дрова для линукса?

Есть вот такая работающая машинка. К ней есть шлейф на

PC-USB ---\
Power  ----Connector-----Zaurus

Но к сожалению диск с дровами был утерян. Винда его не понимает, что логично.
Хотелось бы его перепрошить, никак :(
Звонил в офф. офис Sharp в Раше сказали что диск с драйверами вряд ли получится найти.
Поэтому обращаюсь к форумчанам, может у кого то есть сия штучка и диск к ней. Буду "очень благодарен" за образ. :)

Имеется ноут Dell Latitude 510 (ось стоит freebsd 6.2). У него встроенный модем. Не получается никак его завести в систему и заставить работать. Кто-нибудь уже смог это сделать и если да, подскажите плз как ...

#pciconf -lv
...
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW AC '97 Modem Controller'
    class    = simple comms
    subclass = generic modem